4.7 Article

Revisiting the pinning sites in 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Related references

Note: Only part of the references are listed.
Article Chemistry, Applied

Effects of copper and zirconium contents on microstructure and magnetic properties of Sm(Co,Fe,Cu,Zr)z magnets with high iron content

Zhifeng Shang et al.

Summary: The coercivity of Sm(Co,Fe,Cu,Zr)z magnets is sensitive to Zr content, with excessive Zr leading to Cu and Fe distribution heterogeneity. A high Cu content destroys the cell boundary phase and enlarges the cell size, resulting in decreased magnetic properties.

JOURNAL OF RARE EARTHS (2021)

Review Materials Science, Multidisciplinary

Overview of composition and technique process study on 2:17-type Sm-Co high-temperature permanent magnet

Chao Wang et al.

Summary: Sm-Co permanent magnets are widely used due to their excellent magnetic properties at high temperatures, with the capability to reliably operate at temperatures up to 500 degrees C being their biggest advantage. However, achieving reliable high-temperature magnetic properties depends greatly on alloy composition and technique processes. This review emphasizes the importance of appropriate composition and technique processes for good high-temperature magnetic properties in Sm-Co magnets.

RARE METALS (2021)

Article Materials Science, Multidisciplinary

Atomic scale understanding of the defects process in concurrent recrystallization and precipitation of Sm-Co-Fe-Cu-Zr alloys

Xin Song et al.

Summary: The study investigated the process of concurrent recrystallization and precipitation in a supersaturated hexagonal Sm(Co, Fe, Cu, Zr)(7.5) alloy using transmission electron microscopy. It found that the formation and dissociation of defects play a crucial role in the transformation of the matrix and formation of precipitates. The growth velocities of recrystallized cells and precipitates are closely related to defects density, with faster growth at early stages and slower growth at later stages.

ACTA MATERIALIA (2021)

Article Chemistry, Physical

Grain boundary effect on the microstructure of solution-treated Fe-rich Sm-Co-Fe-Cu-Zr alloys

Munzali Musa et al.

Summary: Grain boundaries with sparse 1:5H precipitates are considered as the primary demagnetization sites in pinning-controlled 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets, leading to poor magnetic properties. TEM investigations reveal that grain boundary regions contain larger 2:17R nanovariants, less SFs, and fewer defects-aggregated cell boundaries compared to grain interiors, indicating that early decomposition preferably occurs at grain boundaries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Role of nanoscale interfacial defects on magnetic properties of the 2:17-type Sm-Co permanent magnets

Xin Song et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Defects-aggregated cell boundaries induced domain wall curvature change in Fe-rich Sm-Co-Fe-Cu-Zr permanent magnets

Wentao Jia et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

Identifications of SmCo5 and Smn+1Co5n-1-type phases in 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Xianglong Zhou et al.

SCRIPTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Role of primary Zr-rich particles on microstructure and magnetic properties of 2:17-type Sm-Co-Fe-Cu-Zr permanent magnets

Tao Yuan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Metallurgy & Metallurgical Engineering

Fe content influence on the microstructure of solution-treated Sm-Co-Fe-Cu-Zr alloys

Munzali Musa et al.

INTERMETALLICS (2020)

Article Materials Science, Multidisciplinary

Nanoscale short-range ordering induced cellular structure and microchemistry evolution in Sm2Co17-type magnets

Haichen Wu et al.

ACTA MATERIALIA (2020)

Article Chemistry, Multidisciplinary

Initial Irreversible Losses and Enhanced High-Temperature Performance of Rare-Earth Permanent Magnets

Wei Xia et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Applied

Coercivity kinetics upon step annealing of sintered Sm(Co0.88-xFexCu0.09Zr0.03)7 magnets

A. G. Popov et al.

JOURNAL OF RARE EARTHS (2019)

Article Materials Science, Multidisciplinary

Effect of grain boundary on magnetization behaviors in 2:17 type SmCo magnet

Guanghui Yan et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Article Materials Science, Multidisciplinary

Attractive-domain-wall-pinning controlled Sm-Co magnets overcome the coercivity-remanence trade-off

Hansheng Chen et al.

ACTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Crystalline and magnetic microstructures of iron-rich Sm (Co0.65Fe0.26Cu0.07Zr0.02)(7.8) sintered magnets: Isothermal aging effect

Kuikui Song et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Article Engineering, Electrical & Electronic

Microstructural Analysis During the Step-Cooling Annealing of Iron-Rich Sm(Co0.65Fe0.26Cu0.07Zr0.02)7.8 Anisotropic Sintered Magnets

Kuikui Song et al.

IEEE TRANSACTIONS ON MAGNETICS (2017)

Article Multidisciplinary Sciences

Atomic structure and domain wall pinning in samarium-cobalt-based permanent magnets

M. Duerrschnabel et al.

NATURE COMMUNICATIONS (2017)

Article Engineering, Electrical & Electronic

In Situ Observation of Domain Wall Pinning in Sm(Co,Fe,Cu,Zr)z Magnet by Lorentz Microscopy

Yue Tian et al.

IEEE TRANSACTIONS ON MAGNETICS (2015)

Article Materials Science, Multidisciplinary

Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17-type permanent magnets

O Gutfleisch et al.

ACTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

The microstructure of sintered Sm(Co0.72Fe0.20Cu0.055Zr0.025)7.5 permanent magnet studied by atom probe

XY Xiong et al.

ACTA MATERIALIA (2004)

Article Engineering, Electrical & Electronic

Magnetic domain structure in SmCo 2: 17 permanent magnets

Y Zhang et al.

IEEE TRANSACTIONS ON MAGNETICS (2003)

Article Engineering, Electrical & Electronic

Evolution of microstructure, microchemistry and coercivity in 2:17 type Sm-Co magnets with heat treatment

Y Zhang et al.

IEEE TRANSACTIONS ON MAGNETICS (2001)