Related references
Note: Only part of the references are listed.Pyrolysis Kinetics, Thermodynamics, and Volatiles of Representative Pine Wood with Thermogravimetry-Fourier Transform Infrared Analysis
Xiaokang Xu et al.
ENERGY & FUELS (2020)
Pyrolysis behavior of hydrochar from hydrothermal carbonization of pinewood sawdust
Jiawe Li et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)
Effects of low-temperature treatment on the properties of commercial preceramic polymers
Zlatomir D. Apostolov et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Interactions between oil shale and hydrogen-rich wastes during co-pyrolysis: 1. Co-pyrolysis of oil shale and polyolefins
Mao Mu et al.
FUEL (2020)
ICTAC Kinetics Committee recommendations for analysis of multi-step kinetics
Sergey Vyazovkin et al.
THERMOCHIMICA ACTA (2020)
Thermal behavior, kinetics and gas evolution characteristics for the co-pyrolysis of real-world plastic and tyre wastes
Qiang Hu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Study on pyrolysis behaviors of L-tyrosine-based phthalonitrile resin
Tao Zhou et al.
POLYMER TESTING (2020)
Fatigue damage investigation of ultra-large tire components
Wedam Nyaaba et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Pyrolysis of high ash sewage sludge: Kinetics and thermodynamic analysis using Coats-Redfern method
Salman Raza Naqvi et al.
RENEWABLE ENERGY (2019)
TGA/MS/FT-IR study for kinetic evaluation and evolved gas analysis of a biomass/PVC co-pyrolysis process
Gamzenur Ozsin et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thermal Degradation and Fire Behavior of High Performance Polymers
Aditya Ramgobin et al.
POLYMER REVIEWS (2019)
Thermal Stability and Decomposition Kinetics of Poly(Methacryloyloxyethyl Trimethyl Ammonium Chloride-Co-Acrylamide)
Xingqin Fu et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2019)
Pyrolysis kinetics of biomass wastes using isoconversional methods and the distributed activation energy model
Cindy Natalia Arenas et al.
BIORESOURCE TECHNOLOGY (2019)
Application of distributed activation energy models to polymer pyrolysis: Effects of distributed model selection, characteristics, validation, and sensitivity analysis
Mi Li et al.
FUEL (2019)
Thermal behavior and gas evolution characteristics during co-pyrolysis of lignocellulosic biomass and coal: A TG-FTIR investigation
Bowen Lin et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)
TG-MS-FTIR study on pyrolysis behavior of phthalonitrile resin
Bo Liang et al.
POLYMER DEGRADATION AND STABILITY (2019)
Thermal decomposition study and pyrolysis kinetics of coal and agricultural residues under non-isothermal conditions
Asma Ashraf et al.
FUEL (2019)
Latent curing epoxy system with excellent thermal stability, flame retardance and dielectric property
Ying-Jun Xu et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Rubber pyrolysis: Kinetic modeling and vulcanization effects
Sheng Liu et al.
ENERGY (2018)
Kinetics deconvolution study of multi-component pyrotechnics
Anirudha Ambekar et al.
THERMOCHIMICA ACTA (2018)
Thermal kinetic analysis of a complex process from a solid-state reaction by deconvolution procedure from a new calculation method and related thermodynamic functions of Mn0.90Co0.05Mg0.05HPO4•3H2O
Chuchai Sronsri et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Hydrogenation Process for Producing Light Petroleum Resins as Adhesive and Hot-Melt Components (Review)
S. V. Antonov et al.
PETROLEUM CHEMISTRY (2017)
Liquid-holdup regions research of novel reactive distillation column for C5 fraction separation
Liang Guo et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2017)
Thermal degradation study of pure rigid polyurethane in oxidative and non-oxidative atmospheres
Jia-Jia He et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)
A small eggshell Ni/SFC3R catalyst for C5 petroleum resin hydrogenation: preparation and characterization
Caiqin Wei et al.
RSC ADVANCES (2016)
Kinetic Study of the Thermal Decomposition of Potassium Chlorate Using the Non-isothermal TG/DSC Technique
Mohsen Ravanbod et al.
CENTRAL EUROPEAN JOURNAL OF ENERGETIC MATERIALS (2016)
Simplification and Intensification of a C5 Separation Process
Hsiao-Ching Hsu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Improved Heat and Solvent Resistance of a Pressure-Sensitive Adhesive Thermally Processable by Isocyanate Dimer Dissociation
Kazutaka Asada et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Oxidation of Petroleum Resin Based on Dicyclopentadiene Fraction
Vladimir Bondaletov et al.
16TH INTERNATIONAL SCIENTIFIC CONFERENCE CHEMISTRY AND CHEMICAL ENGINEERING IN XXI CENTURY DEDICATED TO PROFESSOR L.P. KULYOV (CCE 2015) (2015)
Effect of ambient temperature on stress, deformation and temperature of dump truck tire
Y. Li et al.
ENGINEERING FAILURE ANALYSIS (2012)
Synthesis and characterization of hydrogenated sorbic acid grafted dicyclopentadiene tackifier
Won-Suk Kong et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Application of mixture experimental design to optimize formulation and performance of thermoplastic road markings
S. M. Mirabedini et al.
PROGRESS IN ORGANIC COATINGS (2012)
Qualitative Analysis of Tackifier Resins in Pressure Sensitive Adhesives Using Direct Analysis in Real Time Time-of-Flight Mass Spectrometry
Aylin Mess et al.
ANALYTICAL CHEMISTRY (2011)
Nonisothermal Decomposition Kinetics of Abietic Acid in Argon Atmosphere
Weijian Nong et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
Sergey Vyazovkin et al.
THERMOCHIMICA ACTA (2011)
Pyrolysis kinetics of phenol-formaldehyde resin by non-isothermal thermogravimetry
Haiyun Jiang et al.
CARBON (2010)
Tack and Shear Strength of Adhesives Prepared from Styrene-Butadiene Rubber (SBR) Using Gum Rosin and Petro Resin as Tackifiers
B. T. Poh et al.
JOURNAL OF ADHESION (2010)
Color Improvment of C9 Hydrocarbon Resin by Hydrogenation Over 2% Pd/γ-Alumina Catalyst: Effect of Degree of Aromatic Rings Hydrogenation
Nikom Sae-Ma et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Simulation of the C5 Aliphatic Petroleum Resins Production Process
B. Berahman et al.
PETROLEUM SCIENCE AND TECHNOLOGY (2010)
Critical study of the isoconversional methods of kinetic analysis
J. M. Criado et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)
On problems of isoconversion data processing for reactions in Al-rich Al-MoO3 thermites
Swati M. Umbrajkar et al.
THERMOCHIMICA ACTA (2008)
Novel rubbers from cationic copolymerization of soybean oils and dicyclopentadiene. 1. Synthesis and characterization
DD Andjelkovic et al.
BIOMACROMOLECULES (2006)
Determination of residual monomer in polymer latex by full evaporation headspace gas chromatography
XS Chai et al.
JOURNAL OF CHROMATOGRAPHY A (2004)
Production of high-purity dicyclopentadiene from the C5 fraction of hydrocarbon pyrolysis
EV Nurullina et al.
RUSSIAN JOURNAL OF APPLIED CHEMISTRY (2001)
Share Paper
