4.5 Article

Numerical study on flame shape transition and structure characteristic of premixed CH4/H2-air in the micro-planar combustor

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Numerical study of an integrated miniature ejector for catalytic micro-combustors

Guangyao Yang et al.

Summary: This study proposed an integrated micro-ejector for providing a mixture of n-butane and air to micro-combustors. The effects of fuel jet velocity and geometrical parameters of the ejector on the entrainment ratio were numerically investigated. The findings suggest that increasing the nozzle diameter leads to a sharp decrease in the entrainment ratio, while increasing the diameter of the mixing section can drastically augment the entrainment ratio. Additionally, increasing the total area of air inlets gives rise to a drastic decrease in the entrainment ratio, showing the importance of optimizing these design parameters for micro-ejectors.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Review Energy & Fuels

Recent progress in flame stabilization technologies for combustion-based micro energy and power systems

Jianlong Wan et al.

Summary: This article discusses the development and classification of flame stabilization technologies in micro-combustors, including single flame stabilization technologies, combined flame stabilization technologies, and other technologies. Progress made in the past decade is summarized, along with a discussion on the underlying mechanisms of these flame anchoring strategies.
Article Chemistry, Applied

Enhancing heat transfer performance analyses of a hydrogen-fueled meso-combustor with staggered bluff-bodies

Tao Cai et al.

Summary: This study aims to improve the energy conversion efficiency of a thermo-photo-voltaic system by optimizing combustor performance through the use of staggered bluff-bodies. The implementation of staggered bluff-bodies significantly enhances heat transfer performance and increases mean wall temperature. Results also show that the equivalence ratio and dimensions of the staggered bluff-bodies have a significant impact on system performance.

FUEL PROCESSING TECHNOLOGY (2021)

Article Green & Sustainable Science & Technology

Evaluation of NOx emissions characteristics in a CO2-Free micro-power system by implementing a perforated plate

Tao Cai et al.

Summary: Ammonia, as a carbon-free fuel with high hydrogen content, has potential applications in transportation, propulsion, and power generation sectors. However, direct combustion of ammonia leads to high NOx emission, which needs to be mitigated. Factors such as plate porosity, thickness, distance, and inlet pressure play important roles in reducing NO formation.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Energy & Fuels

Investigation on premixed methane/air combustion characteristics in heat recirculation micro combustor with separating cylinder

Ziqiang He et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)

Article Energy & Fuels

The effects of aspect ratio on CH4/air flame stability in rectangular mesoscale combustors

Zili Yuan et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Article Energy & Fuels

Experimental investigation on non-premixed CH4/air combustion in a novel miniature Swiss-roll combustor

Shixuan Wang et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)

Article Chemistry, Physical

Numerical study of blended fuel natural gas-hydrogen combustion in rich/quench/lean combustor of a micro gas turbine

Sidahmed Meziane et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Energy & Fuels

Entropy generation analysis of combustion process adopting blended propane/hydrogen fuels in micro-combustor

Qiuhan Huang et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2019)

Article Energy & Fuels

Enhancement of hydrogen combustion efficiency by helium dilution in a micro-combustor with wall cavities

Aiwu Fan et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)

Article Chemistry, Physical

Micro-combustor performance enhancement by hydrogen addition in a combined baffle-bluff configuration

E. Amani et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Chemistry, Physical

A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor

Aikun Tang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Thermodynamics

Development of micro-thermophotovoltaic power generator with heat recuperation

W. M. Yang et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Chemistry, Physical

A computational study on the combustion of hydrogen/methane blended fuels for a micro gas turbines

Hsin-Yi Shih et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Energy & Fuels

Stability of lean combustion in mini-scale porous media combustor with heat recuperation

Kan Xu et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)

Review Thermodynamics

Microscale combustion: Technology development and fundamental research

Yiguang Ju et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)

Article Energy & Fuels

Porous media combustion for micro thermophotovoltaic system applications

S. K. Chou et al.

APPLIED ENERGY (2010)

Article Thermodynamics

Dynamics of premixed flames in a narrow channel with a step-wise wall temperature

Vadim N. Kurdyumov et al.

COMBUSTION AND FLAME (2009)

Review Thermodynamics

Flame dynamics

Moshe Matalon

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Article Thermodynamics

Dynamics of premixed hydrogen/air flames in microchannels

Gianmarco Pizza et al.

COMBUSTION AND FLAME (2008)

Article Thermodynamics

Experimental study of spinning combustion in a mesoscale divergent channel

Bo Xu et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Article Thermodynamics

Numerical modeling of non-adiabatic heat-recirculating combustors

C. H. Kuo et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)

Article Thermodynamics

Characteristics of combustion in a narrow channel with a temperature gradient

K Maruta et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)

Article Thermodynamics

A CFD study of propane/air microflame stability

DG Norton et al.

COMBUSTION AND FLAME (2004)

Article Thermodynamics

The effect of simplified transport modeling on the burning velocity of laminar premixed flames

H Bongers et al.

COMBUSTION SCIENCE AND TECHNOLOGY (2003)

Article Thermodynamics

Analysis of non-adiabatic heat-recirculating combustors

PD Ronney

COMBUSTION AND FLAME (2003)

Article Thermodynamics

Micropower generation using combustion: Issues and approaches

AC Fernandez-Pello

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)