Related references
Note: Only part of the references are listed.Rheological parameters and building time of 3D printing sulphoaluminate cement paste modified by retarder and diatomite
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental research on magnesium phosphate cements modified by red mud
Yuantao Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effects of unreactive MgO and impurities in light burned MgO on the hydration process and performance of base magnesium sulfate cement
Xin Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effects of Rice Husk Silica on microstructure and mechanical properties of Magnesium-oxychloride Fiber Cement (MOFC)
Carlos Marmorato Gomes et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink
Xiaoyan Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
In situ monitoring of hydration of magnesium oxysulfate cement paste: Effect of MgO/MgSO4 ratio
Shengwen Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Particle bed 3D printing by selective cement activation - Applications, material and process technology
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2020)
Coordinated adjustment and optimization of setting time, flowability, and mechanical strength for construction 3D printing material derived from solid waste
Qamar Shahzad et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Research on the incorporation of untreated flue gas desulfurization gypsum into magnesium oxysulfate cement
Kang Gu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables
Zhijian Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of retarder on hydration properties of light-burned magnesia
Lei Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of printing parameters on interlayer bond strength of 3D printed limestone-calcined clay-based cementitious materials: An experimental and numerical study
Yu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effects of filler carbonates on magnesium-oxide based pastes
Carlos Marmorato Gomes et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Characterization of magnesium silicate hydrate (M-S-H)
Ellina Bernard et al.
CEMENT AND CONCRETE RESEARCH (2019)
An Overview of Study on Basic Magnesium Sulfate Cement and Concrete in China (2012-2019)
Xiangchao Zeng et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2019)
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Carbonation of magnesium oxysulfate cement and its influence on mechanical performance
Mingfang Ba et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Properties of magnesium phosphate cement containing steel slag powder
Yu Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Concrete material science: Past, present, and future innovations
Henri Van Damme
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Preparation of magnesium oxysulfate cement using magnesium-rich byproducts from the production of lithium carbonate from salt lakes
Wu Chengyou et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D printing of earth-based materials: Processing aspects
A. Perrot et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of fineness and components of CFBC ash on performance of basic magnesium sulfate cement
Xu Xun et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effects of sodium citrate and citric acid on the properties of magnesium oxysulfate cement
Nan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of ultra-sonic activation on early hydration process in 3D concrete printing technology
Vitoldas Vaitkevicius et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder
Yuan Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D printing of reinforced concrete elements: Technology and design approach
Domenico Asprone et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Recycling of raw rice husk to manufacture magnesium oxysulfate cement based lightweight building materials
Ling Qin et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Influence of supplementary cementitious materials on the performance and environmental impacts of reactive magnesia cement concrete
S. Ruan et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Environmental design guidelines for digital fabrication
Isolda Agusti-Juan et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Formation of magnesium silicate hydrates (M-S-H)
Ellina Bernard et al.
PHYSICS AND CHEMISTRY OF THE EARTH (2017)
Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars
Noura Khalil et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
The mechanical properties of magnesium oxysulfate cement enhanced with 517 phase magnesium oxysulfate whiskers
Tao Guo et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The hydration mechanism and performance of Modified magnesium oxysulfate cement by tartaric acid
Chengyou Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Sequestration of CO2 in reactive MgO cement-based mixes with enhanced hydration mechanisms
N. T. Dung et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
A critical review of the use of 3-D printing in the construction industry
Peng Wu et al.
AUTOMATION IN CONSTRUCTION (2016)
Magnesia-Based Cements: A Journey of 150 Years, and Cements for the Future?
Sam A. Walling et al.
CHEMICAL REVIEWS (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Effects of phosphoric acid and phosphates on magnesium oxysulfate cement
Chengyou Wu et al.
MATERIALS AND STRUCTURES (2015)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
Formation of magnesium silicate hydrate (M-S-H) cement pastes using sodium hexametaphosphate
Tingting Zhang et al.
CEMENT AND CONCRETE RESEARCH (2014)
Evaluation of novel reactive MgO activated slag binder for the immobilisation of lead and zinc
Fei Jin et al.
CHEMOSPHERE (2014)
Light-weight wood-magnesium oxychloride cement composite building products made by extrusion
Xiangming Zhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Development of low pH cement systems forming magnesium silicate hydrate (M-S-H)
Tingting Zhang et al.
CEMENT AND CONCRETE RESEARCH (2011)
Citric acid as anti-hydration additive for magnesia containing refractory castables
R. Salomao et al.
CERAMICS INTERNATIONAL (2011)
A novel approach for magnesia hydration assessment in refractory castables
Rafael Salomao et al.
CERAMICS INTERNATIONAL (2007)
Mechanism of setting reaction in magnesia-phosphate cements
E Soudée et al.
CEMENT AND CONCRETE RESEARCH (2000)