☆ 4.6 Article

On the magnetized 3D flow of hybrid nanofluids utilizing nonlinear radiative heat transfer

PHYSICA SCRIPTA (2021)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A techno-economic investigation of 2D and 3D configurations of fins and their effects on heat sink efficiency of MHD hybrid nanofluid with slip and non-slip flow

Man-Wen Tian et al.

Summary: This paper studies mixed convection heat transfer and considers the effect of a magnetic field on heat dissipation in a rectangular enclosure. Numerical simulations investigate the impact of different heat sink lengths and types on entropy generation rate and Nusselt number.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

MHD Marangoni boundary layer problem for hybrid nanofluids with thermal radiation

Emad H. Aly et al.

Summary: The purpose of this paper is to study the flow of the Marangoni boundary layer on the surface embedded in a porous medium saturated by a hybrid nanofluid in the presence of a magnetic field and thermal radiation. By converting the governing model into ordinary differential equations and using Laplace transform, the influence of various parameters on the velocity profile and temperature distribution was investigated. The results show that the velocity and temperature are affected by parameters such as copper-nanoparticles volume fraction, magnetic field, injection, and radiation.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

MHD hybrid nanofluid flow over a permeable stretching/shrinking sheet with thermal radiation effect

Ubaidullah Yashkun et al.

Summary: This study investigates the heat transfer characteristics of MHD hybrid nanofluid over a linear stretching and shrinking surface with suction and thermal radiation effects. The study finds that the heat transfer efficiency of the hybrid nanofluid is greater than the nanofluid, and dual solutions exist for a specific range of the stretching/shrinking parameter. Additionally, the skin friction coefficient and local Nusselt number increase with suction effect, and suction and thermal radiation widen the range of the stretching/shrinking parameter for which solutions exist.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

A new similarity solution with stability analysis for the three-dimensional boundary layer of hybrid nanofluids

Najiyah Safwa Khashi'ie et al.

Summary: The study introduces a new class of similarity transformation for analyzing boundary layer flow of hybrid nanofluids. It finds that there is non-uniqueness of solutions for certain physical parameters, with dual solutions for permeable and impermeable cases. Stability analysis shows the first solution is more stable than the second. The findings present original insights that can benefit researchers in fluid dynamics.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

Approaches for modelling of industrial energy systems: correlation of heat transfer characteristics between magnetohydrodynamics hybrid nanofluids and performance analysis of industrial length-scale heat exchanger

S. Anitha et al.

Summary: Numerical analysis was conducted on the heat transfer performance of an industrial-length double-tube heat exchanger using hybrid nanofluid and an external magnetic field. Results showed that the presence of a magnetic field led to higher Nusselt numbers for CNT-Fe3O4/water hybrid nanofluid, resulting in improved thermal efficiency and performance index of the heat exchanger. Reynolds number had a significant impact on the effectiveness.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Simultaneous results for unsteady flow of MHD hybrid nanoliquid above a flat/slendering surface

Fazle Mabood et al.

Summary: This research focuses on the boundary layer analysis of two-dimensional unsteady hybrid nanofluid flow over a flat/slendering stretching surface incorporating thermal radiation and magnetohydrodynamic analysis. The study resolves the transformed nonlinear ordinary differential equations using the Runge-Kutta-Fehlberg technique, and discusses the influences of the flow regime on several thermofluidic parameters. The main finding is that increasing the magnetic field and nanoparticle volume fraction parameters decreases skin friction, while improvements in radiation and nanoparticle volume fraction lead to a significant increase in heat transfer rate.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

A meticulous intelligent approach to predict thermal conductivity ratio of hybrid nanofluids for heat transfer applications

Rashid Pourrajab et al.

Summary: This research accurately predicted the thermal conductivity of hybrid nanofluids using locally weighted linear regression, outperforming other models in terms of prediction accuracy. Sensitivity analysis identified volume fraction, temperature, and nanoparticle size as the most important factors influencing thermal conductivity.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Effects of half-sinusoidal nonuniform heating during MHD thermal convection in Cu-Al2O3/water hybrid nanofluid saturated with porous media

Nirmalendu Biswas et al.

Summary: This study aims to demonstrate a method for enhancing heat transfer through porous media using a hybrid nanofluid of Cu-Al2O3/water during magnetohydrodynamic flow. By heating a square cavity at the bottom with different frequencies of half-sinusoidal function, along with a uniform magnetic field, the study confirmed that hybrid nanofluid flow with multi-frequency spatial heating can improve thermal performance significantly.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Numerical evaluation of turbulence heat transfer and fluid flow of hybrid nanofluids in a pipe with innovative vortex generator

Seyed Soheil Mousavi Ajarostaghi et al.

Summary: The study evaluated the heat transfer performance of hybrid nanofluids in a pipe with a vortex generator, showing that using a vortex generator and hybrid nanofluids can increase heat transfer rate. The MWCNT-Fe3O4/water hybrid nanofluid demonstrated better thermal performance at all Reynolds numbers, with higher thermal performance growth rate at lower Reynolds numbers.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

MHD mixed convection of Al2O3-Cu-water hybrid nanofluid in a wavy channel with incorporated fixed cylinder

Shafqat Hussain et al.

Summary: This study conducted numerical simulations on the mixed convection of Al2O3-Cu-water hybrid nanofluid in a wavy channel, finding that Reynolds number is a key factor influencing fluid behavior. The highest average Nusselt number was achieved at A = 0.05, promoting heat transfer by roughly 200%.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Stability analysis of MHD hybrid nanofluid flow over a stretching/shrinking sheet with quadratic velocity

Nurul Amira Zainal et al.

Summary: The study demonstrates that increasing the nanoparticle volume fraction in the magnetohydrodynamic hybrid nanofluid can enhance wall shear stress and convective heat transfer rate. Moreover, non-uniqueness solutions and unique solutions are observed under specific conditions.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Theoretical analysis of new mass flux theory and Arrhenius activation energy in Carreau nanofluid with magnetic influence

M. Irfan et al.

Summary: In the realm of pharmaceuticals, nanotechnology, and nanoscience, scientists are exploring the concept of nanofluids, two-phase ingredients with notable heat transportation properties. This study delves into new concepts related to mass flux and activation energy in magnetized transient Carreau nanofluids with variable conductivity, investigating convective phenomena, heat sources/sinks, and chemical reactions. By using the bvp4c algorithm, the study graphically illustrates the results of influential parameters, showing that thermophoretic and activation energy parameters have similar effects on concentration distribution. Comparisons with outstanding agreement are also made.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Physics, Multidisciplinary

Arrhenius activation energy theory in radiative flow of Maxwell nanofluid

K. Rafiq et al.

Summary: The use of nanofluids can enhance heat transport in a structure, but different factors can have conflicting effects. Activation energy and chemical reactions impact the concentration field, while Brownian and thermophoretic factors can reduce the Nusselt number.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Thermodynamics

Heat transfer in steady slip flow of tangent hyperbolic fluid over the lubricated surface of a stretchable rotatory disk

Usman et al.

Summary: The study investigates the steady slip flow and heat transfer of tangent hyperbolic fluid over a lubricating surface of the stretchable rotatory disk, considering the effects of MHD, nonlinear radiation, and non-uniform heat source/sink subject to nonlinear boundary conditions. The results show that with enhanced slip at the interface and Weissenberg number, radial and azimuthal velocities increase near the disk, while the power-law index exhibits two different trends. Additionally, temperature rises with the radiation parameter, particularly prominently for nonlinear radiation.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Study of Brownian motion and thermophoretic diffusion on non-linear mixed convection flow of Carreau nanofluid subject to variable properties

M. Irfan

Summary: This study examines the rheological aspects of nanofluids and their potential applications in sustainable energy strategies. Through simulation analysis, it is found that nanofluids have exaggerated heat transport capacity and can serve as possible alternatives to conventional fluids. The research results indicate that the heat transfer performance of nanofluids varies under different variable conditions.

SURFACES AND INTERFACES (2021)

Add to Collection

Article Engineering, Chemical

Numerical simulation of squeezing flow Jeffrey nanofluid confined by two parallel disks with the help of chemical reaction: effects of activation energy and microorganisms

Yu-Ming Chu et al.

Summary: The utilization of nanofluids has shown beneficial contributions in various fields, and this study focuses on examining the heat transfer enhancement in non-Newtonian Jeffrey nanofluid with multiple thermal features and bioconvection characteristics. The system of differential equations is simplified to an ordinary one using a dimensionless vector, and numerically implemented for analysis of fluid flow effect from a physical perspective. The numerical findings are detailed and explored using tabular data to understand the modeled system.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2021)

Add to Collection

Article Physics, Applied

Assessment of bioconvection in magnetized Sutterby nanofluid configured by a rotating disk: A numerical approach

M. Ijaz Khan et al.

Summary: This study focuses on exploring the thermal properties of Sutterby nanofluid in bioconvection flow over rotating and stretchable disks. By observing the effects of various physical parameters, enhancements in velocity, temperature, concentration, and motile microorganism are noted. It is observed that axial and tangential velocity components decrease with Reynolds number and buoyancy ratio parameter, while nanofluid concentration improves with activation energy and concentration Biot number.

MODERN PHYSICS LETTERS B (2021)

Add to Collection

Article Engineering, Chemical

Stagnation-point flow of Ag-CuO/water hybrid nanofluids over a permeable stretching/shrinking sheet with temporal stability analysis

Ali Akbar Abbasian Arani et al.

Summary: This study investigates the stagnation-point flow of hybrid Ag-CuO/water nanofluids over a stretching/shrinking sheet. Through numerical and stability analysis, it is found that there are dual solutions to the problem, which are connected to the shrinking rate. The friction factor and Nusselt number of the nanofluids show significant variations with the suction/injection parameter.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Heat transfer, entropy generation, economic and environmental analyses of linear fresnel reflector using novel rGO-Co3O4 hybrid nanofluids

Zafar Said et al.

Summary: This study successfully enhanced the heat transfer performance of a small prototype linear Fresnel reflector by using rGO-Co3O4/water hybrid nanofluids, which resulted in increased thermal efficiency, improved exergy efficiency, and higher temperatures. Additionally, the nanofluids improved heat transfer coefficient, thermal conductivity, and other performance parameters, while reducing entropy generation and electrical energy consumption.

RENEWABLE ENERGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Slip velocity and temperature jump effects on molybdenum disulfide MoS2 and silicon oxide SiO2 hybrid nanofluid near irregular 3D surface

Mumtaz Khan et al.

Summary: Researchers have focused on hybrid nano materials to enhance thermal conductivity of fluids, highlighting their effectiveness in heat transfer compared to nanofluids. Incorporating hybrid nano particles in fluid mixtures results in higher heat transfer, surpassing simple nanofluids.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Effect of resistive heating on incessantly poignant thin needle in magnetohydrodynamic Sakiadis hybrid nanofluid

Iskander Tlili et al.

Summary: In this study, the flow and heat transfer of water-ethylene glycol based Ti-Cu hybrid nanofluid in magnetohydrodynamic Sakiadis flow were investigated numerically. The results showed differences in thermal boundary layer between the Blasius and Sakiadis flows, with higher energy transport rate observed in moving needle compared to fixed needle scenarios. Additionally, it was found that Ti-Cu/EG-water hybrid nanofluid exhibited higher heat transfer rate than water-EG/Ti nanofluid.

AIN SHAMS ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Thermophoretic particle deposition in time-dependent flow of hybrid nanofluid over rotating and vertically upward/ downward moving disk

R. J. Punith Gowda et al.

Summary: The research examined the deposition of thermophoretic particles in the flow of hybrid nanofluid fuelled by rotating disk motion. The study converted estimated PDE's to ODEs with similarity transformations, solved by a numerical process, revealing changes in velocity, concentration, thermal profiles, and particle deposition behavior under different parameters. The results show that the movement speed of the disk and thermophoretic coefficient affect the rate of mass transfer.

SURFACES AND INTERFACES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Thermally radioactive bioconvection flow of Carreau nanofluid with modified Cattaneo-Christov expressions and exponential space-based heat source

Umar Farooq et al.

Summary: The research explores a new approach for heat transfer and biomedicine/bioengineering using nanoparticles in base fluid. Numerical simulations were conducted to examine the heat/mass transportation of nanofluid and bioconvection characteristics under various thermal consequences. The study reveals the effects of different parameters on velocity, temperature distribution, concentration field, and microorganism profile in the nanofluid flow.

ALEXANDRIA ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

ASSESSMENT OF ENTROPY GENERATION AND HEAT TRANSFER IN THREE-DIMENSIONAL HYBRID NANOFLUIDS FLOW DUE TO CONVECTIVE SURFACE AND BASE FLUIDS

Himanshu Upreti et al.

Summary: This study investigates the entropy generation of hybrid nanofluids flow on a porous stretching surface under the influence of thermal radiation, viscous dissipation, and convective boundary conditions. The investigation reveals the patterns of velocities/temperature, Nusselt and Bejan numbers, and entropy generation in relation to various parameters, using the Xue model of thermal conductivity for nanofluids. The comparison of different hybrid nanofluids with thermal profiles shows that the CNT-engine oil hybrid nanofluid exhibits more significant behavior near the surface compared to other hybrid nanofluids.

JOURNAL OF POROUS MEDIA (2021)

Add to Collection

Article Thermodynamics

Theoretical investigation for convective heat transfer on Cu/water nanofluid and (SiO2-copper)/water hybrid nanofluid with MHD and nanoparticle shape effects comprising relaxation and contraction phenomenon

Naheeda Iftikhar et al.

Summary: This study investigates the magnetohydrodynamic flow of (Cu-SiO2)/water hybrid nanofluid with consideration of peristaltic motion, using theoretical equations to model flow in four different geometric shapes. The effects of nanoparticles on velocity, temperature distribution, and heat transfer are discussed, showing direct proportionality between nanoparticle conductivity and volume. Additionally, the impact of convective heat transfer parameter is found to be higher in (Cu-SiO2)/water hybrid nanofluid compared to Cu-water nanofluid.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Cu-Al2O3/H2O hybrid nanofluid flow past a porous stretching sheet due to temperatue-dependent viscosity and viscous dissipation

Bhumavarapu Venkateswarlu et al.

Summary: The research introduces hybrid nanofluids in the study of porous stretching sheet and radiative heating, with variables such as viscosity and viscous dissipation included. Mathematical modeling and computational methods were used to analyze parameters like flow heat measure and heat transfer coefficients. The results indicate that hybrid nanofluids exhibit unique characteristics in velocity profile and heat transfer compared to regular fluids and nanofluids.

HEAT TRANSFER (2021)

Add to Collection

Article Physics, Multidisciplinary

A theoretical analysis of steady three-dimensional flow and heat transfer of Power-Law nanofluid over a stretchable rotating disk filled with gyrotactic microorganisms

Usman et al.

Summary: The research investigates the steady three-dimensional flow and heat transfer of a power-law nanofluid in the presence of a magnetic field and thermal radiation over a stretchable rotating disk filled with gyrotactic microorganisms. The physically modeled partial differential equations are transformed into combined nonlinear ordinary differential equations for analysis. The study examines the influence of various parameters on velocity, temperature, nanoparticle concentration, and microorganism density, providing a comparison with existing literature and scrutinizing the effects.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Thermodynamics

Entropy generation analysis due to MHD natural convection flow in a cavity occupied with hybrid nanofluid and equipped with a conducting hollow cylinder

Tahar Tayebi et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Thermodynamics

3D mixed convection MHD flow of GO-MoS2 hybrid nanoparticles in H2O-(CH2OH)2 hybrid base fluid under the effect of H2 bond

S. S. Ghadikoiaei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Impact of different surfactants and ultrasonication time on the stability and thermophysical properties of hybrid nanofluids

Hong Wei Xian et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Experimental study of thermo-convection performance of hybrid nanofluids of Al2O3-MWCNT/water in a differentially heated square cavity

S. O. Giwa et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Magnetic field effects on forced convection flow of a hybrid nanofluid in a cylinder filled with porous media: a numerical study

Ehsan Aminian et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Multidisciplinary Sciences

A Numerical Exploration of Modified Second-Grade Nanofluid with Motile Microorganisms, Thermal Radiation, and Wu's Slip

Yurong Li et al.

SYMMETRY-BASEL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

MHD Effects on Ciliary-Induced Peristaltic Flow Coatings with Rheological Hybrid Nanofluid

M. Awais et al.

COATINGS (2020)

Add to Collection

Article Engineering, Chemical

MHD flow and heat transfer near stagnation point over a stretching/shrinking surface with partial slip and viscous dissipation: Hybrid nanofluid versus nanofluid

Emad H. Aly et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Influences of Hall current and radiation on MHD micropolar non-Newtonian hybrid nanofluid flow between two surfaces

Saeed Islam et al.

AIP ADVANCES (2020)

Add to Collection

Article Thermodynamics

Accurate prediction of thermal conductivity of ethylene glycol-based hybrid nanofluids using artificial intelligence techniques

Mehdi Jamei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Mathematics, Applied

Numerical investigation of Ag-CuO/water hybrid nanofluid flow past a moving oscillating cylinder with heat transfer

Vemula Rajesh et al.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2020)

Add to Collection

Article Physics, Multidisciplinary

Convective MHD flow of hybrid-nanofluid within an elliptic porous enclosure

S. A. Shehzad et al.

PHYSICS LETTERS A (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Heat transfer of a hybrid nanofluid past a circular cylinder in the presence of thermal radiation and viscous dissipation

Nepal Chandra Roy et al.

AIP ADVANCES (2020)

Add to Collection

Article Thermodynamics

Investigation of different base fluids suspend by CNTs hybrid nanoparticle over a vertical circular cylinder with sinusoidal radius

M. Gholinia et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Numerical investigation for rotating flow of MHD hybrid nanofluid with thermal radiation over a stretching sheet

Muhammad Shoaib et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Thermodynamics

3D MHD cross flow over an exponential stretching porous surface

Manoj Kumar Nayak et al.

HEAT TRANSFER (2020)

Add to Collection

Article Multidisciplinary Sciences

Ohmic Heating and Non-uniform Heat Source/Sink Roles on 3D Darcy-Forchheimer Flow of CNTs Nanofluids Over a Stretching Surface

Himanshu Upreti et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Adverse effects of a hybrid nanofluid in a wavy non-uniform annulus with convective boundary conditions

Hina Sadaf et al.

RSC ADVANCES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MHD Hybrid Cu-Al2O3/Water Nanofluid Flow with Thermal Radiation and Partial Slip Past a Permeable Stretching Surface: Analytical Solution

Nur Syahirah Wahid et al.

JOURNAL OF NANO RESEARCH (2020)

Add to Collection

Article Thermodynamics

VELOCITY, THERMAL AND CONCENTRATION SLIP EFFECTS ON MHD SILVER-WATER NANOFLUID FLOW PAST A PERMEABLE CONE WITH SUCTION/INJECTION AND VISCOUS-OHMIC DISSIPATION

Ashish Mishra et al.

HEAT TRANSFER RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Terrific effect of H2 on 3D free convection MHD flow of C2H6O2-H2O hybrid base fluid to dissolve Cu nanoparticles in a porous space considering the thermal radiation and nanoparticle shapes effects

S. S. Ghadikolaei et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Engineering, Chemical

Natural convection MHD flow due to MoS2-Ag nanoparticles suspended in C2H6O2-H2O hybrid base fluid with thermal radiation

S. S. Ghadikolaei et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)

Add to Collection

Article Physics, Multidisciplinary

Unsteady MHD flow and heat transfer of fractional Maxwell viscoelastic nanofluid with Cattaneo heat flux and different particle shapes

Ming Shen et al.

CHINESE JOURNAL OF PHYSICS (2018)

Add to Collection

Article Thermodynamics

Shape effects of MoS2 nanoparticles on rotating flow of nanofluid along a stretching surface with variable thermal conductivity: A Galerkin approach

Muhammad Hamid et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

On Model for Three-Dimensional Flow of Nanofluid With Heat and Mass Flux Boundary Conditions

Tasawar Hayat et al.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Convection heat transfer in micropolar nanofluids with oxide nanoparticles in water, kerosene and engine oil

Abid Hussanan et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Physics, Multidisciplinary

Three-dimensional flow of nanofluid with heat and mass flux boundary conditions

Tasawar Hayat et al.

CHINESE JOURNAL OF PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Heat transfer in MHD stagnation point flow of a ferrofluid over a stretchable rotating disk

Irfan Mustafa et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.