Related references
Note: Only part of the references are listed.Model Update Based on Transient Measurements for Model Predictive Control and Hybrid Real-Time Optimization
Jose Eduardo W. Santos et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
Model Predictive Control Embedding a Parallel Hybrid Modeling Strategy
Debanjan Ghosh et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
Comparison of Modeling Methods for DoE-Based Holistic Upstream Process Characterization
Benjamin Bayer et al.
BIOTECHNOLOGY JOURNAL (2020)
Integrating production scheduling and process control using latent variable dynamic models
Calvin Tsay et al.
CONTROL ENGINEERING PRACTICE (2020)
A comprehensive hybrid first principles/machine learning modeling framework for complex industrial processes
Bei Sun et al.
JOURNAL OF PROCESS CONTROL (2020)
Modeling, Simulation, and Optimization 4.0 for a Distillation Column
Norbert Asprion
CHEMIE INGENIEUR TECHNIK (2020)
Process structure-based recurrent neural network modeling for model predictive control of nonlinear processes
Zhe Wu et al.
JOURNAL OF PROCESS CONTROL (2020)
Combining machine learning and process engineering physics towards enhanced accuracy and explainability of data-driven models
Timur Bikmukhametov et al.
COMPUTERS & CHEMICAL ENGINEERING (2020)
A hybrid framework for process monitoring: Enhancing data-driven methodologies with state and parameter estimation
Francesco Destro et al.
JOURNAL OF PROCESS CONTROL (2020)
Surrogate-model based MILP for the optimal design of ethylene production from shale gas
H. A. Pedrozo et al.
COMPUTERS & CHEMICAL ENGINEERING (2020)
A physics-informed Run-to-Run control framework for semiconductor manufacturing
Wei-Ting Yang et al.
EXPERT SYSTEMS WITH APPLICATIONS (2020)
Hybrid modeling of cross-flow filtration: Predicting the flux evolution and duration of ultrafiltration processes
Maximilian Krippl et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
First Principles Statistical Process Monitoring of High-Dimensional Industrial Microelectronics Assembly Processes
Tiago J. Rato et al.
PROCESSES (2020)
A hybrid modeling approach integrating first-principles knowledge with statistical methods for fault detection in HVAC systems
Hesam Hassanpour et al.
COMPUTERS & CHEMICAL ENGINEERING (2020)
Process monitoring and fault detection on a hot-melt extrusion process using in-line Raman spectroscopy and a hybrid soft sensor
Furqan Tahir et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
Optimal demand response scheduling of an industrial air separation unit using data-driven dynamic models
Calvin Tsay et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
A Dynamic Response Surface Model for Polymer Grade Transitions in Industrial Plants
Zhenyu Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Physics-informed neural networks: A deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations
M. Raissi et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2019)
Hybrid Modeling Approach Integrating First-Principles Models with Subspace Identification
Debanjan Ghosh et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Monitoring Chemical Processes Using Judicious Fusion of Multi-Rate Sensor Data
Zhenyu Wang et al.
SENSORS (2019)
Experimental Design for Batch-to-Batch Optimization under Model-Plant Mismatch
Rubin Hille et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
A data-driven approach for industrial utility systems optimization under uncertainty
Liang Zhao et al.
ENERGY (2019)
The promise of artificial intelligence in chemical engineering: Is it here, finally?
Venkat Venkatasubramanian
AICHE JOURNAL (2019)
Overview of Surrogate Modeling in Chemical Process Engineering
Kevin McBride et al.
CHEMIE INGENIEUR TECHNIK (2019)
Gray-Box Modeling for the Optimization of Chemical Processes
Norbert Asprion et al.
CHEMIE INGENIEUR TECHNIK (2019)
Hybrid data-driven physics-based model fusion framework for tool wear prediction
Houman Hanachi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Deterministic Global Optimization with Artificial Neural Networks Embedded
Artur M. Schweidtmann et al.
JOURNAL OF OPTIMIZATION THEORY AND APPLICATIONS (2019)
Economic nonlinear model predictive control using hybrid mechanistic data-driven models for optimal operation in real-time electricity markets: In-silico application to air separation processes
Pascal Schaefer et al.
JOURNAL OF PROCESS CONTROL (2019)
Reduced dynamic modeling approach for rectification columns based on compartmentalization and artificial neural networks
Pascal Schaefer et al.
AICHE JOURNAL (2019)
Assessing the Value of Information of Data-Centric Activities in the Chemical Processing Industry 4.0
Marco S. Reis et al.
AICHE JOURNAL (2018)
Knowledge-data-integrated sparse modeling for batch process monitoring
Lijia Luo et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Simultaneous identification and optimization of biochemical processes under model-plant mismatch using output uncertainty bounds
Rubin Hille et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Advances in surrogate based modeling, feasibility analysis, and optimization: A review
Atharv Bhosekar et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Optimal design of energy systems using constrained grey-box multi-objective optimization
Burcu Beykal et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
An efficient MILP framework for integrating nonlinear process dynamics and control in optimal production scheduling calculations
Morgan T. Kelley et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Global optimization of grey-box computational systems using surrogate functions and application to highly constrained oil-field operations
Burcu Beykal et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Building Optimal Multiresolution Soft Sensors for Continuous Processes
Tiago J. Rato et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Bayesian deep convolutional encoder-decoder networks for surrogate modeling and uncertainty quantification
Yinhao Zhu et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2018)
Which regression method to use? Making informed decisions in data-rich/knowledge poor scenarios - The Predictive Analytics Comparison framework (PAC)
Ricardo Rendall et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2018)
Detection of model-plant mismatch and model update for reaction systems using concept of extents
D. M. Darsha Kumar et al.
JOURNAL OF PROCESS CONTROL (2018)
Global optimization of general constrained grey-box models: new method and its application to constrained PDEs for pressure swing adsorption
Fani Boukouvala et al.
JOURNAL OF GLOBAL OPTIMIZATION (2017)
Moving horizon closed-loop production scheduling using dynamic process models
Richard C. Pattison et al.
AICHE JOURNAL (2017)
ARGONAUT: AlgoRithms for Global Optimization of coNstrAined grey-box compUTational problems
Fani Boukouvala et al.
OPTIMIZATION LETTERS (2017)
Theory-Guided Data Science: A New Paradigm for Scientific Discovery from Data
Anuj Karpatne et al.
IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING (2017)
Machine learning of linear differential equations using Gaussian processes
Maziar Raissi et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2017)
Development of an ontology-driven, component based framework for the implementation of adaptiveness in a Jellyfish-type simulation model
Gabor Bohacs et al.
JOURNAL OF AMBIENT INTELLIGENCE AND SMART ENVIRONMENTS (2017)
Industrial Process Monitoring in the Big Data/Industry 4.0 Era: From Detection, to Diagnosis, to Prognosis
Marco S. Reis et al.
PROCESSES (2017)
A superstructure-based design of experiments framework for simultaneous domain-restricted model identification and parameter estimation
Calvin Tsay et al.
COMPUTERS & CHEMICAL ENGINEERING (2017)
Process Design and Control Optimization: A Simultaneous Approach by Multi-Parametric Programming
Nikolaos A. Diangelakis et al.
AICHE JOURNAL (2017)
The ALAMO approach to machine learning
Zachary T. Wilson et al.
COMPUTERS & CHEMICAL ENGINEERING (2017)
Robust batch-to-batch optimization in the presence of model-plant mismatch and input uncertainty
Rubin Hille et al.
AICHE JOURNAL (2017)
Between the Poles of Data-Driven and Mechanistic Modeling for Process Operation
Doerte Solle et al.
CHEMIE INGENIEUR TECHNIK (2017)
A generic hybrid model development for process analysis of industrial fixed-bed catalytic reactors
Abbas Azarpour et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)
Data-driven construction of Convex Region Surrogate models
Qi Zhang et al.
OPTIMIZATION AND ENGINEERING (2016)
Towards the integration of process design, control and scheduling: Are we getting closer?
Efstratios N. Pistikopoulos et al.
COMPUTERS & CHEMICAL ENGINEERING (2016)
Real-time optimization of an industrial steam-methane reformer under distributed sensing
Ankur Kumar et al.
CONTROL ENGINEERING PRACTICE (2016)
Optimal Process Operations in Fast-Changing Electricity Markets: Framework for Scheduling with Low-Order Dynamic Models and an Air Separation Application
Richard C. Pattison et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Linking Models and Experiments
D. Bonvin et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Constrained Smoothing of Experimental Data in the Identification of Kinetic Models
Carolina S. Vertis et al.
26TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING (ESCAPE), PT B (2016)
Moving Horizon Scheduling of an Air Separation Unit under Fast-Changing Energy Prices
Richard Pattison et al.
IFAC PAPERSONLINE (2016)
A novel adaptive surrogate modeling-based algorithm for simultaneous optimization of sequential batch process scheduling and dynamic operations
Hanyu Shi et al.
AICHE JOURNAL (2015)
Integrated production scheduling and model predictive control of continuous processes
Michael Baldea et al.
AICHE JOURNAL (2015)
A combined first-principles and data-driven approach to model building
Alison Cozad et al.
COMPUTERS & CHEMICAL ENGINEERING (2015)
Model-based experimental screening for DOC parameter estimation
Bjorn Lundberg et al.
COMPUTERS & CHEMICAL ENGINEERING (2015)
Smart Manufacturing Approach for Efficient Operation of Industrial Steam-Methane Reformers
Ankur Kumar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Optimization-based assessment of design limitations to air separation plant agility in demand response scenarios
Yanan Cao et al.
JOURNAL OF PROCESS CONTROL (2015)
Diagnosis of multiple and unknown faults using the causal map and multivariate statistics
Leo H. Chiang et al.
JOURNAL OF PROCESS CONTROL (2015)
Deep learning in neural networks: An overview
Juergen Schmidhuber
NEURAL NETWORKS (2015)
Multirate multisensor data fusion for linear systems using Kalman filters and a neural network
Sajjad Safari et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2014)
Learning surrogate models for simulation-based optimization
Alison Cozad et al.
AICHE JOURNAL (2014)
Process Data Analytics in the Era of Big Data
S. Joe Qin
AICHE JOURNAL (2014)
Principal component analysis
Rasmus Bro et al.
ANALYTICAL METHODS (2014)
Hybrid semi-parametric modeling in process systems engineering: Past, present and future
Moritz von Stosch et al.
COMPUTERS & CHEMICAL ENGINEERING (2014)
Adaptive sequential sampling for surrogate model generation with artificial neural networks
John Eason et al.
COMPUTERS & CHEMICAL ENGINEERING (2014)
Root cause analysis in multivariate statistical process monitoring: Integrating reconstruction-based multivariate contribution analysis with fuzzy-signed directed graphs
Bo He et al.
COMPUTERS & CHEMICAL ENGINEERING (2014)
Integrated Planning, Scheduling, and Dynamic Optimization for Batch Processes: MINLP Model Formulation and Efficient Solution Methods via Surrogate Modeling
Yunfei Chu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
A Methodology to Diagnose Process/Model Mismatch in First-Principles Models
Natascia Meneghetti et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Identification of Hammerstein-Wiener models
Adrian Wills et al.
AUTOMATICA (2013)
Statistical root cause analysis of novel faults based on digraph models
Yiming Wan et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)
Improvements in surrogate models for process synthesis. Application to water network system design
J. E. A. Graciano et al.
COMPUTERS & CHEMICAL ENGINEERING (2013)
A Bayesian regularized artificial neural network for stock market forecasting
Jonathan L. Ticknor
EXPERT SYSTEMS WITH APPLICATIONS (2013)
Design of Dynamic Experiments: A Data-Driven Methodology for the Optimization of Time-Varying Processes
Christos Georgakis
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Bridging groundwater models and decision support with a Bayesian network
Michael N. Fienen et al.
WATER RESOURCES RESEARCH (2013)
Surrogate-Based Optimization of Expensive Flowsheet Modeling for Continuous Pharmaceutical Manufacturing
Fani Boukouvala et al.
JOURNAL OF PHARMACEUTICAL INNOVATION (2013)
Process synthesis of biodiesel production plant using artificial neural networks as the surrogate models
Ismail Fahmi et al.
COMPUTERS & CHEMICAL ENGINEERING (2012)
Feasibility analysis of black-box processes using an adaptive sampling Kriging-based method
Fani Boukouvala et al.
COMPUTERS & CHEMICAL ENGINEERING (2012)
General Framework for Latent Variable Model Inversion for the Design and Manufacturing of New Products
Emanuele Tomba et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Surrogate-Based Superstructure Optimization Framework
Carlos A. Henao et al.
AICHE JOURNAL (2011)
Hybrid metabolic flux analysis: combining stoichiometric and statistical constraints to model the formation of complex recombinant products
Nuno Carinhas et al.
BMC SYSTEMS BIOLOGY (2011)
Identification of semi-parametric hybrid process models
Aidong Yang et al.
COMPUTERS & CHEMICAL ENGINEERING (2011)
A novel identification method for hybrid (N)PLS dynamical systems with application to bioprocesses
M. von Stosch et al.
EXPERT SYSTEMS WITH APPLICATIONS (2011)
Hybrid modeling of penicillin fermentation process based on least square support vector machine
Xianfang Wang et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2010)
A comparison of nine PLS1 algorithms
Martin Andersson
JOURNAL OF CHEMOMETRICS (2009)
MCCORMICK-BASED RELAXATIONS OF ALGORITHMS
Alexander Mitsos et al.
SIAM JOURNAL ON OPTIMIZATION (2009)
Experimental design for the identification of hybrid reaction models from transient data
Marc Brendel et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Incremental identification of hybrid process models
O. Kahrs et al.
COMPUTERS & CHEMICAL ENGINEERING (2008)
Fault diagnosis of the paper machine short circulation process using novel dynamic causal digraph reasoning
Hui Cheng et al.
JOURNAL OF PROCESS CONTROL (2008)
A grey-box modeling approach for the reduction of nonlinear systems
Reinout Romijn et al.
JOURNAL OF PROCESS CONTROL (2008)
DT-optimum designs for model discrimination and parameter estimation
A. C. Atkinson
JOURNAL OF STATISTICAL PLANNING AND INFERENCE (2008)
The validity domain of hybrid models and its application in process optimization
O. Kahrs et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2007)
A semi-mechanistic model building framework based on selective and localized model extensions
Pedro V. Lima et al.
COMPUTERS & CHEMICAL ENGINEERING (2007)
Bayesian regularization neural networks for optimizing fluid flow processes
K Hirschen et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)
Application of spectrofluorometry to the prediction of PHB concentrations in a fed-batch process
D Henneke et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2005)
Statistical batch process monitoring using gray models
ENM Van Sprang et al.
AICHE JOURNAL (2005)
Parallel hybrid modeling methods for a full-scale cokes wastewater treatment plant
DS Lee et al.
JOURNAL OF BIOTECHNOLOGY (2005)
Hybrid process models for process optimisation, monitoring and control
V Galvanauskas et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2004)
Combining first principles with black-box techniques for reaction systems
LB Chen et al.
CONTROL ENGINEERING PRACTICE (2004)
Combining first principles modelling and artificial neural networks: a general framework
R Oliveira
COMPUTERS & CHEMICAL ENGINEERING (2004)
Feedback linearization of discrete-time nonlinear uncertain plants via first-principles-based serial neuro-gray-box models
A Bazaei et al.
JOURNAL OF PROCESS CONTROL (2003)
Using hybrid neural networks in scaling up an FCC model from a pilot plant to an industrial unit
GM Bollas et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2003)
Knowledge-based hybrid modelling of a batch crystallisation when accounting for nucleation, growth and agglomeration phenomena
P Georgieva et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Combining prior knowledge with data driven modeling of a batch distillation column including start-up
PF van Lith et al.
COMPUTERS & CHEMICAL ENGINEERING (2003)
Hybrid models combining mechanistic models with adaptive regression splines and local stepwise regression
BPM Duarte et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2003)
Grey box modelling for model predictive control of a heating process
B Sohlberg
JOURNAL OF PROCESS CONTROL (2003)
Grey-box model identification via evolutionary computing
KC Tan et al.
CONTROL ENGINEERING PRACTICE (2002)
Compound and other optimum designs for systems of nonlinear differential equations arising in chemical kinetics
AC Atkinson et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2002)
Grey-box modelling and control of chemical processes
Q Xiong et al.
CHEMICAL ENGINEERING SCIENCE (2002)
Improved monitoring of batch processes by incorporating external information
HJ Ramaker et al.
JOURNAL OF PROCESS CONTROL (2002)
Designing robust optimal dynamic experiments
SP Asprey et al.
JOURNAL OF PROCESS CONTROL (2002)
Comparative studies of metamodelling techniques under multiple modelling criteria
R Jin et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2001)
Modeling and optimal control of a batch polymerization reactor using a hybrid stacked recurrent neural network model
Y Tian et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
One hundred years of the design of experiments on and off the pages of Biometrika
AC Atkinson et al.
BIOMETRIKA (2001)
A nonlinear industrial model predictive controller using integrated PLS and neural net state-space model
H Zhao et al.
CONTROL ENGINEERING PRACTICE (2001)
Statistical tools for optimal dynamic model building
SP Asprey et al.
COMPUTERS & CHEMICAL ENGINEERING (2000)
Statistical and causal model-based approaches to fault detection and isolation
S Yoon et al.
AICHE JOURNAL (2000)
Share Paper
