Related references
Note: Only part of the references are listed.Characteristics of pitting corrosion in an existing reinforced concrete beam exposed to marine environment
Yuxi Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Seismic behavior of composite interior joints of prefabricated H-shaped steel reinforced concrete column - steel beam
Chenglong Wu et al.
STRUCTURES (2020)
Steel-concrete interface influence on chloride threshold for corrosion - Empirical reinforcement to theory
Amit Kenny et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Development and testing of hybrid precast steel-reinforced concrete column-to- H shape steel beam connections under cyclic loading
Chenglong Wu et al.
ENGINEERING STRUCTURES (2020)
Cracking of cover concrete due to non-uniform corrosion of corner rebar: A 3D meso-scale study
Liu Jin et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Combined application of novel electromagnetic sensors and acoustic emission apparatus to monitor corrosion process of reinforced bars in concrete
Zhe Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Three-dimensional characteristics of steel corrosion and corrosion-induced cracks in magnesium oxychloride cement concrete monitored by X-ray computed tomography
Penghui Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of exposure environments and moisture content on water repellency of surface impregnation of cement-based materials
Jiuwen Bao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Localisation and characterisation of corrosion damage in reinforced concrete by means of acoustic emission and X-ray computed tomography
Charlotte Van Steen et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Measurement of fracture mechanics parameters of concrete containing fly ash thanks to use of Digital Image Correlation (DIC) method
Grzegorz Ludwik Golewski
MEASUREMENT (2019)
Application of a Novel Long-Gauge Fiber Bragg Grating Sensor for Corrosion Detection via a Two-level Strategy
Yuyao Cheng et al.
SENSORS (2019)
Use of a novel electro-magnetic apparatus to monitor corrosion of reinforced bar in concrete
Zhe Li et al.
SENSORS AND ACTUATORS A-PHYSICAL (2019)
A review on five key sensors for monitoring of concrete structures
Shima Taheri
CONSTRUCTION AND BUILDING MATERIALS (2019)
Monitoring fatigue cracks on eyebars of steel bridges using acoustic emission: A case study
Wael A. Megid et al.
ENGINEERING FRACTURE MECHANICS (2019)
Hybrid non-destructive evaluation methods for characterizing chloride induced corrosion in concrete
Phoebe T. W. Wong et al.
NDT & E INTERNATIONAL (2019)
Assessing the bond behaviour of corroded smooth and ribbed rebars with acoustic emission monitoring
Charlotte Van Steen et al.
CEMENT AND CONCRETE RESEARCH (2019)
Review on microwave nondestructive testing techniques and its applications in concrete technology
Abdul Wahab et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Flexural performance of reinforced concrete beams strengthened with fibre reinforced geopolymer concrete under accelerated corrosion
Mohammed Haloob Al-Majidi et al.
STRUCTURES (2019)
Durability, service life prediction, and modelling for reinforced concrete structures - review and critique
Mark Alexander et al.
CEMENT AND CONCRETE RESEARCH (2019)
Recognition and evaluation of corrosion profile via pulse-modulation eddy current inspection in conjunction with improved Canny algorithm
Bei Yan et al.
NDT & E INTERNATIONAL (2019)
Service Life Prediction of Reinforced Concrete in a Sea-Crossing Railway Bridge in Jiaozhou Bay: A Case Study
Zhe Li et al.
APPLIED SCIENCES-BASEL (2019)
Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover
Kaijian Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rebar corrosion detection, protection, and rehabilitation of reinforced concrete structures in coastal environments: A review
Amala James et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A novel method for assessing C-S-H chloride adsorption in cement pastes
Honglei Chang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Seismic behaviour of the corner joints of a frame under biaxial cyclic loading
Ben Mou et al.
ENGINEERING STRUCTURES (2019)
A critical review of corrosion development and rust removal techniques on the structural/environmental performance of corroded steel bridges
Shuaicheng Guo et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Corrosion detection in steel bar: A time-frequency approach
Subhra Majhi et al.
NDT & E INTERNATIONAL (2019)
Influence of Moisture Content on Electromagnetic Response of Concrete Studied Using a Homemade Apparatus
Zhe Li et al.
SENSORS (2019)
Investigation on novel embedded piezoelectric ultrasonic transducers for corrosion monitoring of reinforced concrete
Peng Liu et al.
SMART MATERIALS AND STRUCTURES (2019)
Flexural cracking-induced acoustic emission peak frequency shift in railway prestressed concrete sleepers
Rims Janeliukstis et al.
ENGINEERING STRUCTURES (2019)
Detection and assessment of pitting corrosion in rebars using scattering of ultrasonic guided waves
Rajeshwara Chary Sriramadasu et al.
NDT & E INTERNATIONAL (2019)
Monitoring invisible corrosion in concrete using a combination of wave propagation techniques
Ashutosh Sharma et al.
CEMENT & CONCRETE COMPOSITES (2018)
Visualized tracing of rebar corrosion evolution in concrete with x-ray micro-computed tomography method
Biqin Dong et al.
CEMENT & CONCRETE COMPOSITES (2018)
Application of neutron imaging to investigate fundamental aspects of durability of cement -based materials: A review
Peng Zhang et al.
CEMENT AND CONCRETE RESEARCH (2018)
Corrosion rate of carbon steel in carbonated concrete - A critical review
M. Stefanoni et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D visualized tracing of rebar corrosion-inhibiting features in concrete with a novel chemical self-healing system
Biqin Dong et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Time-varying relative displacement field on the surface of concrete cover caused by reinforcement corrosion based on DIC measurement
Jin Xianyu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Carbonation-induced corrosion: Investigation of the corrosion onset
Andres Belda Revert et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Investigation of deterioration in corroding reinforced concrete beams using active and passive techniques
Ashutosh Sharma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Simulation of a novel capacitive sensor for rebar corrosion detection
Yu Cheng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones
Jin Zuquan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials
Pengfei Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration
Khaled A. Alawi Al-Sodani et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Preparation of phytic acid conversion coating and corrosion protection performances for steel in chlorinated simulated concrete pore solution
Chuansheng Xiong et al.
CORROSION SCIENCE (2018)
A novel in-situ corrosion monitoring electrode for reinforced concrete structures
Karthick Subbiah et al.
ELECTROCHIMICA ACTA (2018)
A review of some advanced sensors used for health diagnosis of civil engineering structures
Swagato Das et al.
MEASUREMENT (2018)
A review of Ground Penetrating Radar application in civil engineering: A 30-year journey from Locating and Testing to Imaging and Diagnosis
Wallace Wai-Lok Lai et al.
NDT & E INTERNATIONAL (2018)
Quantitative Study on Corrosion of Steel Strands Based on Self-Magnetic Flux Leakage
Runchuan Xia et al.
SENSORS (2018)
Copper corrosion monitoring by electrical resistance probes in anoxic groundwater environment in the presence and absence of sulfate reducing bacteria
Maija Marja-aho et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
Monitoring uniform and localised corrosion by a radiofrequency sensing method
M. Yasri et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Characterization of damage in concrete beams under bending with Acoustic Emission Technique (AET)
Tam Nguyen-Tat et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Bond strength evaluation of corroded steel bars via the surface crack width induced by reinforcement corrosion
Hongwei Lin et al.
ENGINEERING STRUCTURES (2017)
Strain Field of Reinforced Concrete under Accelerated Corrosion by Digital Image Correlation Technique
Yudan Jiang et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2017)
Evaluation of the Durability and Performance of FBG-Based Sensors for Monitoring Moisture in an Aggressive Gaseous Waste Sewer Environment
Lourdes Shanika Malindi Alwis et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2017)
Simplified electrochemical potential noise method to predict corrosion and corrosion rate
Susan Caines et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2017)
Evaluation of chloride contamination in concrete using electromagnetic non-destructive testing methods
Xavier Derobert et al.
NDT & E INTERNATIONAL (2017)
Durability of concrete structures in tropical atoll environment
Hongfa Yu et al.
OCEAN ENGINEERING (2017)
Monitoring Concrete Deterioration Due to Reinforcement Corrosion by Integrating Acoustic Emission and FBG Strain Measurements
Weijie Li et al.
SENSORS (2017)
Fiber optic macro-bend based sensor for detection of metal loss
Weijie Li et al.
SMART MATERIALS AND STRUCTURES (2017)
Evaluation of multiple stress corrosion crack interactions by in-situ Digital Image Correlation
J. Bolivar et al.
CORROSION SCIENCE (2017)
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Jian Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Corrosion induced damage detection of in-service RC slabs using acoustic emission technique
Shilpa Patil et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography method
Biqin Dong et al.
CEMENT AND CONCRETE RESEARCH (2017)
Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique
Ahmad Zaki et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensors
Jinrui Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evaluation of the impact of corrosion of hot-dip galvanized reinforcement on bond strength with concrete - A review
Petr Pokorny et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Long-term monitoring of reinforcement corrosion in concrete using ground penetrating radar
Shuxian Hong et al.
CORROSION SCIENCE (2017)
Defect detection and location in switch rails by acoustic emission and Lamb wave analysis: A feasibility study
Jinrui Zhang et al.
APPLIED ACOUSTICS (2016)
Chloride-induced corrosion of steel in cracked concrete - Part I: Experimental studies under accelerated and natural marine environments
M. Otieno et al.
CEMENT AND CONCRETE RESEARCH (2016)
Chloride-induced corrosion of steel in cracked concrete-Part II: Corrosion rate prediction models
M. Otieno et al.
CEMENT AND CONCRETE RESEARCH (2016)
Interaction between compressive load and corrosive-ion attack on reinforced concrete with accelerated potentiostatic corrosion
Zuquan Jin et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
In-situ monitoring of pitting corrosion on vertically positioned 304 stainless steel by analyzing acoustic-emission energy parameter
Kaige Wu et al.
CORROSION SCIENCE (2016)
Detection of Inner Corrosion of Steel Construction Using Magnetic Resistance Sensor and Magnetic Spectroscopy Analysis
Keiji Tsukada et al.
IEEE TRANSACTIONS ON MAGNETICS (2016)
Corrosion Degree Effect on Nominal and Effective Strengths of Naturally Corroded Reinforcement
Carlos E. T. Balestra et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)
Investigation of pitting corrosion monitoring using field signature method
Fangji Gan et al.
MEASUREMENT (2016)
The Non-Destructive Test of Steel Corrosion in Reinforced Concrete Bridges Using a Micro-Magnetic Sensor
Hong Zhang et al.
SENSORS (2016)
Low frequency (LF) RFID sensors and selective transient feature extraction for corrosion characterisation
Ali Imam Sunny et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Fiber Bragg grating based sensing system: Early corrosion detection for structural health monitoring
C. H. Tan et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Influence of Rubber Size on Properties of Crumb Rubber Mortars
Yong Yu et al.
MATERIALS (2016)
Recent durability studies on concrete structure
S. W. Tang et al.
CEMENT AND CONCRETE RESEARCH (2015)
Monitoring setting and hardening of concrete by active acoustic method: Effects of water-to-cement ratio and pozzolanic materials
Jinrui Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Corrosion effects on the mechanical properties of reinforcing steel bars. Fatigue and σ-ε behavior
Ignasi Fernandez et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Proposal for an alternative operative method for determination of polarisation resistance for the quantitative evaluation of corrosion of reinforcing steel in concrete cooling towers
M. E. Mitzithra et al.
NUCLEAR ENGINEERING AND DESIGN (2015)
Monitoring the Corrosion Process of Reinforced Concrete Using BOTDA and FBG Sensors
Jianghong Mao et al.
SENSORS (2015)
Magnetic Sensors Based on Amorphous Ferromagnetic Materials: A Review
Carlos Moron et al.
SENSORS (2015)
Periodic mapping of reinforcement corrosion in intrusive chloride contaminated concrete with GPR
Shuxian Hong et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Electrochemical impedance behavior of mortar subjected to a sulfate environment - A comparison with chloride exposure models
Mariana O. G. P. Braganca et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Acoustic emission monitoring for assessment of prestressed concrete beams
Mohamed K. ElBatanouny et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Non-destructive methods for measuring chloride ingress into concrete: State-of-the-art and future challenges
M. Torres-Luque et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Atmospheric corrosion monitoring of a weathering steel under an electrolyte film in cyclic wet-dry condition
Ch. Thee et al.
CORROSION SCIENCE (2014)
Corrosion monitoring and materials selection for automotive environments by using Atmospheric Corrosion Monitor (ACM) sensor
Daisuke Mizuno et al.
CORROSION SCIENCE (2014)
Novel Sensor Design Using Photonic Crystal Fibres for Monitoring the Onset of Corrosion in Reinforced Concrete Structures
Colum McCague et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2014)
Corrosion mechanisms in reinforced concrete by acoustic emission
Yuma Kawasaki et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Chloride-induced corrosion of steel reinforcement - Mechanical performance and pit depth analysis
Charis A. Apostolopoulos et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Identification of corrosion mechanisms by univariate and multivariate statistical analysis during long term acoustic emission monitoring on a pre-stressed concrete beam
L. Calabrese et al.
CORROSION SCIENCE (2013)
Commissioning and Evaluation of a Fiber-Optic Sensor System for Bridge Monitoring
Richard H. Scott et al.
IEEE SENSORS JOURNAL (2013)
Magnetic Nondestructive Test for Resistance Spot Welds Using Magnetic Flux Penetration and Eddy Current Methods
Keiji Tsukada et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2013)
Corrosion monitoring of reinforced concrete beam using embedded cement-based piezoelectric sensor
Youyuan Lu et al.
MAGAZINE OF CONCRETE RESEARCH (2013)
Full-field 3D measurement using multi-camera digital image correlation system
Fanxiu Chen et al.
OPTICS AND LASERS IN ENGINEERING (2013)
Durability of steel reinforced concrete in chloride environments: An overview
Xianming Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
A study of the elastic moduli of corrosion products using nano-indentation techniques
Yuxi Zhao et al.
CORROSION SCIENCE (2012)
An accurately controllable imitative stress corrosion cracking for electromagnetic nondestructive testing and evaluations
Noritaka Yusa et al.
NUCLEAR ENGINEERING AND DESIGN (2012)
Acoustic emission during pitting corrosion of 304 stainless steel
Jian Xu et al.
CORROSION SCIENCE (2011)
Damage analysis and cracking model of reinforced concrete structures with rebar corrosion
Yuxi Zhao et al.
CORROSION SCIENCE (2011)
Detection and characterization of stress-corrosion cracking on 304 stainless steel by electrochemical noise and acoustic emission techniques
G. Du et al.
CORROSION SCIENCE (2011)
Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer
Yuxi Zhao et al.
CORROSION SCIENCE (2011)
Remote corrosion monitoring of the RC structures using the electrochemical wireless energy-harvesting sensors and networks
Guofu Qiao et al.
NDT & E INTERNATIONAL (2011)
Monitoring of corrosion in reinforced concrete structure using Bragg grating sensing
Junqi Gao et al.
NDT & E INTERNATIONAL (2011)
A magnetic flux leakage method using a magnetoresistive sensor for nondestructive evaluation of spot welds
Keiji Tsukada et al.
NDT & E INTERNATIONAL (2011)
Brillouin Corrosion Expansion Sensors for Steel Reinforced Concrete Structures Using a Fiber Optic Coil Winding Method
Xuefeng Zhao et al.
SENSORS (2011)
Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel
Jaka Kovac et al.
CORROSION SCIENCE (2010)
Pitting and uniform corrosion source recognition using acoustic emission parameters
C. Jirarungsatian et al.
CORROSION SCIENCE (2010)
Critical chloride content in reinforced concrete - A review
Ueli Angst et al.
CEMENT AND CONCRETE RESEARCH (2009)
Behaviour of RC beams corroded under sustained service loads
Goitseone Malumbela et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures
Gustavo S. Duffo et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Modeling corroded section configuration of steel bar in concrete structure
Yingshu Yuan et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Development of a magnetic sensor for detection and sizing of internal pipeline corrosion defects
N. B. S. Gloria et al.
NDT & E INTERNATIONAL (2009)
Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars
Lan Chung et al.
CEMENT & CONCRETE COMPOSITES (2008)
Corrosion of carbon steel influenced by anaerobic biofilm in natural seawater
Jizhou Duan et al.
ELECTROCHIMICA ACTA (2008)
A novel optical fiber sensor for steel corrosion in concrete structures
Christopher K. Y. Leung et al.
SENSORS (2008)
Assessment of the effect of microstructure on the magnetic behavior of structural carbon steels using an electromagnetic sensor
F. Rumiche et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
Study on source location using an acoustic emission system for various corrosion types
C. Jomdecha et al.
NDT & E INTERNATIONAL (2007)
Monitoring of steel corrosion in concrete by electrode arrays and electrical resistance probes
A. Legat
ELECTROCHIMICA ACTA (2007)
Interaction between sulfate and chloride solution attack of concretes with and without fly ash
Jin Zuquan et al.
CEMENT AND CONCRETE RESEARCH (2007)
Corrosion-induced bond strength degradation in reinforced concrete - Analytical and empirical models
Kapilesh Bhargava et al.
NUCLEAR ENGINEERING AND DESIGN (2007)
Analytical model for time to cover cracking in RC structures due to rebar corrosion
Kapilesh Bhargava et al.
NUCLEAR ENGINEERING AND DESIGN (2006)
Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment
O Poupard et al.
CEMENT AND CONCRETE RESEARCH (2006)
Detection and identification of concrete cracking during corrosion of reinforced concrete by acoustic emission coupled to the electrochemical techniques
B Assouli et al.
NDT & E INTERNATIONAL (2005)
Electromagnetic nondestructive testing of rust region in steel
Y Gotoh et al.
IEEE TRANSACTIONS ON MAGNETICS (2005)
In-situ X-ray diffraction of corrosion products formed on iron surfaces
Y Takahashi et al.
MATERIALS TRANSACTIONS (2005)
Sensor systems for use in reinforced concrete structures
WJ McCarter et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
The performance of a migrating corrosion inhibitor suitable for reinforced concrete
W Morris et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2003)
The application of electrochemical impedance spectroscopy to determine the long-term effectiveness of corrosion inhibitors for steel in concrete
L Dhouibi et al.
CEMENT & CONCRETE COMPOSITES (2002)
Macrocell sensor systems for monitoring of the corrosion risk of the reinforcement in concrete structures
M Raupach et al.
NDT & E INTERNATIONAL (2001)