Related references
Note: Only part of the references are listed.Flow stress prediction using hyperbolic-sine Arrhenius constants optimised by simple generalised reduced gradient refinement
Michael Oluwatosin Bodunrin
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Boron modified titanium alloys
Gaurav Singh et al.
PROGRESS IN MATERIALS SCIENCE (2020)
The effects of cobalt elements addition on Ti2Ni phases, thermodynamics parameters, crystal structure and transformation temperature of NiTi shape memory alloys
Mediha Kok et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2019)
A-micromechanical model for the grain size dependent super-elasticity degeneration of NiTi shape memory alloys
Yu Chao et al.
MECHANICS OF MATERIALS (2018)
Hot workability of a NiTiCu shape memory alloy with acicular martensite phase based on processing maps
Yanqiu Zhang et al.
INTERMETALLICS (2017)
Effect of Li Addition on the Optimum Thermo-Mechanical Processing Parameters of the Mg Alloy AZ31
Govind Bajargan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Deformation Behavior and Microstructure Evolution of NiTiCu Shape Memory Alloy Subjected to Plastic Deformation at High Temperatures
Shuyong Jiang et al.
METALS (2017)
A systematic investigation on the role of microstructure on phase transformation behavior in Ni-Ti-Fe shape memory alloys
Ritwik Basu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Dynamic recrystallization in a Ni-Ti-Fe shape memory alloy: Effects on austenite-martensite phase transformation
Ritwik Basu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy
Niraj Nayan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Optimization of Hot Working Parameters of As-Forged Nitinol 60 Shape Memory Alloy Using Processing Maps
Xiaoyong Shu et al.
METALS AND MATERIALS INTERNATIONAL (2015)
Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy
Niraj Nayan et al.
INTERMETALLICS (2014)
The high temperature flow behavior modeling of NiTi shape memory alloy employing phenomenological and physical based constitutive models: A comparative study
A. Shamsolhodaei et al.
INTERMETALLICS (2014)
Hot deformation behavior of Ni-Fe-Ga-based ferromagnetic shape memory alloy - A study using processing map
Aniruddha Biswas et al.
INTERMETALLICS (2014)
Microstructure and martensitic transformation of an ultrafine-grained TiNiNb shape memory alloy processed by equal channel angular pressing
Y. X. Tong et al.
INTERMETALLICS (2014)
Antiphase boundary-like structure of B19′ martensite via R-phase transformation in Ti-Ni-Fe alloy
M. Matsuda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Hot deformation and dynamic recrystallization of NiTi intermetallic compound
H. Mirzadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
NiTiCu/AlN/NiTiCu shape memory thin film heterostructures for vibration damping in MEMS
Navjot Kaur et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Hot forging design of as-cast NiTi shape memory alloy
Jong-Taek Yeom et al.
MATERIALS RESEARCH BULLETIN (2014)
Microstructure and martensitic transformation and mechanical properties of cast Ni rich NiTiCo shape memory alloys
N. El-Bagoury
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel
Hamed Mirzadeh et al.
ISIJ INTERNATIONAL (2013)
The effect of training on two-way shape memory effect of binary NiTi and NiTi based ternary high temperature shape memory alloys
K. C. Atli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Dynamic recovery and dynamic recrystallization of NiTi shape memory alloy under hot compression deformation
Shu-yong Jiang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Constitutive behavior of Ni-Ti shape memory alloy under hot compression
Jiang Shu-yong et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2013)
On the explanation for the time-dependence of B2 to R martensitic transformation in Ti50Ni47Fe3 shape memory alloy
Sichuang Xue et al.
MATERIALS LETTERS (2012)
Deformation behavior of TiNiFe alloy in isothermal compression
Wang Shujuan et al.
RARE METALS (2012)
Microstructure evolution and deformation behavior of as-cast NiTi shape memory alloy under compression
Jiang Shu-yong et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
High temperature deformation and processing map of a NiTi intermetallic alloy
M. Morakabati et al.
INTERMETALLICS (2011)
Characterization of the martensitic transformation in Ni50-xTi50Cux alloys through pure thermal measurements
Adelaide Nespoli et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
High-temperature deformation processing maps for a NiTiCu shape memory alloy
Vyasa V. Shastry et al.
JOURNAL OF MATERIALS RESEARCH (2011)
Hot tensile properties and microstructural evolution of as cast NiTi and NiTiCu shape memory alloys
M. Morakabati et al.
MATERIALS & DESIGN (2011)
A study on the hot workability of wrought NiTi shape memory alloy
M. Morakabati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Hot deformation behavior of a medium carbon microalloyed steel
H. Mirzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Influence of Ni on martensitic phase transformations in NiTi shape memory alloys
J. Frenzel et al.
ACTA MATERIALIA (2010)
Low temperature deformation of the R-phase in a NiTiFe shape memory alloy
V. B. Krishnan et al.
APPLIED PHYSICS LETTERS (2010)
High temperature shape memory alloys
J. Ma et al.
INTERNATIONAL MATERIALS REVIEWS (2010)
The effect of Cu addition on the hot deformation behavior of NiTi shape memory alloys
M. Morakabati et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Modeling the hot-deformation behavior of Ni60wt%-Ti40wt% intermetallic alloy
A. A. Khamei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Hot deformation behavior of 60Nitinol (Ni60wt%-Ti40wt%) alloy: Experimental and computational studies
K. Dehghani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Enhancement of fatigue life of Ni-Ti-Fe shape memory alloys by thermal cycling
Sushi K. Giri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
High temperature deformation processing maps for boron modified Ti-6Al-4V alloys
Indrani Sen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Elementary Transformation and Deformation Processes and the Cyclic Stability of NiTi and NiTiCu Shape Memory Spring Actuators
Ch. Grossmann et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Thermomechanical fatigue of shape memory alloys
D. C. Lagoudas et al.
SMART MATERIALS AND STRUCTURES (2009)
Analysis of neutron diffraction spectra acquired in situ during mechanical loading of shape memory NiTiFe at low temperatures
V. B. Krishnan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Power-law creep in near-equiatomic nickel-titanium alloys
Scott M. Oppenheimer et al.
SCRIPTA MATERIALIA (2007)
Aerospace applications of shape memory alloys
D. J. Hartl et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2007)
High temperature shape memory alloys problems and prospects
G. S. Firstov et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2006)
Predicting the critical stress for initiation of dynamic recrystallization
Abbas Najafizadeh et al.
ISIJ INTERNATIONAL (2006)
Physical metallurgy of Ti-Ni-based shape memory alloys
K Otsuka et al.
PROGRESS IN MATERIALS SCIENCE (2005)
Site preference of ternary alloying additions to NiTi: Fe, Pt, Pd, Au, Al, Cu, Zr, and Hf
G Bozzolo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
High-temperature shape memory alloys some recent developments
GS Firstov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Transformation and detwinning induced electrical resistance variations in NiTiCu
T Kotil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
On the hot working characteristics of 6061Al-SiC and 6061-Al2O3 particulate reinforced metal matrix composites
SVSN Murty et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Strain-temperature behavior of NiTiCu shape memory single crystals
H Sehitoglu et al.
ACTA MATERIALIA (2001)
On the transformation behaviour, mechanical properties and biocompatibility of two NiTi-based shape memory alloys: NiTi42 and NiTi42Cu7
M Es-Souni et al.
BIOMATERIALS (2001)
Experimental investigation and thermodynamic calculation of the Ti-Ni-Cu shape memory alloys
W Tang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
Characterization of mechanisms of hot deformation of as-cast nickel aluminide alloy
YVRK Prasad et al.
INTERMETALLICS (2000)
Share Paper
