Related references
Note: Only part of the references are listed.Production of antihyerglycemic and antihypertensive drug loaded sustained release nanoparticles using spray drying technique: Optimization by Placket Burman Design
Gokul Khairnar et al.
DRYING TECHNOLOGY (2022)
Preparation, optimization, characterization, and in vitro bioaccessibility of a lutein microparticle using spray drying with β-cyclodextrin and stevioside
Peng-Xiang Xu et al.
JOURNAL OF FOOD PROCESSING AND PRESERVATION (2021)
Using Acetone/Water Binary Solvent to Enhance the Stability and Bioavailability of Spray Dried Enzalutamide/HPMC-AS Solid Dispersions
Xiaoting Zhang et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Microfluidic spray dried and spray freeze dried uniform microparticles potentially for intranasal drug delivery and controlled release
Aijun Di et al.
POWDER TECHNOLOGY (2021)
Enhancement of the extra-fine particle fraction of levofloxacin embedded in excipient matrix formulations for dry powder inhaler using response surface methodology
Jun Yee Tse et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
Development of a formulation platform for a spray-dried, inhalable tuberculosis vaccine candidate
Mellissa Gomez et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Development of respirable rifampicin loaded bovine serum albumin formulation for the treatment of pulmonary tuberculosis
Monica Joshi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
Investigation of hydroxypropyl-β-cyclodextrin inclusion complexation of two poorly soluble model drugs and their taste-sensation - Effect of electrolytes, freeze-drying and incorporation into oral film formulations
Julia F. Alopaeus et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2021)
Development and Evaluation of Ibuprofen Loaded Hydrophilic Biocompatible Polymeric Nanoparticles for the Taste Masking and Solubility Enhancement
Jitendra Naik et al.
BIONANOSCIENCE (2021)
Generation of sustained release chitosan nanoparticles for delivery of ketorolac tromethamine: a tubular microreactor approach
Jayesh Patil et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2020)
Preparation of Efavirenz resinate by spray drying using response surface methodology and its physicochemical characterization for taste masking
Umakant Verma et al.
DRYING TECHNOLOGY (2020)
Encapsulation and delivery of bioactive compounds using spray and freeze-drying techniques: A review
Amir Rezvankhah et al.
DRYING TECHNOLOGY (2020)
Development of β-carotene aerosol formulations using a modified spray dryer
Malur Narayanaswamy Lavanya et al.
JOURNAL OF FOOD PROCESS ENGINEERING (2020)
A particle technology approach toward designing dry-powder inhaler formulations for personalized medicine in respiratory diseases
Kazunori Kadota et al.
ADVANCED POWDER TECHNOLOGY (2020)
Mechanisms of increased bioavailability through amorphous solid dispersions: a review
Andreas Schittny et al.
DRUG DELIVERY (2020)
Soluplus® based solid dispersion as fast disintegrating tablets: a combined experimental approach for enhancing the dissolution and antiulcer efficacy of famotidine
Mona Basha et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Application of spray freeze drying to theophylline-oxalic acid cocrystal engineering for inhaled dry powder technology
Ryoma Tanaka et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Formation of ciprofloxacin nanocrystals within liposomes by spray drying for controlled release via inhalation
Isra Khatib et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
An effective polyvinyl alcohol for the solubilization of poorly water-soluble drugs in solid dispersion formulations
Yoshiaki Umemoto et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems
Suresh Potharaju et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2020)
Spray Dried Formulations for Inhalation-Meaningful Characterisation of Powder Properties
Angelika Jueptner et al.
PHARMACEUTICS (2020)
Oral controlled release dosage forms: dissolution versus diffusion
Marival Bermejo et al.
EXPERT OPINION ON DRUG DELIVERY (2020)
Effect of chitosan coating on the properties of nanoliposomes loaded with flaxseed-peptide fractions: Stability during spray-drying
Khashayar Sarabandi et al.
FOOD CHEMISTRY (2020)
Spray-dried raloxifene submicron particles for pulmonary delivery: Development and in vivo pharmacokinetic evaluation in rats
Marcia Camponogara Fontana et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Preparation and evaluation of inhalable dry powder containing glucosamine-conjugated gefitinib SLNs for lung cancer therapy
Nazafarin Satari et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2020)
Effect of formulation and inhaler parameters on the dispersion of spray freeze dried voriconazole particles
Qiuying Liao et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Amorphous solid dispersions: An update for preparation, characterization, mechanism on bioavailability, stability, regulatory considerations and marketed products
Palpandi Pandi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Spray Freeze-Drying as a Solution to Continuous Manufacturing of Pharmaceutical Products in Bulk
Merve B. Adali et al.
PROCESSES (2020)
QbD based approach for formulation development of spray dried microparticles of erlotinib hydrochloride for sustained release
Govind Soni et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Multicomponent solid dispersion a new generation of solid dispersion produced by spray-drying
Laura Modica De Mohac et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Preparation and characterization of sustained release pirfenidone loaded microparticles for pulmonary drug delivery: Spray drying approach
Sagar Pardeshi et al.
DRYING TECHNOLOGY (2020)
Development and characterization of curcumin-loaded solid self-emulsifying drug delivery system (SEDDS) by spray drying using Soluplus® as solid carrier
Mohammad M. Kamal et al.
POWDER TECHNOLOGY (2020)
Effects of a novel roflumilast and formoterol fumarate dry powder inhaler formulation in experimental allergic asthma
Erika Yoko Suzuki et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Amorphous solid dispersion dry powder for pulmonary drug delivery: Advantages and challenges
Khaled AboulFotouh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Effects of storage on the stability and aerosolization efficiency of dry powder inhaler formulation of plasmid DNA-Chitosan nanoparticles
The-Thien Tran et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Inhalable microparticles containing terbinafine for management of pulmonary fungal infections: Spray drying process engineering using lactose vs. mannitol as excipients
Khaled Almansour et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Electrospray drying of docetaxel nanosuspension: A study on particle formation and evaluation of nanocrystals thereof
Shreya Thakkar et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Preparation of spray dried amorphous solid dispersion of diosmin in soluplus with improved hepato-renoprotective activity: In vitro anti-oxidant and in-vivo safety studies
Md Khalid Anwer et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats
Mohammed Muqtader Ahmed et al.
SAUDI PHARMACEUTICAL JOURNAL (2020)
Production of bromelain aerosols using spray-freeze-drying technique for pulmonary supplementation
M. N. Lavanya et al.
DRYING TECHNOLOGY (2020)
Potential of solid dispersions to enhance solubility, bioavailability, and therapeutic efficacy of poorly water-soluble drugs: newer formulation techniques, current marketed scenario and patents
Sultan Alshehri et al.
DRUG DELIVERY (2020)
Overview of Extensively Employed Polymeric Carriers in Solid Dispersion Technology
Athira R. Nair et al.
AAPS PHARMSCITECH (2020)
Mucoadhesive Micro-/Nano Carriers in Ophthalmic Drug Delivery: an Overview
Jitendra B. Naik et al.
BIONANOSCIENCE (2020)
Preparation and characterization of miglitol-loaded Poly (d, l-lactide-co-glycolide) microparticles using high pressure homogenization-solvent evaporation method
Mrunal Waghulde et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
Preparation and characterization of ketorolac tromethamine-loaded ethyl cellulose micro-/nanospheres using different techniques
Pankaj Wagh et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
Preparation and characterization of miglitol-loaded Poly (d, l-lactide-co-glycolide) microparticles using high pressure homogenization-solvent evaporation method
Mrunal Waghulde et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
Production and evaluation of vildagliptin-loaded poly(dl-lactide) and poly(dl-lactide-glycolide) micro-/nanoparticles: Response surface methodology approach
Mrunal Waghulde et al.
DRYING TECHNOLOGY (2019)
Encapsulation efficiency and controlled release of Ganoderma lucidum polysaccharide microcapsules by spray drying using different combinations of wall materials
Ping Shao et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Characterization of biopolymer-based systems obtained by spray-drying for retinoic acid controlled delivery
Antonia Goncalves et al.
POWDER TECHNOLOGY (2019)
Evaluation of the bioavailability of hydrocortisone when prepared as solid dispersion
Mohammad A. Altamimi et al.
SAUDI PHARMACEUTICAL JOURNAL (2019)
Ethylcellulose in Organic Solution or Aqueous Dispersion Form in Designing Taste-Masked Microparticles by the Spray Drying Technique with a Model Bitter Drug: Rupatadine Fumarate
Katarzyna Wasilewska et al.
POLYMERS (2019)
Improved Drug Loading and Sustained Release of Entecavir-loaded PLGA Microsphere Prepared by Spray Drying Technique
Sung Rae Kim et al.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2019)
Recent advances in aerosolised drug delivery
Akshay Chandel et al.
BIOMEDICINE & PHARMACOTHERAPY (2019)
Porous and highly dispersible voriconazole dry powders produced by spray freeze drying for pulmonary delivery with efficient lung deposition
Qiuying Liao et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Scale-up of pharmaceutical spray drying using scale-up rules: A review
Sadegh Poozesh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Spray freeze drying: Emerging applications in drug delivery
D. A. Vishali et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Can spray freeze-drying improve the re-dispersion of crystalline nanoparticles of pure naproxen?
Veronika Braig et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Multi-scale analysis of amorphous solid dispersions prepared by freeze drying of ibuprofen loaded acrylic polymer nanoparticles
Fatima Hassouna et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)
Self-Assembly of Ordered Microparticle Monolayers from Drying a Droplet on a Liquid Substrate
Weibin Li et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)
Sustained Release Ziprasidone Microparticles Prepared by Spray Drying with Soluplus® and Ethyl Cellulose to Eliminate Food Effect and Enhance Bioavailability
Wenjie Liu et al.
AAPS PHARMSCITECH (2019)
Dual cross-linked chitosan microspheres formulated with spray-drying technique for the sustained release of levofloxacin
Jing Zhou et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2019)
Spray drying of pharmaceuticals and biopharmaceuticals: Critical parameters and experimental process optimization approaches
Ahmad Ziaee et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Drying technology strategies for colon-targeted oral delivery of biopharmaceuticals
Panna Vass et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Optimization of a dry powder inhaler of ciprofloxacin-loaded polymeric nanomicelles by spray drying process
Mahdieh Farhangi et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2019)
Elucidating spray-dried dispersion dissolution mechanisms with focused beam reflectance measurement: contribution of polymer chemistry and particle properties to performance
Clare Frances Rawlinson-Malone et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2019)
Cellulose based polymers in development of amorphous solid dispersions
Rahul B. Chauan et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Solidification of meloxicam self-nano emulsifying drug delivery system formulation incorporated into soluble and insoluble carriers using freeze drying method
I. Kuncahyo et al.
INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS FOR BETTER FUTURE 2018 (2019)
The design and scale-up of spray dried particle delivery systems
Ali Al-Khattawi et al.
EXPERT OPINION ON DRUG DELIVERY (2018)
New Strategies for Improving the Development and Performance of Amorphous Solid Dispersions
Abbe Haser et al.
AAPS PHARMSCITECH (2018)
Influence of excipients on physical and aerosolization stability of spray dried high-dose powder formulations for inhalation
Nivedita Shetty et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Recent strategies in spray drying for the enhanced bioavailability of poorly water-soluble drugs
Mark Davis et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Taste Masking Approaches for Medicines
Waleed Faisal et al.
CURRENT DRUG DELIVERY (2018)
Pharmaceutical Dispersion Techniques for Dissolution and Bioavailability Enhancement of Poorly Water-Soluble Drugs
Xingwang Zhang et al.
PHARMACEUTICS (2018)
Drying Technologies for the Stability and Bioavailability of Biopharmaceuticals
Fakhrossadat Emami et al.
PHARMACEUTICS (2018)
Development and functional characterization of composite freeze dried wafers for potential delivery of low dose aspirin for elderly people with dysphagia
Smirna Farias et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Development of pH-Dependent Nanospheres for Nebulisation- In vitro Diffusion, Aerodynamic and Cytotoxicity Studies
Pradum P. Ige et al.
DRUG RESEARCH (2018)
Production of aceclofenac-loaded sustained release micro/nanoparticles using pressure homogenization and spray drying
Rameshwar Deshmukh et al.
DRYING TECHNOLOGY (2018)
Drying technologies for biopharmaceutical applications: Recent developments and future direction
Alex Langford et al.
DRYING TECHNOLOGY (2018)
Use of Spray-Dried Dispersions in Early Pharmaceutical Development: Theoretical and Practical Challenges
Jinjiang Li et al.
AAPS JOURNAL (2017)
Drying of pharmaceuticals in theory and practice
Ian C. Kemp
DRYING TECHNOLOGY (2017)
Dry powder inhalation: past, present and future
A. H. de Boer et al.
EXPERT OPINION ON DRUG DELIVERY (2017)
Mechanical microencapsulation: The best technique in taste masking for the manufacturing scale - Effect of polymer encapsulation on drug targeting
Basheer Al-kasmi et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Advances in nanomicelles for sustained drug delivery
Najmeh Amirmahani et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)
How Vial Geometry Variability Influences Heat Transfer and Product Temperature During Freeze-Drying
Bernadette Scutella et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2017)
Screening of process variables to enhance the solubility of famotidine with 2-HydroxyPropyl-β-Cyclodextrin & PVP K-30 by using Plackett-Burman design approach
Umakant Verma et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
The use of spray freeze drying for dissolution and oral bioavailability improvement of Azithromycin
Ehsan Adeli
POWDER TECHNOLOGY (2017)
Design and characterization of controlled-release vitamin A microparticles prepared by a spray-drying process
Antonia Goncalves et al.
POWDER TECHNOLOGY (2017)
In-situ freeze-drying - forming amorphous solids directly within capsules: An investigation of dissolution enhancement for a poorly soluble drug
Abdulmalik Alqurshi et al.
SCIENTIFIC REPORTS (2017)
Comparative study of encapsulated vildagliptin microparticles produced by spray drying and solvent evaporation technique
Mrunal Waghulde et al.
DRYING TECHNOLOGY (2017)
Biopharmaceutical Evaluation and CMC Aspects of Oral Modified Release Formulations
Rong-Kun Chang et al.
AAPS JOURNAL (2017)
Development of mefenamic acid-loaded polymeric microparticles using solvent evaporation and spray-drying technique
Pankaj S. Wagh et al.
DRYING TECHNOLOGY (2016)
Spray drying with a two-fluid nozzle to produce fine particles: Atomization, scale-up, and modeling
I. C. Kemp et al.
DRYING TECHNOLOGY (2016)
Control of the radial distribution of chemical components in spray-dried crystalline microparticles
Alberto Baldelli et al.
AEROSOL SCIENCE AND TECHNOLOGY (2016)
Improved stability and controlled release of CLA with spray-dried microcapsules of OSA-modified starch and xanthan gum
Huizi He et al.
CARBOHYDRATE POLYMERS (2016)
Dry powder aerosols of curcumin-chitosan nanoparticle complex prepared by spray freeze drying and their antimicrobial efficacy against common respiratory bacterial pathogens
Hong Yu et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)
Controversies with self-emulsifying drug delivery system from pharmacokinetic point of view
Bappaditya Chatterjee et al.
DRUG DELIVERY (2016)
Optimization of spray-dried diclofenac sodium-loaded microspheres by screening design
Rameshwar K. Deshmukh et al.
DRYING TECHNOLOGY (2016)
Solvent evaporation and spray drying technique for micro- and nanospheres/particles preparation: A review
Rameshwar Deshmukh et al.
DRYING TECHNOLOGY (2016)
Formulation of metformin hydrochloride nanoparticles by using spray drying technique and in vitro evaluation of sustained release with 32-level factorial design approach
Vinod Mokale et al.
DRYING TECHNOLOGY (2016)
Application of freeze-drying in the development of oral drug delivery systems
Carin Ru Shan Siow et al.
EXPERT OPINION ON DRUG DELIVERY (2016)
Quercetin-loaded freeze-dried nanomicelles: Improving absorption and anti-glioma efficiency in vitro and in vivo
Gang Wang et al.
JOURNAL OF CONTROLLED RELEASE (2016)
Support Tools in Formulation Development for Poorly Soluble Drugs
Gudrun A. Fridgeirsdottir et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Development and Characterization of Sodium Hyaluronate Microparticle-Based Sustained Release Formulation of Recombinant Human Growth Hormone Prepared by Spray-Drying
Sun J. Kim et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Spray-dried powders improve the controlled release of antifungal tioconazole-loaded polymeric nanocapsules compared to with lyophilized products
Roseane Fagundes Ribeiro et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Influence of physical properties of carrier on the performance of dry powder inhalers
Tingting Peng et al.
ACTA PHARMACEUTICA SINICA B (2016)
Preparation and characterization of spray-dried valsartan-loaded Eudragit® E PO solid dispersion microparticles
Roshan Pradhan et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
The Future of Industrial Bioprocessing: Batch or Continuous?
Matthew S. Croughan et al.
BIOTECHNOLOGY AND BIOENGINEERING (2015)
Analysis of the impact of controlled release formulations on oral drug absorption, gut wall metabolism and relative bioavailability of CYP3A substrates using a physiologically-based pharmacokinetic model
Andres Olivares-Morales et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
In-vitro and in-vivo evaluation of taste-masked cetirizine hydrochloride formulated in oral lyophilisates
Maren Preis et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Pharmaceutical spray freeze drying
Stefan Wanning et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Deposition of aerosol particles from a subway microenvironment in the human respiratory tract
Vania Martins et al.
JOURNAL OF AEROSOL SCIENCE (2015)
Optimization of sustained release aceclofenac microspheres using response surface methodology
Rameshwar K. Deshmukh et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Spray-freeze-drying: A novel process for the drying of foods and bioproducts
S. Padma Ishwarya et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2015)
Revealing facts behind spray dried solid dispersion technology used for solubility enhancement
Bhavesh B. Patel et al.
SAUDI PHARMACEUTICAL JOURNAL (2015)
Crack formation and prevention in colloidal drops
Jin Young Kim et al.
SCIENTIFIC REPORTS (2015)
Spray drying of a poorly water-soluble drug nanosuspension for tablet preparation: formulation and process optimization with bioavailability evaluation
Wei Sun et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2015)
Inhalation drug delivery devices: technology update
Mariam Ibrahim et al.
MEDICAL DEVICES-EVIDENCE AND RESEARCH (2015)
Spray freeze drying for dry powder inhalation of nanoparticles
Mohamed Ehab Ali et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2014)
Next Generation Drying Technologies for Pharmaceutical Applications
Robert H. Walters et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Oral Delivery of Highly Lipophilic Poorly Water-Soluble Drugs: Spray-Dried Dispersions to Improve Oral Absorption and Enable High-Dose Toxicology Studies of a P2Y1 Antagonist
Xue-Qing Chen et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
In vitro and in vivo evaluation of clarithromycin-urea solid dispersions prepared by solvent evaporation, electrospraying and freeze drying methods
Ghobad Mohammadi et al.
POWDER TECHNOLOGY (2014)
The clinical relevance of dry powder inhaler performance for drug delivery
Pascal Demoly et al.
RESPIRATORY MEDICINE (2014)
Pharmaceutical particle technologies: An approach to improve drug solubility, dissolution and bioavailability
Prakash Khadka et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
The Effect of Acid pH Modifiers on the Release Characteristics of Weakly Basic Drug from Hydrophlilic-Lipophilic Matrices
Katerina Dvorackova et al.
AAPS PHARMSCITECH (2013)
Quality by Design: Scale-Up of Freeze-Drying Cycles in Pharmaceutical Industry
Roberto Pisano et al.
AAPS PHARMSCITECH (2013)
In vitro and in vivo correlation of disintegration and bitter taste masking using orally disintegrating tablet containing ion exchange resin-drug complex
Jong-Il Kim et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Advanced spray-dried design, physicochemical characterization, and aerosol dispersion performance of vancomycin and clarithromycin multifunctional controlled release particles for targeted respiratory delivery as dry powder inhalation aerosols
Chun-Woong Park et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Lyophilization Process Design Space
Sajal Manubhai Patel et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Evaporation Stains: Suppressing the Coffee-Ring Effect by Contact Angle Hysteresis
Yueh-Feng Li et al.
LANGMUIR (2013)
Surface Characteristics of Spray-Dried Microspheres Consisting of PLGA and PVP: Relating the Influence of Heat and Humidity to the Thermal Characteristics of These Polymers
Joke Meeus et al.
MOLECULAR PHARMACEUTICS (2013)
Improvement of the dispersibility of spray-dried budesonide powders using leucine in an ethanol-water cosolvent system
Mohammed A. Boraey et al.
POWDER TECHNOLOGY (2013)
Fundamental analysis of particle formation in spray drying
Joao Vicente et al.
POWDER TECHNOLOGY (2013)
Integrated continuous production of recombinant therapeutic proteins
Veena Warikoo et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Nanoscale surface characterization and miscibility study of a spray-dried injectable polymeric matrix consisting of poly(lactic-co-glycolic acid) and polyvinylpyrrolidone
Joke Meeus et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2012)
Pharmaceutical spray drying: solid-dose process technology platform for the 21st century
Herman E. Snyder
THERAPEUTIC DELIVERY (2012)
Improvement of the bitter taste of drugs by complexation with cyclodextrins: applications, evaluations and mechanisms
Hidetoshi Arima et al.
THERAPEUTIC DELIVERY (2012)
Comparison of Spray Freeze Drying and the Solvent Evaporation Method for Preparing Solid Dispersions of Baicalein with Pluronic F68 to Improve Dissolution and Oral Bioavailability
Xiuqiong He et al.
AAPS PHARMSCITECH (2011)
Emerging Freeze-Drying Process Development and Scale-up Issues
Sajal Manubhai Patel et al.
AAPS PHARMSCITECH (2011)
Mupirocin calcium microencapsulation via spray drying: feed solvent influence on microparticle properties, stability and antimicrobial activity
Marjana Duerrigl et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2011)
Scale-up and Process Transfer of Freeze-Drying Recipes
Davide Fissore et al.
DRYING TECHNOLOGY (2011)
Spray freeze drying with polyvinylpyrrolidone and sodium caprate for improved dissolution and oral bioavailability of oleanolic acid, a BCS Class IV compound
Henry H. Y. Tong et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Suppression of the coffee-ring effect by shape-dependent capillary interactions
Peter J. Yunker et al.
NATURE (2011)
Oral modified-release formulations in motion: The relationship between gastrointestinal transit and drug absorption
Felipe J. O. Varum et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2010)
Spray Drying Technique: II. Current Applications in Pharmaceutical Technology
Krzysztof Sollohub et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2010)
Modelling particle deposition in human lungs: modelling concepts and comparison with experimental data
Werner Hofmann
BIOMARKERS (2009)
A Model-Based Methodology for Spray-Drying Process Development
Dan E. Dobry et al.
JOURNAL OF PHARMACEUTICAL INNOVATION (2009)
Taste Masking by Spray-Drying Technique
Divyakumar Bora et al.
AAPS PHARMSCITECH (2008)
Preparation and characterisation of controlled release co-spray dried drug-polymer microparticles for inhalation 1: Influence of polymer concentration on physical and in vitro characteristics
Rania Salama et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Preparation and characterisation of controlled release co-spray dried drug-polymer microparticles for inhalation 2:: Evaluation of in vitro release profiling methodologies for controlled release respiratory aerosols
Rania O. Salama et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Systems for region selective drug delivery in the gastrointestinal tract: biopharmaceutical considerations
Leonid Kagan et al.
EXPERT OPINION ON DRUG DELIVERY (2008)
Freeze drying of peptide drugs self-associated with long-circulating, biocompatible and biodegradable sterically stabilized phospholipid nanomicelles
Sok Bee Lim et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2008)
Engineering of pharmaceutical materials: An industrial perspective
Kwok Chow et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Hydroxypropyl Methylcellulose Acetate Succinate-Based Spray-Dried Dispersions: An Overview
Dwayne T. Friesen et al.
MOLECULAR PHARMACEUTICS (2008)
Scaling up the spray drying process from pilot to production scale using an atomized droplet size criterion
Pia Thybo et al.
PHARMACEUTICAL RESEARCH (2008)
Pharmaceutical particle engineering via spray drying
Reinhard Vehring
PHARMACEUTICAL RESEARCH (2008)
Particle formation in spray drying
Reinhard Vehring et al.
JOURNAL OF AEROSOL SCIENCE (2007)
Practical approaches of taste masking technologies in oral solid forms
Dionysios Douroumis
EXPERT OPINION ON DRUG DELIVERY (2007)
Design of fine particles for pulmonary drug delivery
Jeffry G. Weers et al.
EXPERT OPINION ON DRUG DELIVERY (2007)
Role of freeze drying in nanotechnology
Guohua Chen et al.
DRYING TECHNOLOGY (2007)
Particle engineering for pulmonary drug delivery
Albert H. L. Chow et al.
PHARMACEUTICAL RESEARCH (2007)
Freeze-drying of pharmaceutical products: Research and development needs
H. Sadikoglu et al.
DRYING TECHNOLOGY (2006)
Formulating drug delivery systems by spray drying
MI Re
DRYING TECHNOLOGY (2006)
Spray drying of biopharmaceuticals: Stability and process considerations
Mahmoud Ameri et al.
DRYING TECHNOLOGY (2006)
The influence of formulation components on the aerosolisation properties of spray-dried powders
NR Rabbani et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Pharmaceutical applications of ion-exchange resins
DP Elder
JOURNAL OF CHEMICAL EDUCATION (2005)
Design of freeze-drying processes for pharmaceuticals: Practical advice
XL Tang et al.
PHARMACEUTICAL RESEARCH (2004)
Freeze drying - principles and practice for successful scale-up to manufacturing
SC Tsinontides et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Improvement of dissolution rates of poorly water soluble APIs using novel spray freezing into liquid technology
JH Hu et al.
PHARMACEUTICAL RESEARCH (2002)
Protein spray freeze drying. 2. Effect of formulation variables on particle size and stability
HR Costantino et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2002)
Share Paper
