4.7 Article

Green hydrogen from microalgal liquefaction byproducts with ammonia recovery and effluent recycle for developing circular processes

Journal

JOURNAL OF CLEANER PRODUCTION
Volume 299, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.jclepro.2021.126834

Keywords

Microbial electrolysis; Algae biofuels; Hydrothermal liquefaction; Wastewater treatment; Proton transfer tracking

Funding

  1. Laboratory Directed Research and Development Program of Oak Ridge National Laboratory (ORNL)
  2. U.S. Department of Energy [DE AC05-00OR22725]
  3. ORNL
  4. Bredesen Center at the University of Tennessee
  5. Institute for Secure and Sustainable Environment at the University of Tennessee

Ask authors/readers for more resources

Hydrothermal liquefaction is a promising technology for microalgae-based biofuel production, but its aqueous wastes containing toxic ammoniacal nitrogen have little established reuse. The use of microbial electrolysis cells to valorize this waste has shown efficient removal of organic compounds and ammoniacal nitrogen for hydrogen production. The effluent from microbial electrolysis cells can be reused to grow the same microalgal strains, creating a circular biofuel production system with potential for further development.
Hydrothermal liquefaction is a promising technology for microalgae-based biofuel production. However, hydrothermal liquefaction's aqueous wastes have little established reuse, and contain significant fractions of toxic ammoniacal nitrogen. Careful reuse of this waste can assure microalgae-based biofuels are produced with less environmental impact and larger energy efficiency. Microbial electrolysis cells were investigated to valorize this waste product by converting the leftover organics into hydrogen and remove ammonia. Waste hydrothermal liquefaction aqueous phase from two microalgal strains, Tetraselmis sp. and Chlorella sp. were used as feedstocks for hydrogen production in microbial electrolysis cells. Chlorella and Tetraselmis aqueous phase-fed microbial electrolysis cells reach an average current density of 5.1 +/- 0.19 A/m(2) and 3.8 +/- 0.08 A/m(2). Compound removal rates and mass removal percentages were also investigated for each feedstock. Acetic acid, propionic acid, ethanol, and glycerol were effectively removed from the aqueous byproduct. Further, microbial electrolysis cells separated up to 34.3% of ammoniacal nitrogen present in the aqueous phase. Charge transfer analysis indicated that proton transfer, not ammonium transfer, contributed to the majority of the hydrogen production in the cathode. Finally, the microbial electrolysis cell effluent was reused to grow the same microalgal strains, leading to the development of a circular biofuel production system. Microalgae regrowth studies using microbial electrolysis cell effluent showed nearly complete removal of total organic carbon, but significantly less removal of total nitrogen. Tetraselmis sp. growth occurred with the Tetraselmis-derived MEC effluent, however, the control medium without effluent produced the most growth. These findings support the possibility of a circular biofuel framework using MECs, but additional constraints, including the removal of inorganic contaminants, are necessary to realize the circular processes. (C) 2021 Elsevier Ltd. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available