Related references
Note: Only part of the references are listed.Reconstructing full-field flapping wing dynamics from sparse measurements
William Johns et al.
BIOINSPIRATION & BIOMIMETICS (2021)
Mechanics-based model updating for identification and virtual sensing of an offshore wind turbine using sparse measurements
Mansureh-Sadat Nabiyan et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2021)
A methodology to design measurement systems when multiple model classes are plausible
Numa J. Bertola et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2021)
A unified sampling-based framework for optimal sensor placement considering parameter and prediction inference
C. Argyris et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
A general substructure-based framework for input-state estimation using limited output measurements
K. E. Tatsis et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
A finite element model updating method based on global optimization
Maria Girardi et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Expansion of experimental mode shape from operational modal analysis and virtual sensing for fatigue analysis using the modal expansion method
Marius Tarpo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Robust damage detection using Bayesian virtual sensors
Jyrki Kullaa
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)
Optimal sensor configuration for ultrasonic guided-wave inspection based on value of information
Sergio Cantero-Chinchilla et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)
Robust damage detection in the time domain using Bayesian virtual sensing with noise reduction and environmental effect elimination capabilities
Jyrki Kullaa
JOURNAL OF SOUND AND VIBRATION (2020)
Strain estimation for offshore wind turbines with jacket substructures using dual-band modal expansion
M. Henkel et al.
MARINE STRUCTURES (2020)
A Genetic Algorithm Procedure for the Automatic Updating of FEM Based on Ambient Vibration Tests
Francesca Bianconi et al.
SENSORS (2020)
Exploiting convexification for Bayesian optimal sensor placement by maximization of mutual information
Pinaky Bhattacharyya et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2020)
Emerging Trends in Optimal Structural Health Monitoring System Design: From Sensor Placement to System Evaluation
Robert James Barthorpe et al.
JOURNAL OF SENSOR AND ACTUATOR NETWORKS (2020)
Structural health monitoring and fatigue damage estimation using vibration measurements and finite element model updating
Dimitrios Giagopoulos et al.
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)
Submodularity issues in value-of-information-based sensor placement
C. Malings et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)
Information-Theoretic Approach for Identifiability Assessment of Nonlinear Structural Finite-Element Models
Hamed Ebrahimian et al.
JOURNAL OF ENGINEERING MECHANICS (2019)
Finite element model updating using deterministic optimisation: A global pattern search approach
Benedikt Hofmeister et al.
ENGINEERING STRUCTURES (2019)
Bayesian virtual sensing in structural
J. Kullaa
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Operational Modal Analysis Based Stress Estimation in Friction Systems
Marius Tarpo et al.
NONLINEAR DYNAMICS, VOL 1 (2019)
Structural Identification for Dynamic Strain Estimation in Wind Turbine Towers
Mansure Nabiyan et al.
DYNAMICS OF CIVIL STRUCTURES, VOL 2 (2019)
Cost-Benefit Optimization of Structural Health Monitoring Sensor Networks
Giovanni Capellari et al.
SENSORS (2018)
Underwater Dynamic Response at Limited Points Expanded to Full-Field Strain Response
Yuanchang Chen et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2018)
Structural Health Monitoring Sensor Network Optimization through Bayesian Experimental Design
Giovanni Capellari et al.
ASCE-ASME JOURNAL OF RISK AND UNCERTAINTY IN ENGINEERING SYSTEMS PART A-CIVIL ENGINEERING (2018)
Optimal Multi-Type Sensor Placement for Structural Identification by Static-Load Testing
Numa Joy Bertola et al.
SENSORS (2017)
Fatigue assessment of offshore wind turbines on monopile foundations using multi-band modal expansion
Alexandros Iliopoulos et al.
WIND ENERGY (2017)
Strain estimation of truss structures based on augmented Kalman filtering and modal expansion
Peng Ren et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
Modal Expansion using Strain Mode Shapes
Javad Baqersad et al.
SHOCK & VIBRATION, AIRCRAFT/AEROSPACE, ENERGY HARVESTING, ACOUSTICS & OPTICS, VOL 9: PROCEEDINGS OF THE 35TH IMAC (2017)
Bayesian optimal experimental design for parameter estimation and response predictions in complex dynamical systems
Costas Papadimitriou et al.
X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) (2017)
Computational Framework for Online Estimation of Fatigue Damage using Vibration Measurements from a Limited Number of Sensors
Dimitrios Giagopoulos et al.
X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) (2017)
Bayesian virtual sensing for full-field dynamic response estimation
Jyrki Kullaa
X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) (2017)
Entropy-Based Optimal Sensor Placement for Model Identification of Periodic Structures Endowed with Bolted Joints
Tao Yin et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2017)
Measurement system design for civil infrastructure using expected utility
Romain Pasquier et al.
ADVANCED ENGINEERING INFORMATICS (2017)
Robust optimal sensor placement for operational modal analysis based on maximum expected utility
Binbin Li et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
A modal decomposition and expansion approach for prediction of dynamic responses on a monopile offshore wind turbine using a limited number of vibration sensors
Alexandros Iliopoulos et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
Dynamic strain estimation for fatigue assessment of an offshore monopile wind turbine using filtering and modal expansion algorithms
K. Maes et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
Value of information for spatially distributed systems: Application to sensor placement
Carl Malings et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2016)
Bayesian system identification of dynamical systems using highly informative training data
P. L. Green et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)
OPTIMAL SENSOR PLACEMENT FOR THE ESTIMATION OF TURBULENCE MODEL PARAMETERS IN CFD
Dimitrios I. Papadimitriou et al.
INTERNATIONAL JOURNAL FOR UNCERTAINTY QUANTIFICATION (2015)
Efficient Bayesian sensor placement algorithm for structural identification: a general approach for multi-type sensory systems
Ka-Veng Yuen et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2015)
Hierarchical Sensor Placement Using Joint Entropy and the Effect of Modeling Error
Maria Papadopoulou et al.
ENTROPY (2014)
Dual-type sensor placement for multi-scale response reconstruction
Xiao-Hua Zhang et al.
MECHATRONICS (2014)
Strain modes based dynamic displacement estimation of beam structures with strain sensors
Zuo-Cai Wang et al.
SMART MATERIALS AND STRUCTURES (2014)
Real-time deformed shape estimation of a wind turbine blade using distributed fiber Bragg grating sensors
Hong-Il Kim et al.
WIND ENERGY (2014)
Displacement Estimation Using Multimetric Data Fusion
Jong-Woong Park et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2013)
Simulation-based optimal Bayesian experimental design for nonlinear systems
Xun Huan et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2013)
Comparison of Full Field Strain Distributions to Predicted Strain Distributions from Limited Sets of Measured Data for SHM Applications
Peter Avitabile et al.
DAMAGE ASSESSMENT OF STRUCTURES X, PTS 1 AND 2 (2013)
Shape Monitoring of a Beam Structure from Measured Strain or Curvature
R. Glaser et al.
EXPERIMENTAL MECHANICS (2012)
Sensor placement for modal identification
Cyrille Stephan
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)
The effect of prediction error correlation on optimal sensor placement in structural dynamics
Costas Papadimitriou et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)
Information entropy based algorithm of sensor placement optimization for structural damage detection
S. Q. Ye et al.
SMART STRUCTURES AND SYSTEMS (2012)
Fatigue predictions in entire body of metallic structures from a limited number of vibration sensors using Kalman filtering
Costas Papadimitriou et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2011)
Optimal sensor configuration of a typical transmission tower for the purpose of structural model updating
H. M. Chow et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2011)
A Bayesian Probabilistic Approach for Crack Characterization in Plate Structures
Tao Yin et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2010)
Displacement field estimation for a two-dimensional structure using fiber Bragg grating sensors
Stephan Rapp et al.
SMART MATERIALS AND STRUCTURES (2009)
Likelihood approximation by numerical integration on sparse grids
Florian Heiss et al.
JOURNAL OF ECONOMETRICS (2008)
Configuration of measurement systems using Shannon's entropy function
Y Robert-Nicoud et al.
COMPUTERS & STRUCTURES (2005)
Optimal experimental design in stochastic structural dynamics
C Papadimitriou et al.
PROBABILISTIC ENGINEERING MECHANICS (2005)
Optimal sensor placement methodology for parametric identification of structural systems
C Papadimitriou
JOURNAL OF SOUND AND VIBRATION (2004)
Estimating expected information gains for experimental designs with application to the random fatigue-limit model
KJ Ryan
JOURNAL OF COMPUTATIONAL AND GRAPHICAL STATISTICS (2003)
Reducing the time complexity of the derandomized evolution strategy with covariance matrix adaptation (CMA-ES)
N Hansen et al.
EVOLUTIONARY COMPUTATION (2003)
Optimal sensor placement methodology for identification with unmeasured excitation
KV Yuen et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2001)
Placement of sensors/actuators on civil structures using genetic algorithms
MM Abdullah et al.
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2001)
Entropy-based optimal sensor location for structural model updating
C Papadimitriou et al.
JOURNAL OF VIBRATION AND CONTROL (2000)
Impact Location and Quantification on a Composite Panel using Neural Networks and a Genetic Algorithm
K. Worden et al.
STRAIN (2000)
Optimal sensor location for parameter estimation of distributed processes
D Ucinski
INTERNATIONAL JOURNAL OF CONTROL (2000)
Share Paper
