Related references
Note: Only part of the references are listed.An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification
Zao He et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Mechanical Properties and Formability of Heat-Treated 7000-Series High-Strength Aluminum Alloy: Experiments and Finite Element Modeling
Jinwoo Lee et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Damage evolution around shear loaded intervoid ligaments in plane strain and plane stress
S. Chen et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2020)
Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Some Practical Aspects of Digital Image Correlation Technique to Evaluate Anisotropy Coefficient and Its Comparison with Traditional Method
N. Hedayati et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach
S. F. Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Mechanical and fracture behavior of high strength steels under high strain rate deformation: Experiments and modelling
T. Chiyatan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Analysis of forming limit behaviour of high strength steels under non-linear strain paths using a micromechanics damage modelling
K. Achineethongkham et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal small punch test: Experimental trials, numerical analysis
Tianhan Gao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure and damage based constitutive modelling of hot deformation of titanium alloys
P.F. Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Modeling differential permanent softening under strain-path changes in sheet metals using a modified distortional hardening model
Jinwoo Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Correlative Study on Plastic Response and Formability of Ti-6Al-4V Sheets under Hot Forming Conditions
Hyuk Jong Bong et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Mechanism-based constitutive modeling of ZEK100 magnesium alloy with crystal plasticity and in-situ HEXRD experiment
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Ductile fracture behavior of ECAP deformed AZ61 magnesium alloy based on response surface methodology and finite element simulation
Addisu Negash Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α plus β phase region
Paul M. Souza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanical behaviour modelling and finite element simulation of simple part of Ti-6Al-4V sheet under hot/warm stamping conditions
Quentin Sirvin et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Behaviour and constitutive modelling of ductile damage of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si alloy under hot tensile deformation
Junling Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Failure characteristics of advanced high strength steels at macro and micro scales
Vivek K. Barnwal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Alloys-by-design: Application to titanium alloys for optimal superplasticity
E. Alabort et al.
ACTA MATERIALIA (2019)
Thermal forming limit diagram (TFLD) of AA7075 aluminum alloy based on a modified continuum damage model: Experimental and theoretical investigations
Hai Rong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation
Liang Ying et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of hardening on toughness captured by stress-based damage nucleation in 6061 aluminum alloy
Tom Petit et al.
ACTA MATERIALIA (2019)
Ductile fracture of an aluminum sheet under proportional loading
Jinjin Ha et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Modelling of fracture occurrence in Ti6Al4V sheets at elevated temperature accounting for anisotropic behaviour
Qiaoling Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Experimental and numerical investigation of ductile fracture using GTN damage model on in-situ tensile tests
H. Gholipour et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Measurement of directional anisotropy coefficients for AA7020-T6 tubes and prediction of forming limit curve
F. Mousavi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Unified modelling of the flow behaviour and softening mechanism of a TC6 titanium alloy during hot deformation
Junling Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Application of small punch test to investigate mechanical behaviours and deformation characteristics of Incoloy800H
Sisheng Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Formability and microstructure evolution mechanisms of Ti6Al4V alloy during a novel hot stamping process
Mateusz Kopec et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Hosford-Coulomb ductile failure model for shell elements: Experimental identification and validation for DP980 steel and aluminum 6016-14
Keunhwan Pack et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Application of a continuum damage mechanics (CDM)-based model for predicting formability of warm formed aluminium alloy
Q. Bai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
An experimental and numerical investigation on the formability of AA7075 sheet in hot stamping condition
Wenchao Xiao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Johnson-Cook based criterion incorporating stress triaxiality and deviatoric effect for predicting elevated temperature ductility of titanium alloy sheets
Beatrice Valoppi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Numerical Predictions of the Occurrence of Necking in Deep Drawing Processes
Hocine Chalal et al.
METALS (2017)
Oxidation behavior and microstructural decomposition of Ti-6Al-4V and Ti-6Al-4V-1B sheet
D. A. Brice et al.
CORROSION SCIENCE (2016)
Behavior modeling and microstructural evolutions of Ti-6Al-4V alloy under hot forming conditions
V. Velay et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Effect of Superplastic Forming Exposure on Fatigue Crack Propagation Behavior of Ti-6Al-4V Alloy
Daeho Jeong et al.
METALS AND MATERIALS INTERNATIONAL (2016)
Superplasticity in Ti-6Al-4V: Characterisation, modelling and applications
E. Alabort et al.
ACTA MATERIALIA (2015)
Characterization of mechanical property of magnesium AZ31 alloy sheets for warm temperature forming
Youngwoo Koh et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
An experimental and numerical study for the damage characterization of a Ti-6AL-4V titanium alloy
Nima Allahverdizadeh et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Properties controlling the bend-assisted fracture of AHSS
J. Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Oxidation and alpha-case formation in Ti-6Al-2Sn-4Zr-2Mo alloy
Raghuveer Gaddam et al.
MATERIALS CHARACTERIZATION (2015)
Fracture Criterion for AZ31 Mg Alloy Plate at Elevated Temperature
Dong-Yoon Seok et al.
METALS AND MATERIALS INTERNATIONAL (2015)
Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect
Hyun-Ho Bok et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Forming limit criterion for ductile anisotropic sheets as a material property and its deformation path insensitivity. Part I: Deformation path insensitive formula based on theoretical models
Kwansoo Chung et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Formability of austenitic and ferritic stainless steels at warm forming temperature
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Micromechanical modelling of damage behaviour of Ti-6Al-4V
S. Katani et al.
MATERIALS & DESIGN (2013)
Modelling of dominant softening mechanisms for Ti-6Al-4V in steady state hot forming conditions
Q. Bai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Thermo-mechanical sheet metal forming of aero engine components in Ti-6Al-4V-PART 1: Material characterisation
E. -L. Odenberger et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2013)
The forming limit diagram of ferritic stainless steel sheets: Experiments and modeling
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)
A criterion for the onset of void coalescence under combined tension and shear
C. Tekoglu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
A plastic constitutive equation incorporating strain, strain-rate, and temperature
Ji Hyun Sung et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals
Matthieu Dunand et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Relations between a micro-mechanical model and a damage model for ductile failure in shear
Viggo Tvergaard et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Modification of the Gurson Model for shear failure
K. Nahshon et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)
On some topics for the numerical simulation of ductile fracture
P. J. Sanchez et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Deformation mechanisms of Ti-6Al-4V during tensile behavior at low strain rate
M. Vanderhasten et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2007)
Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: Experiments and modeling over a wide range of strain-rates and temperatures
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
A lower bound damage-based finite element simulation of stretch flange forming of Al-Mg alloys
Cliff Butcher et al.
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys
AS Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
On fracture locus in the equivalent strain and stress triaxiality space
YB Bao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)
Share Paper
