4.7 Article

Towards limiting potential domino effects from single flammable substance release in chemical complexes by risk-based shut down of critical nearby process units

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Experimental and numerical study on the effect of low vent burst pressure on vented methane-air deflagrations

Shengchao Rui et al.

Summary: This study experimentally investigated the effect of low vent burst pressure on methane-air deflagrations in a rectangular vessel, observing four different overpressure peaks and monitoring flame behaviors at each peak. The results showed that vent burst pressure affects P-open and P-acc, while P-out and P-ext are independent of vent burst pressure. Double flame accelerations were observed due to vent rupture and flame venting. Predictions reasonably agreed with experimental data, with discrepancies decreasing as vent burst pressure increased. Predicted maximum peak overpressure and external flame length were slightly larger than experimental values, providing better guidance for safe design and risk assessment in explosion venting.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Engineering, Environmental

Developing an advanced dynamic risk analysis method for fire-related domino effects

Tao Zeng et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Engineering, Environmental

Numerical simulation on methane-hydrogen explosion in gas compartment in utility tunnel

Shuhao Zhang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Engineering, Industrial

Dynamic vulnerability assessment of process plants with respect to vapor cloud explosions

Chao Chen et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Review Engineering, Chemical

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

Ruiqing Shen et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)

Article Engineering, Environmental

A dynamic and simulation-based method for quantitative risk assessment of the domino accident in chemical industry

Zhichao He et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Article Engineering, Industrial

A novel approach for domino effects modeling and risk analysis based on synergistic effect and accident evidence

Long Ding et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Article Engineering, Chemical

Cost benefit analysis approach for the management of industrial safety in chemical and petrochemical industry

Chiara Vianello et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

Article Engineering, Environmental

Dynamic domino effect risk assessment using Petri-nets

Mohammad Zaid Kamil et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Environmental

Numerical and analytical prediction of pressure and impulse from vented gas explosion in large cylindrical tanks

Jingde Li et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Environmental

Numerical simulation and applications of equivalent film thickness in oil evaporation loss evaluation of internal floating-roof tank

Weiqiu Huang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Environmental

Modelling an integrated impact of fire, explosion and combustion products during transitional events caused by an accidental release of LNG

Til Baalisampang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Chemical

Detonations in industrial vapour cloud explosions

Geoffrey Chamberlain et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

Article Engineering, Environmental

Comparison of k-ε models in gaseous release and dispersion simulations using the CFD code FLACS

Alexander Moen et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Environmental

Flexible alarming mechanism of a general GDS deployment for explosive accidents caused by gas leakage

Xin-ge Qi et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Chemical

Vented gas explosion overpressure prediction of obstructed cubic chamber by Bayesian Regularization Artificial Neuron Network - Bauwens model

Jihao Shi et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2018)

Article Engineering, Environmental

A matrix-based modeling and analysis approach for fire-induced domino effects

Jianfeng Zhou et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Engineering, Environmental

Texas LPG fire: Domino effects triggered by natural hazards

Mohsen Naderpour et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Engineering, Environmental

Far-field pressure prediction of a vented gas explosion from storage tanks by using new CFD simulation guidance

Jingde Li et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Engineering, Environmental

CFD methodology for simulation of LNG spills and rapid phase transition (RPT)

Andrei Horvat

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Engineering, Environmental

Shock waves and condensation clouds from industrial BLEVEs and VCEs

Albrecht Michael Birk

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)

Article Engineering, Chemical

Application of loss functions in process economic risk assessment

Faisal Khan et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)

Article Engineering, Chemical

Explosion loading on equipment fiom CFD simulations

Olav R. Hansen et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2016)

Article Engineering, Chemical

Gas dispersion risk analysis of safety gap effect on the innovating FLNG vessel with a cylindrical platform

Jingde Li et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2016)

Article Engineering, Environmental

Operational risk assessment: A case of the Bhopal disaster

Ming Yang et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)

Article Engineering, Industrial

Assessment of domino effect: State of the art and research Needs

Necci Amos et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Article Engineering, Environmental

Combustion products toxicity risk assessment in an offshore installation

Mohammad Dadashzadeh et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2014)

Article Public, Environmental & Occupational Health

Domino Effect Analysis Using Bayesian Networks

Nima Khakzad et al.

RISK ANALYSIS (2013)

Article Engineering, Marine

Quantitative assessment of hydrocarbon explosion and fire risks in offshore installations

Jeom Kee Paik et al.

MARINE STRUCTURES (2011)

Article Engineering, Chemical

Advanced CFD modeling on vapor dispersion and vapor cloud explosion

Anna Qiao et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2010)

Article Engineering, Chemical

Validation of FLACS against experimental data sets from the model evaluation database for LNG vapor dispersion

Olav R. Hansen et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2010)

Article Engineering, Chemical

Validation of CFD-model for hydrogen dispersion

Prankul Middha et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2009)

Article Engineering, Environmental

The assessment of risk caused by domino effect in quantitative area risk analysis

V Cozzani et al.

JOURNAL OF HAZARDOUS MATERIALS (2005)

Article Engineering, Chemical

New generic leak frequencies for process equipment

J Spouge

PROCESS SAFETY PROGRESS (2005)

Article Engineering, Environmental

The quantitative assessment of domino effects caused by overpressure - Part I. Probit models

V Cozzani et al.

JOURNAL OF HAZARDOUS MATERIALS (2004)