Related references
Note: Only part of the references are listed.Implementation of periodic boundary conditions for loading of mechanical metamaterials and other complex geometric microstructures using finite element analysis
Luke Mizzi et al.
ENGINEERING WITH COMPUTERS (2021)
Mechanisms of failure in coal samples from underground water reservoir
Qiangling Yao et al.
ENGINEERING GEOLOGY (2020)
Surrounding rock failure analysis of retreating roadways and the control technique for extra-thick coal seams under fully-mechanized top caving and intensive mining conditions: A case study
Hong Yan et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
Case study on pressure-relief mining technology without advance tunneling and coal pillars in longwall mining
Yajun Wang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
Stress-strain relationship in elastic stage of fractured rock mass
Faquan Wu et al.
ENGINEERING GEOLOGY (2020)
Monitoring the strata behavior in the Destressed Zone of a shallow Indian longwall panel with hard sandstone cover using Mine-Microseismicity and Borehole Televiewer data
Debjeet Mondal et al.
ENGINEERING GEOLOGY (2020)
Examination of Mean Stress Calculation Approaches in Rock Mechanics
Ke Gao et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Generalised Analytical Models for the Strength of the Inclined as well as the Flat Coal Pillars using Rock Mass Failure Criterion
Arka Jyoti Das et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Assessment of the Strength of Inclined Coal Pillars through Numerical Modelling based on the Ubiquitous Joint Model
Arka Jyoti Das et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
True Triaxial Experimental Investigation of Rock Response Around the Mine-By Tunnel Under an In Situ 3D Stress Path
Qingsheng Bai et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Uncertainty in In Situ Stress Estimations: A Statistical Simulation to Study the Effect of Numbers of Stress Measurements
Yu Feng et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Effect of Shear Stresses on Pillar Stability: A Back Analysis of the Troy Mine Experience to Predict Pillar Performance at Montanore Mine
T. Garza-Cruz et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
A numerical study of stress variability in heterogeneous fractured rocks
Qinghua Lei et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Methodology for Establishing Comprehensive Stress Paths in Rocks During Hollow Cylinder Testing
Zhen Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Performance of inclined pillars with a major discontinuity
K. Jessu et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)
Scalar-valued measures of stress dispersion
Ke Gao et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Multivariate distribution model for stress variability characterisation
Ke Gao et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Prediction of relative displacement for entry roof with weak plane under the effect of mining abutment stress
Wen-long Shen et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)
Separation and fracturing in overlying strata disturbed by longwall mining in a mineral deposit seam
Shaofeng Wang et al.
ENGINEERING GEOLOGY (2017)
Evaluation of stability of underground workings for exploitation of an inclined coal seam by the ubiquitous joint model
A. J. Das et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Generation of random stress tensors
Ke Gao et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Influence of Large Syncline on In Situ Stress Field: A Case Study of the Kaiping Coalfield, China
Jun Han et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Rotation of principal axes and changes of stress due to mine-induced stresses
J. Ptacek et al.
CANADIAN GEOTECHNICAL JOURNAL (2015)
In situ strength and failure mechanisms of migmatitic gneiss and pegmatitic granite at the nuclear waste disposal site in Olkiluoto, Western Finland
T. Siren et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Mechanistic Analysis of Rock Damage Anisotropy and Rotation Around Circular Cavities
Hao Xu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
A numerical study of stress changes in barrier pillars and a border area in a longwall coal mine
Mahdi Shabanimashcool et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY (2013)
The Stress State of the Earth's Lithosphere: Results of Statistical Processing of the World Stress-Map Data
A. I. Koptev et al.
MOSCOW UNIVERSITY GEOLOGY BULLETIN (2013)
Assessment of mining induced stress development over coal pillars during depillaring
A. K. Singh et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Empirical approach for designing of support system in mechanized coal pillar mining
A. Kushwaha et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)
Numerical simulation of coal pillar strength
Ashok Jaiswal et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
The Effect of the Stress Path on Squeezing Behavior in Tunneling
Linard Cantieni et al.
ROCK MECHANICS AND ROCK ENGINEERING (2009)
Underpinning-based simultaneous extraction of contiguous sections of a thick coal seam under weak and laminated parting
P. K. Mandal et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)
Exploitation of developed coal mine pillars by shortwall mining - a case example
A Kushwaha et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2005)
Descriptive measures of multivariate scatter and linear dependence
D Peña et al.
JOURNAL OF MULTIVARIATE ANALYSIS (2003)
Influence of elastic constants on the horizontal in situ stress
PR Sheorey et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)
Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face
E Eberhardt
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)
Mining-induced stress change and consequences of stress path on excavation stability - a case study
PK Kaiser et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)
Share Paper
