Related references
Note: Only part of the references are listed.Influence of Nickel on the Oxidation Resistance at High Temperatures of Thin Chromium Coatings
Grzegorz Smola et al.
OXIDATION OF METALS (2019)
Microstructure and tribological properties of laser cladded self-lubricating nickel-base composite coatings containing nano-Cu and h-BN solid lubricants
Yue Zhao et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of substrates on the formation of Kirkendall voids in Sn/Cu joints
Jieshi Chen et al.
WELDING IN THE WORLD (2019)
Mechanical properties and microstructural stability of CuTa/Cu composite coatings
Amin Bahrami et al.
SURFACE & COATINGS TECHNOLOGY (2019)
The Zn accumulation behavior, phase evolution and void formation in Sn-xZn/Cu systems by considering trace Zn: a combined experimental and theoretical study
Jieshi Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
In situ construction and sensing mechanism of TiO2-WO3 composite coatings based on the semiconductor heterojunctions
Yangguang Yao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings
Amin Bahrami et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Fabrication of (Ta,W)C surface gradient layer on Ta-10W alloy by in situ solid-phase diffusion
Haiqiang Bai et al.
APPLIED SURFACE SCIENCE (2019)
Heat input, intermetallic compounds and mechanical properties of Al/steel cold metal transfer joints
Jin Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: A review
Bo Huang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Multipass and reciprocating microwear study of TiN based films
R. C. Moron et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Wetting behaviour of Zn-Al filler metal on a stainless steel substrate
Jinlong Yang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Preparation and property characterization of WS2 coatings deposited on micro-nano textured surfaces of cemented carbide at different WS2 target currents
Yunsong Lian et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Effect of solidification rate on martensitic transformation behavior and adiabatic magnetocaloric effect of Ni50Mn35In15 ribbons
C. O. Aguilar-Ortiz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
WC-Ni-Cr-based self-lubricating composites fabricated by pulsed electric current sintering with addition of WS2 solid lubricant
Xin-yang Huang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Solidification path of single-crystal nickel-base superalloys with minor carbon additions under laser rapid directional solidification conditions
Yao-Jian Liang et al.
SCRIPTA MATERIALIA (2017)
Laser cladding Ni-based alloy/nano-Ni encapsulated h-BN self-lubricating composite coatings
Hua Yan et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Microstructure evolution and enhanced vacuum tribological performance of Ni-doped WS2 composite coating
Shu-Sheng Xu et al.
SURFACE & COATINGS TECHNOLOGY (2017)
The effects of magnetic field-enhanced thermal spraying on the friction and wear characteristics of poly(ether-ether-ketone) coatings
J. Tharajak et al.
WEAR (2017)
Microstructure and sliding wear characterization of Cu/TiB2 copper matrix composites fabricated via friction stir processing
I. Dinaharan et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
The adjustment of microstructure and properties of TiC/NieCr composites by Mo addition applied for intermediate-temperature solid oxide fuel cell interconnects
Qian Qi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
The effect of TiC/Al2O3 composite ceramic reinforcement on tribological behavior of laser cladding Ni60 alloys coatings
Yangchuan Cai et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Improving the wear resistance of HVOF sprayed WC-Co coatings by adding submicron-sized WC particles at the splats' interfaces
Jianhui Yuan et al.
SURFACE & COATINGS TECHNOLOGY (2016)
WS2 nanoparticles anti-wear and friction reducing properties on rough surfaces in the presence of ZDDP additive
Paula Ussa Aldana et al.
TRIBOLOGY INTERNATIONAL (2016)
Surface modifying of SiC particles and performance analysis of SiCp/Cu composites
Hu Ming et al.
APPLIED SURFACE SCIENCE (2015)
The friction and wear behavior of Cu/Cu-MoS2 self-lubricating coating prepared by electrospark deposition
Tongkun Cao et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of WS2 addition on electrical sliding wear behaviors of Cu-graphite-WS2 composites
Gang Qian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Effect of ZrO2 addition on the dry sliding wear behavior of laser clad Ti6Al4V alloy
Babatunde Abiodun Obadele et al.
WEAR (2015)
Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC
M. R. Fernandez et al.
WEAR (2015)
Wear and friction behaviour of poly-ether-ether-ketone (PEEK) filled with graphene, WS2 and CNT nanoparticles
M. Kalin et al.
WEAR (2015)
Effects of graphite addition on the microstructure and properties of laser cladding Zr-Al-Ni-Cu amorphous coatings
Yanfang Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Dry sliding wear behavior of SS316L composites containing h-BN and MoS2 solid lubricants
S. Mahathanabodee et al.
WEAR (2014)
A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni-P) encapsulation
Xiu-Bo Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Solid lubricants: a review
T. W. Scharf et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Electrical sliding friction and wear properties of Cu-MoS2-graphite-WS2 nanotubes composites in air and vacuum conditions
Shiyin Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Study of wear and corrosion performance of thermal sprayed engineering polymers
Carlos R. C. Lima et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Microstructure and wear behaviors of laser clad NiCr/Cr3C2-WS2 high temperature self-lubricating wear-resistant composite coating
Mao-Sheng Yang et al.
APPLIED SURFACE SCIENCE (2012)
Microstructures and wear properties of YPSZ/CeO2 reinforced composites deposited by laser cladding
Li Jianing et al.
COMPOSITES PART B-ENGINEERING (2012)
Fabrication and evaluation of atmospheric plasma spraying WC-Co-Cu-MoS2 composite coatings
Jianhui Yuan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
High temperature fretting wear behavior of WC-25Co coatings prepared by D-gun spraying on Ti-Al-Zr titanium alloy
H. W. Liu et al.
TRIBOLOGY INTERNATIONAL (2011)
Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000 °C
S. M. Aouadi et al.
ACTA MATERIALIA (2010)
Microstructures and tribological properties of plasma sprayed WC-Co-Cu-BaF2/CaF2 self-lubricating wear resistant coatings
Jianhui Yuan et al.
APPLIED SURFACE SCIENCE (2010)
Dry sliding wear of Cu-15Ni-8Sn alloy
Shaozong Zhang et al.
TRIBOLOGY INTERNATIONAL (2010)
Tribochemical Behavior of Si3N4-hBN Ceramic Materials with Water Lubrication
Wei Chen et al.
TRIBOLOGY LETTERS (2010)
Ni-based alloy/submicron WS2 self-lubricating composite coating synthesized by Nd:YAG laser cladding
A. H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Ta2AlC and Cr2AlCAg-based composites -: New solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina
S. Gupta et al.
WEAR (2007)
High pressure X-ray diffraction study of tungsten disulfide
Einre Selvi et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2006)
Microstructure and dry sliding wear behavior of MoS2/TiC/Ni composite coatings prepared by laser cladding
J Xu et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Low-friction wear-resistant coatings for high-temperature foil bearings
H Heshmat et al.
TRIBOLOGY INTERNATIONAL (2005)
Slow release of fullerene-like WS2 nanoparticles from Fe-Ni graphite matrix:: A self-lubricating nanocomposite
L Rapoport et al.
NANO LETTERS (2001)
Share Paper
