Related references
Note: Only part of the references are listed.Use of CO2 curing to enhance the properties of cold bonded lightweight aggregates (CBLAs) produced with concrete slurry waste (CSW) and fine incineration bottom ash (IBA)
Pei Tang et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Development of leak-free phase change material aggregates
Sarra Drissi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Production of artificial aggregates from steel-making slag: Influences of accelerated carbonation during granulation and/or post-curing
Yi Jiang et al.
JOURNAL OF CO2 UTILIZATION (2020)
Utilising CO2 technologies for recycled aggregate concrete: A critical review
Vivian W. Y. Tam et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The utilization of recycled aggregate in high performance concrete: a review
Bassam A. Tayeh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
An overview on the efficiency of different pretreatment techniques for recycled concrete aggregate
Kai Ouyang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Strength enhancement of artificial aggregate prepared with waste concrete powder and its impact on concrete properties
Yi Jiang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Self-compacting concrete manufactured with recycled concrete aggregate: An overview
Victor Revilla-Cuesta et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Durable Performance of Recycled Aggregate Concrete in Aggressive Environments
Claudio J. Zega et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)
Recycled aggregate concretes - A state-of-the-art from the microstructure to the structural performance
Hoai-Bao Le et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Green and Durable Lightweight Aggregate Concrete: The Role of Waste and Recycled Materials
Jiyu Wang et al.
MATERIALS (2020)
Utilization of recycled concrete fines and powders to produce alkali-activated slag concrete blocks
Pengfei Ren et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Manufactured aggregate from cement kiln dust
Craig Lake et al.
ENVIRONMENTAL GEOTECHNICS (2019)
Turning concrete waste powder into carbonated artificial aggregates
Minjiao Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Properties of lightweight concrete made with core-shell structured lightweight aggregate
Feras Tajra et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Valorization of concrete slurry waste (CSW) and fine incineration bottom ash (IBA) into cold bonded lightweight aggregates (CBLAs): Feasibility and influence of binder types
Pei Tang et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
The production and properties of cold-bonded aggregate and its applications in concrete: A review
Feras Tajra et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The durability and environmental properties of self-compacting concrete incorporating cold bonded lightweight aggregates produced from combined industrial solid wastes
P. Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Lightweight expanded clay aggregate as a building material - An overview
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2018)
Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process
Feras Tajra et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A sustainable cold bonded lightweight PCM aggregate production: Its effects on concrete properties
Erman Yigit Tuncel et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight aggregates
Chalermphan Narattha et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Granulation-Carbonation Treatment of Alkali Activated Steel Slag for Secondary Aggregates Production
Milena Morone et al.
WASTE AND BIOMASS VALORIZATION (2017)
LIGHTWEIGHT AGGREGATES MADE FROM FLY ASH USING THE COLD-BOND PROCESS AND THEIR USE IN LIGHTWEIGHT CONCRETE
Ana Frankovic et al.
MATERIALI IN TEHNOLOGIJE (2017)
Integral recycling of municipal solid waste incineration (MSWI) bottom ash fines (0-2 mm) and industrial powder wastes by cold-bonding pelletization
P. Tang et al.
WASTE MANAGEMENT (2017)
Production of carbonate aggregates using steel slag and carbon dioxide for carbon-negative concrete
Zaid Ghouleh et al.
JOURNAL OF CO2 UTILIZATION (2017)
Carbonation of steel slag: testing of the wet route in a pilot-scale reactor
Paola Librandi et al.
13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13 (2017)
Structural concrete using sintered flyash lightweight aggregate: A review
Manu S. Nadesan et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Embodied CO2 Emissions in Building Construction Materials of Hellenic Dwellings
Georgios Syngros et al.
SUSTAINABLE SYNERGIES FROM BUILDINGS TO THE URBAN SCALE (2017)
Oxygen permeability of structural lightweight aggregate concrete
Sofia Real et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Non-structural lightweight concrete with volcanic scoria aggregates for lightweight fill in building's floors
J. Alexandre Bogas et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production
Beatriz Gonzalez-Corrochano et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete
Tommy Yiu Lo et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Development of a new generation of eco-friendly concrete blocks by accelerated mineral carbonation
Dongxing Xuan et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Properties of cold bonded quarry dust coarse aggregates and its use in concrete
Job Thomas et al.
CEMENT & CONCRETE COMPOSITES (2015)
Non-steady-state accelerated chloride penetration resistance of structural lightweight aggregate concrete
J. Alexandre Bogas et al.
CEMENT & CONCRETE COMPOSITES (2015)
Recycling of low-silicon iron tailings in the production of lightweight aggregates
Chuanmeng Yang et al.
CERAMICS INTERNATIONAL (2015)
Artificial fly ash based aggregates properties influence on lightweight concrete performances
Anja Terzic et al.
CERAMICS INTERNATIONAL (2015)
Influence of burning temperature and cooling methods on strength of high carbon ferrochrome slag lightweight aggregate
Shaohua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Properties of semi-lightweight self-consolidating concrete containing lightweight slag aggregate
Ahmed A. Abouhussien et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms
Hongzhi Cui et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
A study of the properties of foamed lightweight aggregate for self-consolidating concrete
Chao-Lung Hwang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age
Dejian Shen et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Accelerated curing effects on the mechanical performance of cold bonded and sintered fly ash aggregate concrete
P. Gomathi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Mechanical and thermophysical properties of lightweight aggregate concretes
Hasan Oktay et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
A review of major non-power-related carbon dioxide stream compositions
George V. Last et al.
ENVIRONMENTAL EARTH SCIENCES (2015)
Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates
Francesco Colangelo et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
Permeation characteristics of self compacting concrete made with partially substitution of natural aggregates with rounded lightweight aggregates
Mehmet Gesoglu et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Recycled aggregate from C&D waste & its use in concrete - A breakthrough towards sustainability in construction sector: A review
Monalisa Behera et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of prefiring and firing dwell times on the properties of artificial lightweight aggregates
Beatriz Gonzalez-Corrochano et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Valorization of steel slag by a combined carbonation and granulation treatment
Milena Morone et al.
MINERALS ENGINEERING (2014)
Identification of design parameters influencing manufacture and properties of cold-bonded pond ash aggregate
V. Vasugi et al.
MATERIALS & DESIGN (2014)
Lightweight backfill materials in integral bridge construction
Luke Davies et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-BRIDGE ENGINEERING (2014)
Sintering Characteristics of Ceramsite Manufactured from Blast Furnace Slag and Sewage Sludge
Z. L. Wang
ASIAN JOURNAL OF CHEMISTRY (2013)
Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates
Erhan Guneyisi et al.
COMPOSITES PART B-ENGINEERING (2013)
Application of water treatment sludge in the manufacturing of lightweight aggregate.
Chung-Ho Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Stabilization of heavy metals in lightweight aggregate made from sewage sludge and river sediment
Guoren Xu et al.
JOURNAL OF HAZARDOUS MATERIALS (2013)
Coal Combustion Wastes Reuse in Low Energy Artificial Aggregates Manufacturing
Claudio Ferone et al.
MATERIALS (2013)
Use of Cement Kiln Dust, Blast Furnace Slag and Marble Sludge in the Manufacture of Sustainable Artificial Aggregates by Means of Cold Bonding Pelletization
Francesco Colangelo et al.
MATERIALS (2013)
Research on using sludge to manufacture lightweight ceramsite and sintering mechanism
Liu Yadong et al.
GREEN BUILDING TECHNOLOGIES AND MATERIALS II (2013)
Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete
Chao-Lung Hwang et al.
CEMENT & CONCRETE COMPOSITES (2012)
Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete
Le Anh-tuan Bui et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
An overview of study on recycled aggregate concrete in China (1996-2011)
Jianzhuang Xiao et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag
Mehmet Gesoglu et al.
MATERIALS AND STRUCTURES (2012)
Characteristics of lightweight fly ash aggregates produced with different binders and heat treatments
Niyazi Ugur Kockal et al.
CEMENT & CONCRETE COMPOSITES (2011)
Effects of heat treatment on the physical properties of lightweight aggregate from water reservoir sediment
Yi-Chong Liao et al.
CERAMICS INTERNATIONAL (2011)
Durability of lightweight concretes with lightweight fly ash aggregates
Niyazi Ugur Kockal et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Optimization of properties of fly ash aggregates for high-strength lightweight concrete production
Niyazi Ugur Kockal et al.
MATERIALS & DESIGN (2011)
Manufacture of artificial aggregate using MSWI bottom ash
R. Cioffi et al.
WASTE MANAGEMENT (2011)
Secondary aggregate from waste treated with carbon dioxide
Peter J. Gunning et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2011)
Microstructure and mineralogy of lightweight aggregates produced from washing aggregate sludge, fly ash and used motor oil
B. Gonzalez-Corrochano et al.
CEMENT & CONCRETE COMPOSITES (2010)
Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate
How-Ji Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Environmental friendly technology of cold-bonded bottom ash aggregate manufacture through chemical activation
S. Geetha et al.
JOURNAL OF CLEANER PRODUCTION (2010)
Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes
Niyazi Ugur Kockal et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge
Yuanfeng Qi et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Reuse potential of low-calcium bottom ash as aggregate through pelletization
S. Geetha et al.
WASTE MANAGEMENT (2010)
Accelerated carbonation of steel slags in a landfill cover construction
S. Diener et al.
WASTE MANAGEMENT (2010)
A review of biogas purification processes
Nicolas Abatzoglou et al.
BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR (2009)
Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete
Glory Joseph et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Mineral carbonation for carbon sequestration in cement kiln dust from waste piles
Deborah N. Huntzinger et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash
B. Gonzalez-Corrochano et al.
RESOURCES CONSERVATION AND RECYCLING (2009)
Production of lightweight aggregate from industrial waste and carbon dioxide
Peter J. Gunning et al.
WASTE MANAGEMENT (2009)
Development of lightweight aggregate from dry sewage sludge and coal ash
Xingrun Wang et al.
WASTE MANAGEMENT (2009)
The effects of accelerated carbonation on CO2 uptake and metal release from incineration APC residues
Renato Baciocchi et al.
WASTE MANAGEMENT (2009)
Effect of curing method on characteristics of cold bonded fly ash aggregates
R. Manikandan et al.
CEMENT & CONCRETE COMPOSITES (2008)
Comparison of rapid and slow sintered pulverised fuel ash
V. Adell et al.
FUEL (2008)
A research on sintering characteristics and mechanisms of dried sewage sludge
Xingrun Wang et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates
Mehmet Gesoglu et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete
K. J. Mun
CONSTRUCTION AND BUILDING MATERIALS (2007)
Influence of fineness of fly ash on the aggregate pelletization process
R. Manikandan et al.
CEMENT & CONCRETE COMPOSITES (2007)
Production of lightweight aggregates from mining residues, heavy metal sludge, and incinerator fly ash
Su-Chen Huang et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)
Byung-wan Jo et al.
CEMENT & CONCRETE COMPOSITES (2007)
Accelerated carbonation of municipal solid waste incineration fly ashes
Xiaomin Li et al.
WASTE MANAGEMENT (2007)
Utilization of fly ash as engineering pellet aggregates
H Arslan et al.
ENVIRONMENTAL GEOLOGY (2006)
Effect Of SiO2-Al2O3-flux ratio change on the bloating characteristics of lightweight aggregate material produced from recycled sewage sludge
Chen-Chiu Tsai et al.
JOURNAL OF HAZARDOUS MATERIALS (2006)
Influence of binders on properties of sintered fly ash aggregate
K Ramamurthy et al.
CEMENT & CONCRETE COMPOSITES (2006)
Influence of pelletization process on the properties of fly ash aggregates
K. I. Hankrishnan et al.
WASTE MANAGEMENT (2006)
Lightweight aggregate made from sewage sludge and incinerated ash
Ing-Jia Chiou et al.
WASTE MANAGEMENT (2006)
Chloride induced reinforcement corrosion in lightweight aggregate high-strength fly ash concrete
O Kayali et al.
CONSTRUCTION AND BUILDING MATERIALS (2005)
Zeolitic tuffs as raw materials for lightweight aggregates
R de' Gennaro et al.
APPLIED CLAY SCIENCE (2004)
Effects of binders on balling behaviors of iron ore concentrates
GZ Qiu et al.
SCANDINAVIAN JOURNAL OF METALLURGY (2004)
A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of CO2
M Fernández Bertos et al.
JOURNAL OF HAZARDOUS MATERIALS (2004)
Limitations of one-dimensional population balance models of wet granulation processes
SM Iveson
POWDER TECHNOLOGY (2002)
Growth and compaction behaviour of copper concentrate granules in a rotating drum
PAL Wauters et al.
POWDER TECHNOLOGY (2002)
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
SM Iveson et al.
POWDER TECHNOLOGY (2001)
Characteristics and properties of a mixture containing fly ash, hydrated lime, and an organic additive
G Marruzzo et al.
ENVIRONMENTAL ENGINEERING SCIENCE (2001)
Utilization of fly ash by pelletization process;: theory, application areas and research results
G Baykal et al.
RESOURCES CONSERVATION AND RECYCLING (2000)
Share Paper
