4.7 Article

Twinning characteristics in rolled AZ31B magnesium alloy under three stress states

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

Evaluation of elastic-viscoplastic self-consistent models for a rolled AZ31B magnesium alloy under monotonic loading along five different material orientations and free-end torsion

Xianyun Zhu et al.

Summary: Comprehensive experiments were conducted on a rolled AZ31B Mg thick plate and a tubular specimen to evaluate the elastic-viscoplastic self-consistent model with twinning and detwinning (EVPSC-TDT) on magnesium alloys. The model accurately predicted stress-strain curves, hardening rates, textures after fracture, and tension twin evolutions for different loading conditions. The experiment also observed the Swift effect, which was properly simulated by the model.

JOURNAL OF MAGNESIUM AND ALLOYS (2023)

Article Nanoscience & Nanotechnology

Twinning in rolled AZ31B magnesium alloy under free-end torsion

Luiz Carneiro et al.

Summary: The study experimentally characterized the mechanical response and microstructure evolution of a rolled AZ31B magnesium alloy using companion thin-walled tubular specimens under free-end monotonic torsion. It was found that the shear stress-shear strain response exhibits a sigmodal shape with four distinctive stages of strain hardening, involving basal slips, tension twinning, and compressing twinning. The formation of twin-twin boundaries (TTBs) and the collective hardening effects by twin boundary (TB) and TTB contribute to a unique rise in strain hardening rate in certain stages. Further observations of different types of twins and their interactions provide insights into the deformation mechanisms during different stages of the process.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Materials Science, Multidisciplinary

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

Nicolo M. Della Ventura et al.

Summary: The study of extension twinning mechanism in magnesium at the micron scale revealed that basal slip triggers {10(1) over bar2} twin nucleation and favors twin growth, while pyramidal slip leads to limited {10(1) over bar2} twin growth. The critical resolved shear stress for {10(1) over bar2} twinning was found to be ten times higher than in bulk material, indicating higher ductility in the tested samples.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

On the intrusion-like co-zone twin-twin structure: An in situ observation

Duke Culbertson et al.

Summary: In this study, a single-crystal magnesium specimen was subjected to monotonic tension along the c-axis, revealing a intrusion-like twin-twin structure at the micron scale for the first time. The in situ observation showed that the structure is formed by multiple twin-twin boundaries (TTBs) and incoherent twin boundaries (I-CTBs) following energetically favorable formation sequences.

MATERIALS LETTERS (2021)

Article Engineering, Mechanical

Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach

Sudeep K. Sahoo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Article Materials Science, Multidisciplinary

Evolution of dislocation and twin densities in a Mg alloy at quasi-static and high strain rates

M. Wang et al.

ACTA MATERIALIA (2020)

Article Engineering, Mechanical

Multiaxial cyclic behaviour of extruded and forged AZ80 Mg alloy

A. Gryguc et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Materials Science, Multidisciplinary

Secondary twin variant selection in four types of double twins in titanium

Shun Xu et al.

ACTA MATERIALIA (2018)

Article Nanoscience & Nanotechnology

Effects of free-end torsion on the microstructure evolution and fatigue properties in an extruded AZ31 rod

Jiaqi Hu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Materials Science, Multidisciplinary

Structural characteristics of {(1)over-bar012} non-cozone twin-twin interactions in magnesium

Mingyu Gong et al.

ACTA MATERIALIA (2018)

Article Materials Science, Multidisciplinary

In situ observation of cross-grain twin pair formation in pure magnesium

Duke Culbertson et al.

PHILOSOPHICAL MAGAZINE LETTERS (2018)

Article Engineering, Mechanical

Multiaxial cyclic behaviour and fatigue modelling of AM30 Mg alloy extrusion

Ali A. Roostaei et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Article Chemistry, Physical

Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion

Seyed Alireza Torbati-Sarraf et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Nanoscience & Nanotechnology

Twin-induced hardening in extruded Mg alloy AM30

Hua Qiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Article Materials Science, Multidisciplinary

On the rapid hardening and exhaustion of twinning in magnesium alloy

P. D. Wu et al.

ACTA MATERIALIA (2017)

Article Engineering, Mechanical

Dislocation transmutation by tension twinning in magnesium alloy AZ31

Fulin Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Article Nanoscience & Nanotechnology

Localized deformation via multiple twinning in a Mg-Gd-Y-Zr alloy processed by high-pressure torsion

Lingling Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Nanoscience & Nanotechnology

Strengthening and toughening of extruded magnesium alloy rods by combining pre-torsion deformation with subsequent annealing

Bo Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Deformation twinning in hexagonal materials

Xiaozhou Liao et al.

MRS BULLETIN (2016)

Article Materials Science, Multidisciplinary

Sequential double extension twinning in a magnesium alloy: Combined statistical and micromechanical analyses

Zhang-Zhi Shi et al.

ACTA MATERIALIA (2015)

Article Metallurgy & Metallurgical Engineering

Enhanced ductility and reduced asymmetry of Mg-2Al-1Zn alloy plate processed by torsion and annealing

Jun Wang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Article Materials Science, Multidisciplinary

Improving tensile and compressive properties of magnesium alloy rods via a simple pre-torsion deformation

Ning Guo et al.

MATERIALS & DESIGN (2015)

Article Materials Science, Multidisciplinary

Twin-twin interactions in magnesium

Qin Yu et al.

ACTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Variant selection during secondary and tertiary twinning in pure titanium

Hong Qin et al.

ACTA MATERIALIA (2014)

Article Materials Science, Multidisciplinary

Co-zone {(1)over-bar012} Twin Interaction in Magnesium Single Crystal

Qin Yu et al.

MATERIALS RESEARCH LETTERS (2014)

Article Materials Science, Multidisciplinary

The effect of twin-twin interactions on the nucleation and propagation of {10(1)over-bar2} twinning in magnesium

Haitham El Kadiri et al.

ACTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Evolution of texture and microstructure during hot torsion of a magnesium alloy

Somjeet Biswas et al.

ACTA MATERIALIA (2013)

Article Engineering, Mechanical

A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms

H. Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Article Nanoscience & Nanotechnology

Improved ductility of magnesium alloys by a simple shear process followed by annealing

Hua Zhang et al.

SCRIPTA MATERIALIA (2013)

Article Nanoscience & Nanotechnology

On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion

X. Q. Guo et al.

SCRIPTA MATERIALIA (2013)

Article Materials Science, Multidisciplinary

Variant selection of primary, secondary and tertiary twins in a deformed Mg alloy

Sijia Mu et al.

ACTA MATERIALIA (2012)

Article Nanoscience & Nanotechnology

A constitutive model of twinning and detwinning for hexagonal close packed polycrystals

H. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Nanoscience & Nanotechnology

[0001] Compression response at room temperature of single-crystal magnesium

B. Syed et al.

SCRIPTA MATERIALIA (2012)

Article Nanoscience & Nanotechnology

Evolution of microstructure and texture during planar simple shear of magnesium alloy

Jun-Yun Kang et al.

SCRIPTA MATERIALIA (2012)

Article Mechanics

ON THE LARGE STRAIN TORSION OF HCP POLYCRYSTALS

P. D. Wu et al.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2012)

Article Materials Science, Multidisciplinary

{10(1)over-bar2}-{10(1)over-bar} Double twinning in magnesium

Ales Jaeger et al.

PHILOSOPHICAL MAGAZINE LETTERS (2011)

Article Materials Science, Multidisciplinary

Deformation twinning in AZ31: Influence on strain hardening and texture evolution

Marko Knezevic et al.

ACTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

Variant selection during secondary twinning in Mg-3%Al

E. Martin et al.

ACTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

Role of {10-12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy

Seong-Gu Hong et al.

ACTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials

H. Wang et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)

Article Materials Science, Multidisciplinary

A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects

H. El Kadiri et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)

Article Nanoscience & Nanotechnology

Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy

Sung Hyuk Park et al.

SCRIPTA MATERIALIA (2010)

Article Engineering, Mechanical

Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31

Gwenaelle Proust et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2009)

Article Engineering, Mechanical

Texture and Mechanical Behavior of Magnesium During Free-End Torsion

Benoit Beausir et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2009)

Review Materials Science, Multidisciplinary

Texture evolution in equal-channel angular extrusion

Irene J. Beyerlein et al.

PROGRESS IN MATERIALS SCIENCE (2009)

Article Materials Science, Multidisciplinary

Analysis of texture evolution in magnesium during equal channel angular extrusion

Benoit Beausir et al.

ACTA MATERIALIA (2008)

Article Materials Science, Multidisciplinary

Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy

M. R. Barnett et al.

ACTA MATERIALIA (2008)

Article Materials Science, Multidisciplinary

Reorientation and stress relaxation due to twinning:: Modeling and experimental characterization for Mg

B. Clausen et al.

ACTA MATERIALIA (2008)

Article Materials Science, Multidisciplinary

Strain hardening due to {10(1)over-bar2} twinning in pure magnesium

C. H. Caceres et al.

PHILOSOPHICAL MAGAZINE (2008)

Article Nanoscience & Nanotechnology

Twinning and the ductility of magnesium alloys Part I: Tension twins

M. R. Barnett

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

Twinning and texture development in two Mg alloys subjected to loading along three different strain paths

L. Jiang et al.

ACTA MATERIALIA (2007)

Article Nanoscience & Nanotechnology

Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy

Lan Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy

Y. N. Wang et al.

ACTA MATERIALIA (2007)

Article Engineering, Mechanical

Hardening evolution of AZ31B Mg sheet

X. Y. Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2007)

Article Nanoscience & Nanotechnology

Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes

S. Godet et al.

SCRIPTA MATERIALIA (2006)

Article Nanoscience & Nanotechnology

Twinning-induced softening in polycrystalline AM30 Mg alloy at moderate temperatures

L Jiang et al.

SCRIPTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature

J Koike

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)

Article Materials Science, Multidisciplinary

Twins as barriers to basal slip in hexagonal-close-packed metals

A Serra et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Article Nanoscience & Nanotechnology

Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation

A Yamashita et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)