Gas separation performance of copolymers of perfluoro(butenyl vinyl ether) and perfluoro(2,2-dimethyl-1,3-dioxole)

Amorphous glassy perfluorinated polymers have high gas permeability, are chemically inert, thermally stable and known for their superior separation performance for several gas pairs. In the current study, the gas separation performance of copolymers of perfluoro(butenyl vinyl ether) (PBVE) and perfluoro(2,2-dimethyl-1,3-dioxole) (PDD) with two different monomer ratios, commercially known as CyclAFlor (TM), was studied for the first time, both at 35 degrees C and at higher temperatures below their glass transition temperature. For comparison, the temperature dependence of Cytop (R) (a homopolymer of PBVE) was studied. The higher the mole percentage of PBVE, the lower gas permeability and the higher selectivity for all gas pairs of interest. All permeability coefficients in Cytop (R) were lower than those reported in the literature except for helium and hydrogen due to the annealing protocol used, enhancing He/gas and H-2/gas selectivity. The poly(PBVE-co-PDD) copolymers exhibited separation performance in the vicinity of the Robeson 2008 upper bound for many gas pairs, including He/H-2, He/CH4, He/N-2 and N-2/CH4. In particular, poly(50%PBVE-co-50%PDD) was more permeable than Hyflon (R) AD 60 but more selective for most gas pairs of interest. Both copolymers showed increasing H-2/CO2 selectivity with temperature. While permeability was stable with pressure up to 10 bar at 35 degrees C, a change in the activation energy of permeation of CO2 at higher temperatures suggested that changes to the polymer structure had occurred, possibly reducing the glass transition temperature. Mixed gas measurements confirmed the suitability of CyclAFlorTM copolymers for CO2/CH4 separation compared to Cytop (R).

Automated summary

Amorphous glassy perfluorinated polymers possess high gas permeability, chemical inertness, thermal stability, and superior separation performance, particularly when copolymerized with perfluoro(butenyl vinyl ether) (PBVE) and perfluoro(2,2-dimethyl-1,3-dioxole) (PDD) at different ratios. Higher PBVE content results in lower gas permeability and higher selectivity. The copolymers show promising separation performance at high temperatures and exhibit increased H-2/CO2 selectivity with temperature.