Harvesting freshwater algae with tannins from the bark of forest species: Comparison of methods and pelletization of the biomass obtained

Toxic cyanobacteria growth rates have increased in recent decades due to climate change and human activities. Microalgae, with their ability to produce a large amount of biomass, are considered as a source of energy that can be used to produce biofuels. The aim of this study is to test four different microalgae harvesting methods (sedimentation, coagulation-flocculation, pH variation, and centrifugation) in order to find which is best suited to the A Baxe reservoir, which has been suffering from cyanobacterial blooms in recent years. Centrifugation proved the most efficient method (85.74%-1790 RCF), but it can induce cell rupture. Natural sedimentation and pH variation obtained similar results at 49.36% and 49.02% respectively. Although all four methods have advantages, our results reveal that coagulation-flocculation, using 10 mg/L of Pinus pinaster, results in a removal efficiency of 68.10%, making it the most suitable method, though with 20 mg/L the performance was lower (66.03%). To minimise environmental waste, the microalgae removed were then transformed into pellets to be used as biofuel, with a higher heating value (HHV) of 21,196.96 +/- 1602.33 kJ/kg. The pellets obtained from the microalgae residue did not meet all the requirements for use as biofuels, but microalgae biomass could be mixed with other sources and therefore looks like a promising option for the future. (C) 2020 Elsevier Ltd. All rights reserved.

Automated summary

After comparing four different microalgae harvesting methods, it was found that coagulation-flocculation using Pinus pinaster achieved the highest removal efficiency, suitable for reducing the impact of toxic cyanobacteria on the A Baxe reservoir. Transforming the removed microalgae into pellets for use as biofuel shows promising potential for future development.