Related references
Note: Only part of the references are listed.Structural design and ablation performance of ZrB2/MoSi2 laminated coating for SiC coated carbon/carbon composites
Hu Dou et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Ultra-high-temperature ablation behavior of SiC-ZrC-TiC modified carbon/carbon composites fabricated via reactive melt infiltration
Yi Zeng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Dependence of mechanical properties on microstructure of high-textured pyrocarbon prepared via isothermal and thermal gradient chemical vapor infiltration
Tiyuan Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Investigation on the ablation performance and mechanism of HfC coating modified with TaC
Guanghui Feng et al.
CORROSION SCIENCE (2020)
Preparation of pore-controllable zirconium carbide ceramics with tunable mechanical strength, thermal conductivity and sound absorption coefficient
Ningning Yan et al.
CERAMICS INTERNATIONAL (2020)
Processing and characterization of robust carbon-carbon composites from inexpensive petroleum pitch without re-impregnation process
Shishobhan Sharma et al.
COMPOSITES PART B-ENGINEERING (2019)
Densification, microstructure, and mechanical properties of ZrC-SiC ceramics
Lun Feng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Influence of interface morphology of transition layer on the residual stresses of plasma sprayed ZrC-based coatings examined by finite element simulations
Ling-ling Xie et al.
CERAMICS INTERNATIONAL (2019)
Thermal properties of polymer-derived ceramic reinforced with boron nitride nanotubes
Yujun Jia et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Zirconium carbide-modified polymer-matrix composites with improved reflectivity under high-energy laser ablation
Chen Ma et al.
CERAMICS INTERNATIONAL (2019)
Strong ZrC ceramics at high temperatures with the addition of W
Yi-Bo Shen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Phase stability and mechanical properties of novel high entropy transition metal carbides
Tyler J. Harrington et al.
ACTA MATERIALIA (2019)
Carbon fiber reinforced silicon carbide composite-based sharp leading edges in high enthalpy plasma flows
Lei Luo et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of W content on the ablation properties of W-ZrC composites synthesized by reactive melt infiltration under oxyacetylene flame
Dong Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
In-situ homogeneous growth of ZrC nanowires on carbon cloth and their effects on flexural properties of carbon/carbon composites
Ningning Yan et al.
COMPOSITES PART B-ENGINEERING (2018)
In situ fabrication and characterization of laminated C/ZrC ceramic via filter papers and zirconia powders
Ling Li et al.
CERAMICS INTERNATIONAL (2017)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Ablation behaviour of C/C and C/C-ZrC-SiC composites with cone-shaped holes under an oxyacetylene flame
Lei Zhuang et al.
CORROSION SCIENCE (2016)
Freeze cast fabrication of porous ceramics using tert-butyl alcohol-water crystals as template
Yufei Tang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Effect of Cu on the ablation properties of Cf/ZrC composites fabricated by infiltrating Cf/C preforms with Zr-Cu alloys
Song Wang et al.
CERAMICS INTERNATIONAL (2015)
Ablation behavior and mechanism of SiC/Zr-Si-C multilayer coating for PIP-C/SiC composites under oxyacetylene torch flame
Xiang Yang et al.
COMPOSITES PART B-ENGINEERING (2015)
Periodically twinned 6H-SiC nanowires with fluctuating stems
Lu Li et al.
CERAMICS INTERNATIONAL (2014)
Ablation behavior and mechanism of C/ZrC, C/ZrC-SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process
Chunlei Yan et al.
CORROSION SCIENCE (2014)
Microstructure and ablation resistance of carbon/carbon composites with a zirconium carbide rich surface layer
Cuiyan Li et al.
CORROSION SCIENCE (2014)
Mechanism of ablation of 3D C/ZrC-SiC composite under an oxyacetylene flame
Si'an Chen et al.
CORROSION SCIENCE (2013)
Fabrication and microstructure of boron-doped isotropic pyrolytic carbon
Li Xu et al.
CARBON (2012)
Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M = V, Nb, and Ta) additions
Xin-Gang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Coefficients of thermal expansion of low texture and isotropic pyrocarbon deposited on stationary substrates
Dongsheng Zhang et al.
MATERIALS LETTERS (2012)
Densification behavior and microstructure of carbon/carbon composites prepared by chemical vapor infiltration from xylene at temperatures between 900 and 1250 °C
Hailiang Deng et al.
CARBON (2011)
Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment
Dan Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Microstructure and properties of W-ZrC composites prepared by the displacive compensation of porosity (DCP) method
Shouming Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives
Xin-Gang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Effect of in situ grown carbon nanotubes on the structure and mechanical properties of unidirectional carbon/carbon composites
Xiao Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The comparison of W/Cu and W/ZrC composites fabricated through hot-press
Mostafa Roosta et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
ZrC ablation protective coating for carbon/carbon composites
Sun Wei et al.
CARBON (2009)
Structural and elastic properties of ZrC under high pressure
Hongzhi Fu et al.
MATERIALS CHEMISTRY AND PHYSICS (2009)
Mechanical and ablation properties of 2D-carbon/carbon composites pre-infiltrated with a SiC filler
Sufang Tang et al.
CARBON (2006)
Resistance to ablation of pitch-derived ZrC/C composites
QF Tong et al.
CARBON (2004)
Influence of pressure, temperature and surface area/volume ratio on the texture of pyrolytic carbon deposited from methane
ZJ Hu et al.
CARBON (2003)
Electrical properties and thermal expansion of cordierite and cordierite-mullite materials
MA Camerucci et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Microstructural interpretation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites
D Cho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)