Hydrogen embrittlement characteristics of hot-stamped 22MnB5 steel

Hydrogen embrittlement (HE) characteristics of 22MnB5 steel (U-bent specimen) manufactured using hot-stamping process at various temperatures were experimentally and numerically investigated. Steel resistance to HE was examined through delayed failure tests under static and cyclic loading during hydrogen charging. First, the low cyclic loading caused severe HE, in which a clear difference in the extent of HE was obtained depending on the hot-stamped sample, which directly affected the microstructural characteristics and stress-strain distribution. The hot-stamped samples with large martensite phase showed low resistance to HE compared with those with small martensite phase because of the high concentration of hydrogen trapped in the phase boundaries. Moreover, the dual phase (ferrite and martensite) of the hot-stamped samples reduced their resistance to HE, which is caused by the hydrogen trapped in the laminar-shaped pearlite phase. The resistance to HE was improved by low-temperature heating at 200 degrees C for 1 h because of the generation of e-carbides as trap sites as they render the hydrogen non-diffusible. Furthermore, the internal strain in the U-bent sample could accelerate HE because of the high concentration of hydrogen. These results were verified by experimental and numerical analyses. Thus, the hydrogen trapping mechanism was proposed as a valid mechanism for HE in 22MnB5. (c) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Automated summary

The study investigated the hydrogen embrittlement (HE) characteristics of 22MnB5 steel manufactured using hot-stamping process at different temperatures. Results showed that the martensite phase content and dual-phase structure in hot-stamped samples have an impact on HE, and low-temperature heating can improve resistance to HE.