Related references
Note: Only part of the references are listed.Multi objective taguchi-grey relational analysis and krill herd algorithm approaches to investigate the parametric optimization in abrasive water jet drilling of stainless steel
K. Balaji et al.
APPLIED SOFT COMPUTING (2021)
Micro-Machining of CFRP composite using electrochemical discharge machining and process optimization by Entropy-VIKOR method
Priti et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Multi-objective optimization of surface roughness, recast layer thickness and surface crack density in WEDM of Al2124/SiCp using desirability approach
B. Sridhar Reddy et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Fuzzy possibility regression integrated with fuzzy adaptive neural network for predicting and optimizing electrical discharge machining parameters
Hamed Fazlollahtabar et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2020)
Experimental investigations, empirical modeling and multi objective optimization of performance characteristics for ECDD with pressurized feeding method
Tarlochan Singh et al.
MEASUREMENT (2020)
Population size in Particle Swarm Optimization
Adam P. Piotrowski et al.
SWARM AND EVOLUTIONARY COMPUTATION (2020)
Intelligent 3D tool path planning for optimized 3-axis sculptured surface CNC machining through digitized data evaluation and swarm-based evolutionary algorithms
N. A. Fountas et al.
MEASUREMENT (2020)
Optimization of machining parameters on AA6351 alloy steel using Response Surface Methodology (RSM)
G. Karthik Pandiyan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Experimental investigation and optimization of abrasive water jet machining parameter on multi-walled carbon nanotube doped epoxy/carbon laminate
R. K. Thakur et al.
MEASUREMENT (2020)
Optimization of machining parameters for surface roughness during abrasive water jet machining of aluminium/magnesium hybrid metal matrix composites
D. Maneiah et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Parametric optimization of wirecut-electrical discharge machining through cuckoo search algorithm
M. Saravanan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Experimental investigation and optimization of machining parameters in drilling of fly ash-filled carbon fiber reinforced composites
T. Rajmohan
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
A Hybrid Particle Swarm Optimization-Cuckoo Search Algorithm and Its Engineering Applications
Jinjin Ding et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2019)
Prediction and optimization of machining time and surface roughness of AISI O1 tool steel in wire-cut EDM using robust design and desirability approach
Carmita Camposeco-Negrete
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2019)
Embedding firefly algorithm in optimization of CAPP turning machining parameters for cutting tool selections
Ahmad Faiz Zubair et al.
COMPUTERS & INDUSTRIAL ENGINEERING (2019)
Experimental Investigation and Optimization of Machining Parameters in WEDM of Nano-SiC Particles Reinforced Magnesium Matrix Composites
S. Vijayabhaskar et al.
SILICON (2019)
Optimization of Machining and Geometrical Parameters to Reduce Vibration While Milling Metal Matrix Composite
Rajeswari Sridhar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining
T. Sathish
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Optimization of machining parameters in turning Nimonic-75 using machine vision and acoustic emission signals by Taguchi technique
Y. D. Chethan et al.
MEASUREMENT (2019)
Multi-parameter optimization of machining impeller surface based on the on-machine measuring technique
Gang Wang et al.
CHINESE JOURNAL OF AERONAUTICS (2019)
Evolutionary optimization of jet lag in the abrasive water jet machining
Marin Gostimirovic et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Analytical temperature predictive modeling and non-linear optimization in machining
Elham Mirkoohi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Cutting parameter optimization for machining operations considering carbon emissions
Guanghui Zhou et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Multi-objective optimization of machining parameters to minimize surface roughness and power consumption using TOPSIS
Shailendra Pawanr et al.
7TH CIRP GLOBAL WEB CONFERENCE - TOWARDS SHIFTED PRODUCTION VALUE STREAM PATTERNS THROUGH INFERENCE OF DATA, MODELS, AND TECHNOLOGY (CIRPE 2019) (2019)
Optimization of machining parameters of 2.25Cr1Mo0.25V steel based on response surface method and genetic algorithm
Wei Zhang et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2019)
Parameter Identification of an Activated Sludge Wastewater Treatment Process Based on Particle Swarm Optimization Method
Intissar Khoja et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2018)
Experimental investigations and empirical modeling for optimization of surface roughness and machining time parameters in micro end milling using Genetic Algorithm
S. P. Leo Kumar
MEASUREMENT (2018)
Characterization and optimization of Abrasive Water Jet Machining parameters of aluminium/tungsten carbide composites
K. Ravi Kumar et al.
MEASUREMENT (2018)
Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition
Mozammel Mia et al.
MEASUREMENT (2018)
Multi-Objective Optimization Of Hard Turning: A Genetic Algorithm Approach
Omkar Manav et al.
MATERIALS TODAY-PROCEEDINGS (2018)
BCCS Approach for the Parametric Optimization in Machining of Nimonic-263 alloy using RSM
T. Sathish
MATERIALS TODAY-PROCEEDINGS (2018)
Empirical Modeling & Optimization of Laser Micro - Machining Process Parameters Using Genetic Algorithm
V. Chengal Reddy et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Investigation for obtaining the optimal solution for improving the performance of WEDM of super alloy Udimet-L605 using particle swarm optimization
Somvir Singh Nain et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2018)
Multi-performance optimization in hard turning of AISI 4340 Steel using Particle Swarm Optimization technique
Omkar Manav et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Parametric appraisal and optimization in machining of CFRP composites by using TLBO (teaching-learning based optimization algorithm)
Kumar Abhishek et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2017)
Application of particle swarm optimization and response surface methodology for machining parameters optimization of aluminium matrix composites in milling operation
Rashmi Laxmikant Malghan et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Multi-response optimization of machining parameters in micro milling of alumina ceramics using Nd:YAG laser
Usama Umer et al.
MEASUREMENT (2017)
Critical review of electrochemical honing (ECH): sustainable and alternative gear finishing process. Part 1: conventional processes and introduction to ECH
S. Pathak et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2017)
Critical review of electrochemical honing: sustainable and alternative gear finishing process. Part 2: effects of various process parameters on surface characteristics and material removal rate
S. Pathak et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2017)
Experimentation investigation of abrasive water jet machining parameters using Taguchi and Evolutionary optimization techniques
Rajkamal Shukla et al.
SWARM AND EVOLUTIONARY COMPUTATION (2017)
Optimization of Machining Parameters for Improving Energy Efficiency using Integrated Response Surface Methodology and Genetic Algorithm Approach
Kuldip Singh Sangwan et al.
24TH CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2017)
Cuckoo Search Optimization-A Review
Anuja. S. Joshi et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Evaluation of cutting force and surface roughness in high-speed milling of compacted graphite iron
Mohd Azlan Suhaimi et al.
SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING, SCIENCE AND TECHNOLOGY (SICEST 2016) (2017)
Multipass Turning Operation Process Optimization Using Hybrid Genetic Simulated Annealing Algorithm
Abdelouahhab Jabri et al.
MODELLING AND SIMULATION IN ENGINEERING (2017)
Investigations on surface quality improvement of straight bevel gears by electrochemical honing process
Javed Habib Shaikh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
被撤回的出版物: Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques (Retracted article. See vol. 391, 2023)
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Glowworm swarm optimization (GSO) for optimization of machining parameters
Nurezayana Zainal et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2016)
An effective teaching-learning-based cuckoo search algorithm for parameter optimization problems in structure designing and machining processes
Jida Huang et al.
APPLIED SOFT COMPUTING (2015)
Optimization of Processing Parameters in ECM of Die Tool Steel Using Nanofluid by Multiobjective Genetic Algorithm
V. Sathiyamoorthy et al.
TheScientificWorldJOURNAL (2015)
Optimization of Processing Parameters in ECM of Die Tool Steel Using Nanofluid by Multiobjective Genetic Algorithm
V. Sathiyamoorthy et al.
Scientific World Journal (2015)
Prediction of surface roughness of end milling operation using genetic algorithm
G. Mahesh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Multi-objective optimization of machining parameters considering energy consumption
Qiulian Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining
Girish Kant et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Turning Parameters Optimization using Particle Swarm Optimization
Hrelja Marko et al.
24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 (2014)
Cuckoo search algorithm for the selection of optimal machining parameters in milling operations
Ali R. Yildiz
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites
Thiagarajan Rajmohan et al.
MEASUREMENT (2013)
Multi-objective Optimization of Electrochemical Machining of Hardened Steel Using NSGA II
Biswesh R. Acharya et al.
CHEMICAL, CIVIL AND MECHANICAL ENGINEERING TRACKS OF 3RD NIRMA UNIVERSITY INTERNATIONAL CONFERENCE ON ENGINEERING (NUICONE2012) (2013)
Optimization of process parameters in electro chemical machining (ECM) using DFA-fuzzy set theory-TOPSIS for titanium alloy
M. Santhi et al.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2013)
Optimization of Machining Parameters for End Milling of Inconel 718 Super Alloy Using Taguchi Based Grey Relational Analysis
Lohithaksha M. Maiyar et al.
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) (2013)
Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates
Vijayan Krishnaraj et al.
COMPOSITES PART B-ENGINEERING (2012)
Optimization of machining parameters in rotary EDM process by using the Taguchi method
E. Aliakbari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Optimization of machining parameters in drilling hybrid aluminium metal matrix composites
T. Rajmohan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
OPTIMIZATION OF MACHINING PARAMETERS FOR ALUMINUM AND SILICON CARBIDE COMPOSITE USING GENETIC ALGORITHM
C. Dhavamani et al.
INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)
Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process
Azlan Mohd Zain et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)