Related references
Note: Only part of the references are listed.Effect of turbulence modeling on hydrodynamics of a turbulent contact absorber
Atta Ullah et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Bubble-based EMMS/DP drag model for MP-PIC simulation
Tagir Kadyrov et al.
POWDER TECHNOLOGY (2020)
Fluidized bed CFD using simplified solid-phase coupling
Farhana Diba et al.
POWDER TECHNOLOGY (2020)
Extending the EMMS-bubbling model to fluidization of binary particle mixture: Parameter analysis and model validation
Nouman Ahmad et al.
CHEMICAL ENGINEERING SCIENCE (2019)
CPFD simulation on effects of louver baffles in a two-dimensional fluidized bed of Geldart A particles
Zhijun Yang et al.
ADVANCED POWDER TECHNOLOGY (2019)
CFD simulations of a full-loop CFB reactor using coarse-grained Eulerian-Lagrangian dense discrete phase model: Effects of modeling parameters
Adnan Muhammad et al.
POWDER TECHNOLOGY (2019)
Model for Predicting Solids Velocity Fluctuations in Sedimenting Suspensions
Ali Shehryar et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2019)
CFD simulation of a spouted bed: Comparison between the Discrete Element Method (DEM) and the Two Fluid Model (TFM)
Cristina Moliner et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Comprehensive investigation and comparison of TFM, DenseDPM and CFD-DEM for dense fluidized beds
Peter Ostermeier et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Numerical simulation of circulating fluidized bed oxy-fuel combustion with Dense Discrete Phase Model
Ying Wu et al.
FUEL PROCESSING TECHNOLOGY (2019)
Multi-scale CFD modeling of gas-solid bubbling fluidization accounting for sub-grid information
Kun Hong et al.
ADVANCED POWDER TECHNOLOGY (2018)
Influence of drag laws on pressure and bed material recirculation rate in a cold flow model of an 8 MW dual fluidized bed system by means of CPFD
Stephan Kraft et al.
PARTICUOLOGY (2018)
Numerical calculation of wall-to-bed heat transfer coefficients in Geldart B bubbling fluidized beds with immersed horizontal tubes
Peter Ostermeier et al.
POWDER TECHNOLOGY (2018)
A sub-grid EMMS drag for multiphase particle-in-cell simulation of fluidization
Feifei Song et al.
POWDER TECHNOLOGY (2018)
Parametric study for MP-PIC simulation of bubbling fluidized beds with Geldart A particles
Meiyan Feng et al.
POWDER TECHNOLOGY (2018)
Application of the Numerical Techniques for Modelling Fluidization Process Within Industrial Scale Boilers
Wojciech P. Adamczyk
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2017)
Numerical investigation of particle transport hydrodynamics and coal combustion in an industrial-scale circulating fluidized bed combustor: Effects of coal feeder positions and coal feeding rates
Massoud Massoudi Farid et al.
FUEL (2017)
Three dimensional multi fluid modeling of Geldart B bubbling fluidized bed with complex inlet geometries
Peter Ostermeier et al.
POWDER TECHNOLOGY (2017)
Comparisons of Eulerian-Eulerian and CFD-DEM simulations of mixing behaviors in bubbling fluidized beds
Jian Le Lee et al.
POWDER TECHNOLOGY (2017)
Numerical investigation and comparison of coarse grain CFD-DEM and TFM in the case of a 1 MWth fluidized bed carbonator simulation
A. Nikolopoulos et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Comparison of three different CFD methods for dense fluidized beds and validation by a cold flow experiment
Alexander Stroh et al.
PARTICUOLOGY (2016)
Focusing on mesoscales: from the energy-minimization multiscale model to mesoscience
Jinghai Li et al.
CURRENT OPINION IN CHEMICAL ENGINEERING (2016)
CFD simulations of gas-solid flow in an industrial-scale circulating fluidized bed furnace using subgrid-scale drag models
Srujal Shah et al.
PARTICUOLOGY (2015)
3D Eulerian modeling of thin rectangular gas-solid fluidized beds: Estimation of the specularity coefficient and its effects on bubbling dynamics and circulation times
C. Altantzis et al.
POWDER TECHNOLOGY (2015)
Eulerian-Eulerian simulation of dense solid-gas cylindrical fluidized beds: Impact of wall boundary condition and drag model on fluidization
A. Bakshi et al.
POWDER TECHNOLOGY (2015)
Verification of sub-grid filtered drag models for gas-particle fluidized beds with immersed cylinder arrays
Avik Sarkar et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Comparison of the standard Euler-Euler and hybrid Euler-Lagrange approaches for modeling particle transport in a pilot-scale circulating fluidized bed
Wojciech P. Adamczyk et al.
PARTICUOLOGY (2014)
Extending the bubble-based EMMS model to CFB riser simulations
Kun Hong et al.
POWDER TECHNOLOGY (2014)
A comparison of two-fluid model, dense discrete particle model and CFD-DEM method for modeling impinging gas-solid flows
Xizhong Chen et al.
POWDER TECHNOLOGY (2014)
A comparative study on the influence of the gas flow rate on the hydrodynamics of a gas-solid spouted fluidized bed using Euler-Euler and Euler-Lagrange/DEM models
Naser Almohammed et al.
POWDER TECHNOLOGY (2014)
A structure-dependent multi-fluid model (SFM) for heterogeneous gas-solid flow
Kun Hong et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Comparison of Two-Fluid and Discrete Particle Modeling of Dense Gas-Particle Flows in Gas-Fluidized Beds
Junwu Wang et al.
CHEMIE INGENIEUR TECHNIK (2013)
An EMMS-based multi-fluid model (EFM) for heterogeneous gas-solid riser flows: Part I. Formulation of structure-dependent conservation equations
Kun Hong et al.
CHEMICAL ENGINEERING SCIENCE (2012)
MP-PIC simulation of CFB riser with EMMS-based drag model
Fei Li et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Validation Studies on Filtered Model Equations for Gas-Particle Flows in Risers
Yesim Igci et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Influence of two- and three-dimensional simulations on bubble behavior in gas-solid fluidized beds with and without immersed horizontal tubes
Teklay Weldeabzgi Asegehegn et al.
POWDER TECHNOLOGY (2012)
3D CFD simulation of hydrodynamics of a 150 MWe circulating fluidized bed boiler
Nan Zhang et al.
CHEMICAL ENGINEERING JOURNAL (2010)
An advanced EMMS scheme for the prediction of drag coefficient under a 1.2 MWth CFBC isothermal flow-Part I: Numerical formulation
A. Nikolopoulos et al.
CHEMICAL ENGINEERING SCIENCE (2010)
A multiscale mass transfer model for gas-solid riser flows: Part 1 - Sub-grid model and simple tests
Weigang Dong et al.
CHEMICAL ENGINEERING SCIENCE (2008)
A multiscale mass transfer model for gas-solid riser flows: Part II - Sub-grid simulation of ozone decomposition
Weigang Dong et al.
CHEMICAL ENGINEERING SCIENCE (2008)
Detailed measurements of flow structure inside a dense gas-solids fluidized bed
Haiyan Zhu et al.
POWDER TECHNOLOGY (2008)
Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed
M Chiesa et al.
COMPUTERS & CHEMICAL ENGINEERING (2005)
The role of meso-scale structures in rapid gas-solid flows
K Agrawal et al.
JOURNAL OF FLUID MECHANICS (2001)
Multiscale nature of complex fluid-particle systems
JH Li et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
Share Paper
