4.7 Article

Robust diagnosis with high protection to gas turbine failures identification based on a fuzzy neuro inference monitoring approach

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Waste heat recovery in an intercooled gas turbine system: Exergo-economic analysis, triple objective optimization, and optimum state selection

Farayi Musharavati et al.

Summary: The development of an intercooled gas turbine system aims to improve thermal efficiency, economic performance, and environmental sustainability. Comprehensive analysis of energy, exergy, and exergo-economics shows the potential for increased efficiency in the new system. A triple objective optimization was conducted to determine the best system configuration based on thermodynamic and exergo-economic criteria. The final optimal state of the system was selected using the Technique for Order of Preference by Similarity to Ideal Solution.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Industrial

A joint classification-regression method for multi-stage remaining useful life prediction

Ji-Yan Wu et al.

Summary: This study proposes a joint classification-regression scheme for multi-stage RUL prediction, which classifies system health stages based on real-time sensory data and trained models, and performs stage-level RUL prediction with regression algorithms. Experimental results show that the proposed method achieves approximately 6.5% accuracy improvement over state-of-the-art algorithms in RUL prediction.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Article Computer Science, Interdisciplinary Applications

Gas turbine monitoring using neural network dynamic nonlinear autoregressive with external exogenous input modelling

Mohamed Ben Rahmoune et al.

Summary: The main purpose of this study is to propose a tool for protection and safety measures against instability in a gas turbine through dynamic behavior modeling, using an artificial neural network supervision system for efficient diagnostic strategy. This approach allows for vibration monitoring, dynamic stability assurance, and effective detection and management of failures caused by intrinsic vibrations. Additionally, the use of artificial neural networks proves to be highly effective in modeling complex dynamic systems.

MATHEMATICS AND COMPUTERS IN SIMULATION (2021)

Article Engineering, Mechanical

Nonlinear study on a rigid rotor supported by herringbone grooved gas bearings: Theory and validation

Wanhui Liu et al.

Summary: This study investigates the nonlinear behavior of a rigid rotor supported by herringbone grooved journal gas bearings (HGJBs) using the two-dimensional narrow groove theory (2D-NGT). The theoretical model is successfully validated by experimental data in predicting the onset speed of sub-synchronous vibration and whirl frequency ratio of the HGJB-rotor system, showing the stability changes under different static load conditions.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Thermodynamics

Vector-based deterioration index for gas turbine gas-path prognostics modeling framework

Mehrdad Kiaee et al.

Summary: The study introduces a conceptual modeling framework for gas path prognostics of gas turbines to improve condition monitoring knowledge, incorporating main concepts, potential fault modes, and a new vector-based deterioration index. The framework, derived from experimental data, has been partially implemented for a 100 kW micro gas turbine.

ENERGY (2021)

Article Automation & Control Systems

Improved Remaining Useful Life Estimation of Wind Turbine Drivetrain Bearings Under Varying Operating Conditions

Milad Rezamand et al.

Summary: A hybrid prognostic method using SCADA and vibration signals is introduced to predict the remaining useful life of wind turbine bearings. Experimental data validation shows higher RUL accuracy compared to the Bayesian algorithm.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

Article Engineering, Mechanical

Fault diagnosis of gas turbines with thermodynamic analysis restraining the interference of boundary conditions based on STN

Dengji Zhou et al.

Summary: A novel fault diagnostic method based on spatial transformer network (STN) is proposed to improve the accuracy of gas turbine fault detection. By combining with typical small deviation (SD) theory and a classification network, the gas path analyses are successfully completed, improving the diagnostic accuracy.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Review Engineering, Mechanical

A comprehensive review on blade tip timing-based health monitoring: status and future

Zhongsheng Chen et al.

Summary: The paper highlights the importance and challenges of blade tiptiming (BTT) technique as a method for blade vibration monitoring. It outlines the three main challenges faced by BTT technology, comprehensively reviews the developments of BTT probes, signal preprocessing, and vibration monitoring, and discusses future trends.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Review Engineering, Mechanical

Online oil debris monitoring of rotating machinery: A detailed review of more than three decades

Jiayi Sun et al.

Summary: This paper provides a detailed survey and classification of the advances in oil debris monitoring for online health monitoring of rotating machinery. It systematically analyzes the detection mechanisms of various sensing technologies, reviews real applications, and points out future works required to address the challenges faced by online monitoring of rotating machinery. Some of these sensing technologies have already been commercialized, indicating their practicality beyond research activities.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Industrial

Assessment of steam turbine blade failure and damage mechanisms using a Bayesian network

David A. Quintanar-Gago et al.

Summary: The paper introduces a Bayesian network model to handle interactions among common damage mechanisms and failure modes in nuclear steam turbine rotating blades. This model helps predict which portions of the turbine will need repair and utilizes a unique quantification method combining expert judgement, Recursive Noisy OR, and damage mechanism susceptibility ranking. It is adaptable to different turbine designs and purposes, with detailed development, validation, and examples of application presented.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

Article Thermodynamics

Anomaly detection of gas turbines based on normal pattern extraction

Mingliang Bai et al.

APPLIED THERMAL ENGINEERING (2020)

Article Computer Science, Interdisciplinary Applications

A novel gas turbine fault detection and identification strategy based on hybrid dimensionality reduction and uncertain rule-based fuzzy logic

Shabnam Yazdani et al.

COMPUTERS IN INDUSTRY (2020)

Article Engineering, Mechanical

A gas path fault diagnostic model of gas turbines based on changes of blade profiles

Dengji Zhou et al.

ENGINEERING FAILURE ANALYSIS (2020)

Review Computer Science, Artificial Intelligence

Neural network applications in fault diagnosis and detection: an overview of implementations in engineering-related systems

Ahmad Azharuddin Azhari Mohd Amiruddin et al.

NEURAL COMPUTING & APPLICATIONS (2020)

Article Automation & Control Systems

An Integrated Feature-Based Failure Prognosis Method for Wind Turbine Bearings

Milad Rezamand et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)

Article Engineering, Multidisciplinary

Combined effect of inlet air cooling and fouling on performance of variable geometry industrial gas turbines

Muhammad Baqir Hashmi et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

Article Engineering, Industrial

Towards multi-model approaches to predictive maintenance: A systematic literature survey on diagnostics and prognostics

Juan Jose Montero Jimenez et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Article Engineering, Mechanical

Thermal failure of a second rotor stage in heavy duty gas turbine

Daniel Slawinski et al.

ENGINEERING FAILURE ANALYSIS (2020)

Article Computer Science, Artificial Intelligence

Hybrid multi-mode machine learning-based fault diagnosis strategies with application to aircraft gas turbine engines

Yanyan Shen et al.

NEURAL NETWORKS (2020)

Article Computer Science, Information Systems

A New Hybrid Fault Prognosis Method for MFS Systems Based on Distributed Neural Networks and Recursive Bayesian Algorithm

Mojtaba Kordestani et al.

IEEE SYSTEMS JOURNAL (2020)

Article Engineering, Industrial

Fault detection based on one-class deep learning for manufacturing applications limited to an imbalanced database

Jeongsu Lee et al.

JOURNAL OF MANUFACTURING SYSTEMS (2020)

Article Computer Science, Artificial Intelligence

Application of interval type-2 fuzzy logic systems to gas turbine fault diagnosis

Morteza Montazeri-Gh et al.

APPLIED SOFT COMPUTING (2020)

Article Engineering, Mechanical

Failure analysis of gas turbine burner tips

S. S. Pelaseyed et al.

ENGINEERING FAILURE ANALYSIS (2019)

Article Engineering, Multidisciplinary

A novel gas turbine fault diagnosis method based on transfer learning with CNN

Shi-sheng Zhong et al.

MEASUREMENT (2019)

Article Computer Science, Artificial Intelligence

Active fault tolerant control based on a neuro fuzzy inference system applied to a two shafts gas turbine

Nadji Hadroug et al.

APPLIED ARTIFICIAL INTELLIGENCE (2018)

Article Automation & Control Systems

Sensor fault detection and isolation of an industrial gas turbine using partial adaptive KPCA

Mania Navi et al.

JOURNAL OF PROCESS CONTROL (2018)

Article Green & Sustainable Science & Technology

Photovoltaic system failure diagnosis based on adaptive neuro fuzzy inference approach: South Algeria solar power plant

Imad Eddine Kaid et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Review Energy & Fuels

Computational monitoring in real time: review of methods and applications

Arcady V. Dyskin et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2018)

Article Engineering, Multidisciplinary

Nonlinear Model-Based Process Operation under Uncertainty Using Exact Parametric Programming

Vassilis M. Charitopoulos et al.

ENGINEERING (2017)

Article Engineering, Multidisciplinary

Exploration of reliability algorithms using modified Weibull distribution: application on gas turbine

Ahmed Zohair Djeddi et al.

INTERNATIONAL JOURNAL OF SYSTEM ASSURANCE ENGINEERING AND MANAGEMENT (2017)

Article Computer Science, Artificial Intelligence

Dynamic neural networks for gas turbine engine degradation prediction, health monitoring and prognosis

S. Kiakojoori et al.

NEURAL COMPUTING & APPLICATIONS (2016)

Article Computer Science, Artificial Intelligence

Gas Turbine Modeling Based on Fuzzy Clustering Algorithm Using Experimental Data

Abdelhafid Benyounes et al.

APPLIED ARTIFICIAL INTELLIGENCE (2016)

Article Automation & Control Systems

Pattern recognition in multivariate time series - A case study applied to fault detection in a gas turbine

Cristiano Hora Fontes et al.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2016)

Article Engineering, Aerospace

A fuzzy-based gas turbine fault detection and identification system for full and part-load performance deterioration

Ehsan Mohammadi et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2015)

Article Automation & Control Systems

Adaptive sliding mode observer for sensor fault diagnosis of an industrial gas turbine

Sandy Rahme et al.

CONTROL ENGINEERING PRACTICE (2015)

Article Acoustics

Vibrations supervision in gas turbine based on parity space approach to increasing efficiency

Ahmed Hafaifa et al.

JOURNAL OF VIBRATION AND CONTROL (2015)

Article Computer Science, Artificial Intelligence

Real-time fault diagnosis for gas turbine generator systems using extreme learning machine

Pak Kin Wong et al.

NEUROCOMPUTING (2014)

Article Computer Science, Theory & Methods

Fault tolerant measurement system based on Takagi-Sugeno fuzzy models for a gas turbine in a combined cycle power plant

Rodrigo Berrios et al.

FUZZY SETS AND SYSTEMS (2011)

Article Automation & Control Systems

A Neuro-Fuzzy Online Fault Detection and Diagnosis Algorithm for Nonlinear and Dynamic Systems

Mohsen Shabanian et al.

INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2011)

Article Mathematics, Applied

Robust Fuzzy Fault Detection and Isolation Approach Applied to Surge in Centrifugal Compressor Modeling and Control

Ahmed Hafaifa et al.

FUZZY INFORMATION AND ENGINEERING (2010)

Article Computer Science, Artificial Intelligence

Model-based fault detection and isolation of a steam generator using neuro-fuzzy networks

Roozbeh Razavi-Far et al.

NEUROCOMPUTING (2009)

Article Engineering, Mechanical

Fault diagnosis of rotating machinery based on multiple ANFIS combination with GAS

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)