Related references
Note: Only part of the references are listed.Experimental evaluation of the effect in the stability and thermophysical properties of water-Al2O3 based nanofluids using SDBS as dispersant agent
Anderson Gallego et al.
ADVANCED POWDER TECHNOLOGY (2020)
Impact of different surfactants and ultrasonication time on the stability and thermophysical properties of hybrid nanofluids
Hong Wei Xian et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Inconel 718 machining performance evaluation using indigenously developed hybrid machining facilities: experimental investigation and sustainability assessment
Navneet Khanna et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Evaluation of tool wear, energy consumption, and surface roughness during turning of inconel 718 using sustainable machining technique
Navneet Khanna et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Sustainable turning of Inconel 718 nickel alloy using MQL strategy based on graphene nanofluids
Le Gong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
Turgay Kivak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties
Radoslaw W. Maruda et al.
TRIBOLOGY INTERNATIONAL (2020)
Experimental investigation on the performance of MQL drilling of AISI 321 stainless steel using nano-graphene enhanced vegetable-oil-based cutting fluid
Amrit Pal et al.
TRIBOLOGY INTERNATIONAL (2020)
Effects of reinforced nanoparticles with surfactant on surface quality and chip formation morphology in MQL-turning of superalloys
S. H. Musavi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
Cagri Vakkas Yildirim et al.
TRIBOLOGY INTERNATIONAL (2019)
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
Zafar Said et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental investigation of thermal conductivity and stability of TiO2-Ag/water nanocompositefluid with SDBS and SDS surfactants
Valan A. Arasu et al.
THERMOCHIMICA ACTA (2019)
Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625
Cagri Vakkas Yildirim
TRIBOLOGY INTERNATIONAL (2019)
Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
Senol Sirin et al.
TRIBOLOGY INTERNATIONAL (2019)
Evaluation of graphene based nano fluids with minimum quantity lubrication in turning of AISI D3 steel
M. Naresh Babu et al.
SN APPLIED SCIENCES (2019)
Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach
Kin Yuen Leong et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
Experimental evaluation of physicochemical properties and tapping torque of hexagonal boron nitride in modified jatropha oils-based as sustainable metalworking fluids
N. Talib et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
N. Talib et al.
TRIBOLOGY INTERNATIONAL (2018)
The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
Necati Ucak et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
Benkai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Stability, viscosity, thermal conductivity, and electrical conductivity enhancement of multi-walled carbon nanotube nanofluid using gum arabic
P. Ganesh Kumar et al.
FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2017)
Stabilising nanofluids in saline environments
Sarmad Al-Anssari et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)
A review based on the effect and mechanism of thermal conductivity of normal nanofluids and hybrid nanofluids
Pritam Kumar Das
JOURNAL OF MOLECULAR LIQUIDS (2017)
Experimental investigation on the effect of dispersant addition on thermal and rheological characteristics of TiO2 nanofluid
Samarshi Chakraborty et al.
POWDER TECHNOLOGY (2017)
Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance
K. S. Suganthi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Performance and mechanisms of graphene oxide suspended cutting fluid in the drilling of titanium alloy Ti-6Al-4V
Shuang Yi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
Yu Su et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids
Yee Ho Chai et al.
APPLIED THERMAL ENGINEERING (2016)
Performance evaluation of aluminium 6063 drilling under the influence of nanofluid minimum quantity lubrication
Sukhpal Singh Chatha et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A review on preparation, characterization, properties and applications of nanofluids
Dhinesh Kumar Devendiran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
R. Padmini et al.
TRIBOLOGY INTERNATIONAL (2016)
Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
Yanbin Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Performance Evaluation of Coated Carbide Tool in Machining of Stainless Steel (AISI 202) under Minimum Quantity Lubrication (MQL)
J. S. Dureja et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2015)
Progress of Nanofluid Application in Machining: A Review
Anuj Kumar Sharma et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Improvement of Near-Dry Machining and Its Effect on Tool Wear in Turning of AISI 4142
S. Amini et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Analysis of suspension stability for nanofluid applied in minimum quantity lubricant grinding
Cong Mao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Effects of surfactant on the stability and thermal conductivity of Al2O3/de-ionized water nanofluids
Guodong Xia et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
An experimental study on thermal conductivity and viscosity of nanofluids containing carbon nanotubes
Rad Sadri et al.
NANOSCALE RESEARCH LETTERS (2014)
Tool wear mechanisms in the machining of Nickel based super-alloys: A review
Waseem Akhtar et al.
FRONTIERS OF MECHANICAL ENGINEERING (2014)
Tool wear characteristics in machining of nickel-based superalloys
Dahu Zhu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Viscosity and thermal conductivity of dispersions of gum arabic capped MWCNT in water: Influence of MWCNT concentration and temperature
A. Indhuja et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2013)
Optimization of Tribological Performance of hBN/AL2O3Nanoparticles as Engine Oil Additives
Muhammad Ilman Hakimi Chua Abdullah et al.
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 (2013)
Measuring temperature of rotating cutting tools: Application to MQL drilling and dry milling of aerospace alloys
G. Le Coz et al.
APPLIED THERMAL ENGINEERING (2012)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Surface tension of Nanofluid-type fuels containing suspended nanomaterials
Saad Tanvir et al.
Nanoscale Research Letters (2012)
A tribological study of vegetable oil enhanced by nano-platelets and implication in MQL machining
Trung Kien Nguyen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Effect of Nano-Enhanced Lubricant in Minimum Quantity Lubrication Balling Milling
Kyung-Hee Park et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2011)
Nanofluid Surface Wettability Through Asymptotic Contact Angle
Saeid Vafaei et al.
LANGMUIR (2011)
Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
Abhay Bhatt et al.
TRIBOLOGY INTERNATIONAL (2010)
SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS
Y. B. Guo et al.
MACHINING SCIENCE AND TECHNOLOGY (2009)
Wettability of heated surfaces under pool boiling using surfactant solutions and nano-fluids
Yong Hoon Jeong et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)
Effects of temperature and strain range on fatigue cracking behavior in Hastelloy X
H. U. Hong et al.
MATERIALS LETTERS (2008)
Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids
X. F. Li et al.
THERMOCHIMICA ACTA (2008)
Thermal conductivity and lubrication characteristics of nanofluids
Y. Hwang et al.
CURRENT APPLIED PHYSICS (2006)
Nickel-based superalloys for advanced turbine engines: Chemistry, microstructure, and properties
TM Pollock et al.
JOURNAL OF PROPULSION AND POWER (2006)
Effect of MQL on the tool life of small twist drills in deep-hole drilling
R Heinemann et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Dry machining and minimum quantity lubrication
K Weinert et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Production of aqueous colloidal dispersions of carbon nanotubes
LQ Jiang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)
Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning
AS Varadarajan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys
E Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
The effects of thermal distortions on the diameter and cylindricity of dry drilled holes
M Bono et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Influence of pH and fluoride concentration on titanium passivating layer: stability of titanium dioxide
Y Fovet et al.
TALANTA (2001)
Share Paper
