Related references
Note: Only part of the references are listed.3D bioprinting of graphene oxide-incorporated cell-laden bone mimicking scaffolds for promoting scaffold fidelity, osteogenic differentiation and mineralization
Jianhua Zhang et al.
ACTA BIOMATERIALIA (2021)
Optimization of mechanical stiffness and cell density of 3D bioprinted cell-laden scaffolds improves extracellular matrix mineralization and cellular organization for bone tissue engineering
Jianhua Zhang et al.
ACTA BIOMATERIALIA (2020)
Flow rates in perfusion bioreactors to maximise mineralisation in bone tissue engineering in vitro
Feihu Zhao et al.
JOURNAL OF BIOMECHANICS (2018)
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Soroosh Derakhshanfar et al.
BIOACTIVE MATERIALS (2018)
LOCALISATION OF MINERALISED TISSUE IN A COMPLEX SPINNER FLASK ENVIRONMENT CORRELATES WITH PREDICTED WALL SHEAR STRESS LEVEL LOCALISATION
J. Melke et al.
EUROPEAN CELLS & MATERIALS (2018)
A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks
Liliang Ouyang et al.
ADVANCED MATERIALS (2017)
3D Bioprinting for Tissue and Organ Fabrication
Yu Shrike Zhang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Flow velocity-driven differentiation of human mesenchymal stromal cells in silk fibroin scaffolds: A combined experimental and computational approach
Jolanda Rita Vetsch et al.
PLOS ONE (2017)
Increased lipid accumulation and adipogenic gene expression of adipocytes in 3D bioprinted nanocellulose scaffolds
I. Henriksson et al.
BIOFABRICATION (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Advancing Tissue Engineering: A Tale of Nano-, Micro-, and Macroscale Integration
Jeroen Leijten et al.
SMALL (2016)
3D Bioprinting of Tissue/Organ Models
Falguni Pati et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Bioreactors for tissue engineering: An update
Junjie Zhao et al.
BIOCHEMICAL ENGINEERING JOURNAL (2016)
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Daniel Tang et al.
BIOMATERIALS (2016)
3D bioprinting for engineering complex tissues
Christian Mandrycky et al.
BIOTECHNOLOGY ADVANCES (2016)
High seeding density of human chondrocytes in agarose produces tissue-engineered cartilage approaching native mechanical and biochemical properties
Alexander D. Cigan et al.
JOURNAL OF BIOMECHANICS (2016)
Mechanically reinforced cell-laden scaffolds formed using alginate-based bioink printed onto the surface of a PCL/alginate mesh structure for regeneration of hard tissue
Yong Bok Kim et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)
The influence of curvature on three-dimensional mineralized matrix formation under static and perfused conditions: an in vitro bioreactor model
Jolanda R. Vetsch et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
A decade of progress in tissue engineering
Ali Khademhosseini et al.
NATURE PROTOCOLS (2016)
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Andrew C. Daly et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Hierarchical Fabrication of Engineered Vascularized Bone Biphasic Constructs via Dual 3D Bioprinting: Integrating Regional Bioactive Factors into Architectural Design
Haitao Cui et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro
Deborah G. Nguyen et al.
PLOS ONE (2016)
BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting
Jie Huang et al.
RSC ADVANCES (2016)
A MSCs-laden polycaprolactone/collagen scaffold for bone tissue regeneration
Chul Ho Jang et al.
RSC ADVANCES (2016)
Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs
Sanskrita Das et al.
ACTA BIOMATERIALIA (2015)
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Matti Kesti et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Biofabrication of Cell-Loaded 3D Spider Silk Constructs
Kristin Schacht et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA
Guifang Gao et al.
BIOTECHNOLOGY LETTERS (2015)
A depth dependent transversely isotropic micromechanic model of articular cartilage
Seyed Mohammad Mehdi Elhamian et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)
Progress in material design for biomedical applications
Mark W. Tibbitt et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
The Stiffness and Structure of Three-Dimensional Printed Hydrogels Direct the Differentiation of Mesenchymal Stromal Cells Toward Adipogenic and Osteogenic Lineages
Daniela F. Duarte Campos et al.
TISSUE ENGINEERING PART A (2015)
Bioprinting scale-up tissue and organ constructs for transplantation
Ibrahim T. Ozbolat
TRENDS IN BIOTECHNOLOGY (2015)
A novel cell-printing method and its application to hepatogenic differentiation of human adipose stem cell-embedded mesh structures
Seung Hyun Ahn et al.
SCIENTIFIC REPORTS (2015)
A New Approach for Fabricating Collagen/ECM-Based Bioinks Using Preosteoblasts and Human Adipose Stem Cells
Hyeong Jin Lee et al.
ADVANCED HEALTHCARE MATERIALS (2015)
The evolution of simulation techniques for dynamic bone tissue engineering in bioreactors
Jolanda Rita Vetsch et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2015)
A novel bioprinting method and system for forming hybrid tissue engineering constructs
Y. Shanjani et al.
BIOFABRICATION (2015)
3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers
Mingchun Du et al.
BIOFABRICATION (2015)
Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting
Silke Wuest et al.
ACTA BIOMATERIALIA (2014)
Three-dimensional printing of strontium-containing mesoporous bioactive glass scaffolds for bone regeneration
Jianhua Zhang et al.
ACTA BIOMATERIALIA (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
Thomas Billiet et al.
BIOMATERIALS (2014)
Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells
Meik Neufurth et al.
BIOMATERIALS (2014)
Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells
Guifang Gao et al.
BIOTECHNOLOGY JOURNAL (2014)
Enhancement of cell viability by fabrication of macroscopic 3D hydrogel scaffolds using an innovative cell-dispensing technique supplemented by preosteoblast-laden micro-beads
HyeongJin Lee et al.
CARBOHYDRATE POLYMERS (2014)
Inkjet printing biomaterials for tissue engineering: bioprinting
Rachel Elizabeth Saunders et al.
INTERNATIONAL MATERIALS REVIEWS (2014)
Regenerating Cartilages by Engineered ASCs: Prolonged TGF-β3/BMP-6 Expression Improved Articular Cartilage Formation and Restored Zonal Structure
Chia-Hsin Lu et al.
MOLECULAR THERAPY (2014)
Microfluidic organs-on-chips
Sangeeta N. Bhatia et al.
NATURE BIOTECHNOLOGY (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting
Ju Young Park et al.
BIOFABRICATION (2014)
3D printing of composite tissue with complex shape applied to ear regeneration
Jung-Seob Lee et al.
BIOFABRICATION (2014)
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Riccardo Levato et al.
BIOFABRICATION (2014)
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Falguni Pati et al.
NATURE COMMUNICATIONS (2014)
3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia
Jianhua Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
A direct cell printing supplemented with low-temperature processing method for obtaining highly porous three-dimensional cell-laden scaffolds
Seunghyun Ahn et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
Accelerated myotube formation using bioprinting technology for biosensor applications
Xiaofeng Cui et al.
BIOTECHNOLOGY LETTERS (2013)
Responsive hydrogels - structurally and dimensionally optimized smart frameworks for applications in catalysis, micro-system technology and material science
Artjom Doering et al.
CHEMICAL SOCIETY REVIEWS (2013)
Gelatin-Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue-Engineered Cartilage Constructs
Wouter Schuurman et al.
MACROMOLECULAR BIOSCIENCE (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid
Daniela F. Duarte Campos et al.
BIOFABRICATION (2013)
Strategies for controlled delivery of growth factors and cells for bone regeneration
Tiffany N. Vo et al.
ADVANCED DRUG DELIVERY REVIEWS (2012)
Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation
Xiaofeng Cui et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
The osteoinductive potential of printable, cell-laden hydrogel-ceramic composites
Natalja E. Fedorovich et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Fabrication of cell-laden three-dimensional alginate-scaffolds with an aerosol cross-linking process
SeungHyun Ahn et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system
Jin-Hyung Shim et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
THREE-DIMENSIONAL PRINTERS ARE OPENING UP NEW WORLDS TO RESEARCH.
Nicola Jones
NATURE (2012)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Enhanced Cartilage Formation via Three-Dimensional Cell Engineering of Human Adipose-Derived Stem Cells
Hee Hun Yoon et al.
TISSUE ENGINEERING PART A (2012)
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Xiaofeng Cui et al.
TISSUE ENGINEERING PART A (2012)
Improving Viability of Stem Cells During Syringe Needle Flow Through the Design of Hydrogel Cell Carriers
Brian A. Aguado et al.
TISSUE ENGINEERING PART A (2012)
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Sylvain Catros et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Human Elastic Cartilage Engineering from Cartilage Progenitor Cells Using Rotating Wall Vessel Bioreactor
T. Takebe et al.
TRANSPLANTATION PROCEEDINGS (2012)
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
L. A. Hockaday et al.
BIOFABRICATION (2012)
Engineering spatial control of multiple differentiation fates within a stem cell population
Elmer D. F. Ker et al.
BIOMATERIALS (2011)
Rapid prototyping of tubular polyurethane and cell/hydrogel constructs
Kai He et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2011)
Growth factor delivery-based tissue engineering: general approaches and a review of recent developments
Kangwon Lee et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2011)
Strategies for Enhancing the Accumulation and Retention of Extracellular Matrix in Tissue-Engineered Cartilage Cultured in Bioreactors
Kifah Shahin et al.
PLOS ONE (2011)
Inkjet printing and cell seeding thermoreversible photocurable gel structures
Manuela Di Biase et al.
SOFT MATTER (2011)
Scaffold Porosity and Oxygenation of Printed Hydrogel Constructs Affect Functionality of Embedded Osteogenic Progenitors
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2011)
High Amplitude Direct Compressive Strain Enhances Mechanical Properties of Scaffold-Free Tissue-Engineered Cartilage
Elisa Hoenig et al.
TISSUE ENGINEERING PART A (2011)
Distinct Tissue Formation by Heterogeneous Printing of Osteo- and Endothelial Progenitor Cells
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2011)
Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell-Cell and Cell-Environment Interactions
Martin Gruene et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Laser Printing of Stem Cells for Biofabrication of Scaffold-Free Autologous Grafts
Martin Gruene et al.
TISSUE ENGINEERING PART C-METHODS (2011)
Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite
Sylvain Catros et al.
BIOFABRICATION (2011)
Controlled Positioning of Cells in Biomaterials-Approaches Towards 3D Tissue Printing
Silke Wust et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2011)
Inkjet Printing-Process and Its Applications
Madhusudan Singh et al.
ADVANCED MATERIALS (2010)
Influence of Amide versus Ester Linkages on the Properties of Eight-Armed PEG-PLA Star Block Copolymer Hydrogels
Sytze J. Buwalda et al.
BIOMACROMOLECULES (2010)
Bioreactor based engineering of large-scale human cartilage grafts for joint resurfacing
Rosaria Santoro et al.
BIOMATERIALS (2010)
The generation of 3-D tissue models based on hyaluronan hydrogel-coated microcarriers within a rotating wall vessel bioreactor
Aleksander Skardal et al.
BIOMATERIALS (2010)
Laser assisted bioprinting of engineered tissue with high cell density and microscale organization
Bertrand Guillotin et al.
BIOMATERIALS (2010)
Cellular and Molecular Mechanisms of Bone Remodeling
Liza J. Raggatt et al.
JOURNAL OF BIOLOGICAL CHEMISTRY (2010)
The Role of Endothelial Progenitor Cells in Prevascularized Bone Tissue Engineering: Development of Heterogeneous Constructs
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2010)
Enhanced Bone Morphogenetic Protein-2-Induced Ectopic and Orthotopic Bone Formation by Intermittent Parathyroid Hormone (1-34) Administration
Diederik H. R. Kempen et al.
TISSUE ENGINEERING PART A (2010)
Additive manufacturing for in situ repair of osteochondral defects
Daniel L. Cohen et al.
BIOFABRICATION (2010)
In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice
Virginie Keriquel et al.
BIOFABRICATION (2010)
Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model
Robert Chang et al.
BIOFABRICATION (2010)
LONG-TERM DYNAMIC LOADING IMPROVES THE MECHANICAL PROPERTIES OF CHONDROGENIC MESENCHYMAL STEM CELL-LADEN HYDROGELS
Alice H. Huang et al.
EUROPEAN CELLS & MATERIALS (2010)
Finite element study of scaffold architecture design and culture conditions for tissue engineering
Andy L. Olivares et al.
BIOMATERIALS (2009)
In vitro generation of an osteochondral construct using injectable hydrogel composites encapsulating rabbit marrow mesenchymal stem cells
Xuan Guo et al.
BIOMATERIALS (2009)
Use of rapidly mineralising osteoblasts and short periods of mechanical loading to accelerate matrix maturation in 3D scaffolds
Anuphan Sittichockechaiwut et al.
BONE (2009)
Effect of dynamic 3-D culture on proliferation, distribution, and osteogenic differentiation of human mesenchymal stem cells
Maik Stiehler et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)
Inspiration and application in the evolution of biomaterials
Nathaniel Huebsch et al.
NATURE (2009)
Fabrication and characterization of bio-engineered cardiac pseudo tissues
Tao Xu et al.
BIOFABRICATION (2009)
Engineering functionally graded tissue engineering scaffolds
K. F. Leong et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
Directed three-dimensional patterning of self-assembled peptide fibrils
Valentina Dinca et al.
NANO LETTERS (2008)
Microenvironments engineered by inkjet bioprinting spatially direct adult stem cells toward muscle- and bone-like subpopulations
Julie A. Phillippi et al.
STEM CELLS (2008)
Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART A (2008)
Osteogenesis and angiogenesis: The potential for engineering bone
J. M. Kanczler et al.
EUROPEAN CELLS & MATERIALS (2008)
Differential response of adult and embryonic mesenchymal progenitor cells to mechanical compression in hydrogels
Vanessa Terraciano et al.
STEM CELLS (2007)
Novel anisotropic engineered cardiac tissues: Studies of electrical propagation
Nenad Bursac et al.
BIOCHEMICAL AND BIOPHYSICAL RESEARCH COMMUNICATIONS (2007)
Repair of large osteochondral defects with allogeneic cartilaginous aggregates formed from bone marrow-derived cells using RWV bioreactor
Tomokazu Yoshioka et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2007)
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Shirin Ilkhanizadeh et al.
BIOMATERIALS (2007)
Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds
Tina Mygind et al.
BIOMATERIALS (2007)
Isolation of amniotic stem cell lines with potential for therapy
Paolo De Coppi et al.
NATURE BIOTECHNOLOGY (2007)
Laser microfabrication of hydroxyapatite-osteoblast-like cell composites
A. Doraiswamy et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Immobilized fibrinogen in PEG hydrogels does not improve chondrocyte-mediated matrix deposition in response to mechanical stimulation
Orit Schmidt et al.
BIOTECHNOLOGY AND BIOENGINEERING (2006)
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
T Xu et al.
BIOMATERIALS (2006)
Vascular biology and the skeleton
ML Brandi et al.
JOURNAL OF BONE AND MINERAL RESEARCH (2006)
Soluble osteogenic molecular signals and the induction of bone formation
U Ripamonti
BIOMATERIALS (2006)
Effects of growth factors and cytokines on osteoblast differentiation
FJ Hughes et al.
PERIODONTOLOGY 2000 (2006)
Enhanced repair of articular cartilage defects in vivo by transplanted chondrocytes overexpressing insulin-like growth factor I (IGF-I)
H Madry et al.
GENE THERAPY (2005)
Delivery of bone morphogenetic proteins for orthopedic tissue regeneration
H Seeherman et al.
CYTOKINE & GROWTH FACTOR REVIEWS (2005)
DNA deposition through laser induced forward transfer
M Colina et al.
BIOSENSORS & BIOELECTRONICS (2005)
Laser printing of pluripotent embryonal carcinoma cells
BR Ringeisen et al.
TISSUE ENGINEERING (2004)
Inkjet printing for high-throughput cell patterning
EA Roth et al.
BIOMATERIALS (2004)
Engineering principles of clinical cell-based tissue engineering
GE Muschler et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2004)
Adult mesenchymal stem cells and cell-based tissue engineering
RS Tuan et al.
ARTHRITIS RESEARCH & THERAPY (2003)
Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor
VI Sikavitsas et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Novel crosslinking methods to design hydrogels
WE Hennink et al.
ADVANCED DRUG DELIVERY REVIEWS (2002)
Effect of parathyroid hormone (1-34) on fractures and bone mineral density in postmenopausal women with osteoporosis.
RM Neer et al.
NEW ENGLAND JOURNAL OF MEDICINE (2001)
Functional tissue engineering of articular cartilage through dynamic loading of chondrocyte-seeded agarose gels
RL Mauck et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2000)
Share Paper
