Related references
Note: Only part of the references are listed.Synergetic effects of surface texturing and solid lubricants to tailor friction and wear - A review
Andreas Rosenkranz et al.
TRIBOLOGY INTERNATIONAL (2021)
Strengthening of novel TiC-AlN ceramic with in-situ synthesized Ti3Al intermetallic compound
Mehdi Fattahi et al.
CERAMICS INTERNATIONAL (2020)
Ultrasonic-assisted preparation of complex-shaped ceramic cutting tools by microwave sintering
Dongbo Hong et al.
CERAMICS INTERNATIONAL (2020)
The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Antonella Rizzo et al.
MATERIALS (2020)
Preparation of nano - coating powder CaF2@Al(OH)3 and its application in Al2O3/Ti(C,N) self-lubricating ceramic tool materials
Lianggang Ji et al.
CERAMICS INTERNATIONAL (2020)
Development and preliminary process design of beta-SiAlONs by the spark plasma sintering process
John Letwaba et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Spark plasma sintering of TiN ceramics codoped with SiC and CNT
Seyed Ali Delbari et al.
CERAMICS INTERNATIONAL (2019)
Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC
Abbas Sabahi Namini et al.
CERAMICS INTERNATIONAL (2019)
Influence of CaF2@Al2O3 on the friction and wear properties of Al2O3/Ti (C,N)/CaF2@Al2O3 self-lubricating ceramic tool
Zhaoqiang Chen et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Microstructure-mechanical properties correlation in spark plasma sintered Ti-4.8 wt.% TiB2 composites
Abbas Sabahi Namini et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Mechanical properties and microstructure of Al2O3/Ti(C,N)/CaF2@Al2O3 self-lubricating ceramic tool
Zhaoqiang Chen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
High temperature solid-lubricating materials: A review
Shengyu Zhu et al.
TRIBOLOGY INTERNATIONAL (2019)
Study on secondary cutting phenomenon of micro-textured self-lubricating ceramic cutting tools with different morphology parameters formed via in situ forming of Al2O3-TiC
Yihua Feng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Reactive spark plasma sintering of TiB2-SiC-TiN novel composite
Mehdi Shahedi Asl et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Design and Development of Hybrid Al2O3 Based Composites with Toughening and Self-Lubricating Second-Phase Inclusions
Syed Sohail Akhtar et al.
MATERIALS (2019)
Microstructure and mechanical properties of 5.8 GHz microwave-sintered ZrO2/Al2O3 ceramics
Lorena Gil-Flores et al.
CERAMICS INTERNATIONAL (2019)
Preparation of Al2O3/Ti(C,N)/ZrO2/CaF2@Al(OH)3 Ceramic Tools and Cutting Performance in Turning
Zhaoqiang Chen et al.
MATERIALS (2019)
Synthesis of CaF2 Nanoparticles Coated by SiO2 for Improved Al2O3/TiC Self-Lubricating Ceramic Composites
Zhaoqiang Chen et al.
NANOMATERIALS (2019)
Structure design of Al2O3/TiC/CaF2 multicomponent gradient self-lubricating ceramic composite and its tribological behaviors
Guangyong Wu et al.
CERAMICS INTERNATIONAL (2018)
Graphene nanosheets toughened TiB2-based ceramic tool material by spark plasma sintering
Zengbin Yin et al.
CERAMICS INTERNATIONAL (2018)
Tribological performance of alumina matrix composites reinforced with nickel-coated graphene
J. Wozniak et al.
CERAMICS INTERNATIONAL (2018)
Microstructural development during spark plasma sintering of ZrB2-SiC-Ti composite
Ehsan Ghasali et al.
CERAMICS INTERNATIONAL (2018)
Mechanical properties and microstructure of Al2O3/TiC based self-lubricating ceramic tool with CaF2@Al (HO)3
Zhaoqiang Chen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
An advanced self-lubricating ceramic composite with the addition of core-shell structured h-BN@Ni powders
Guangyong Wu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Al2O3-coated h-BN composite powders and as-prepared Si3N4-based self-lubricating ceramic cutting tool material
Wenliang Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
High toughness integrated with self-lubricity of Cu-doped Sialon ceramics at elevated temperature
Qichun Sun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications
H. Torres et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Effect of metal phases on microstructure and mechanical properties of Si3N4-based ceramic tool materials by microwave sintering
Weiwei Xu et al.
CERAMICS INTERNATIONAL (2018)
Design and development of ceramic-based composites with tailored properties for cutting tool inserts
Taha Waqar et al.
CERAMICS INTERNATIONAL (2018)
Spark plasma sintering of TiAl-Ti3AlC2 composite
Maryam Akhlaghi et al.
CERAMICS INTERNATIONAL (2018)
The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood
Xiaolei Guo et al.
ADVANCES IN APPLIED CERAMICS (2018)
New materials through a variety of sintering methods
L. Jaworska et al.
E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS (2018)
Longer-lasting Al2O3-SiCw-TiC cutting tools obtained by spark plasma sintering
Carlos F. Gutierrez-Gonzalez et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2017)
Fabrication techniques and cutting performance of micro-textured self-lubricating ceramic cutting tools by in-situ forming of Al2O3-TiC
Yihua Feng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Self-lubricating mechanisms via the in situ formed tribo-film of sintered ceramics with hBN addition in a high humidity environment
Wei Chen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: The effects on microstructure and properties
Hanisah Manshor et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Dry sliding wear behavior of β-Sialon ceramics at wide range temperature from 25 to 800 °C
Qichun Sun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Novel Approach to the Fabrication of an Alumina-MoS2 Self-Lubricating Composite via the In Situ Synthesis of Nanosized MoS2
Yunfeng Su et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
High-performance coatings for cutting tools
Kirsten Bobzin
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
Mechanical properties of graphene oxide reinforced alumina matrix composites
Tomasz Cygan et al.
CERAMICS INTERNATIONAL (2017)
Effect of TiB2 content on the characteristics of spark plasma sintered Ti-TiBw composites
Abbas Sabahi Namini et al.
ADVANCED POWDER TECHNOLOGY (2017)
Tribological behaviour of Si3N4-hBN ceramic materials against metal with different sliding speeds
Xu Ai et al.
CERAMICS INTERNATIONAL (2016)
Investigation of Al2O3/TiC ceramic cutting tool materials with the addition of SiC-coated h-BN: preparation, mechanical properties, microstructure and wear resistance
Hui Chen et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2016)
Self-lubricating ceramic cutting tool material with the addition of nickel coated CaF2 solid lubricant powders
Guangyong Wu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Experimental study on the cutting performance of microwave sintered Al2O3/TiC ceramic tool in the machining of hardened steel
Yu Cheng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Influence of hot-press sintering parameters on microstructures and mechanical properties of h-BN ceramics
Xiaoming Duan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Al2O3-cBN composites sintered by SPS and HPHT methods
P. Klimczyk et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications
K. A. Bello et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2016)
Spark plasma sintering (SPS) - an advanced sintering technique for structural nanocomposite materials
W. R. Matizamhuka
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2016)
(Ag,Cu)-Ta-O Ternaries As High-Temperature Solid-Lubricant Coatings
Hongyu Gao et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Effect of hBN content on the friction and wear characteristics of B4C-hBN ceramic composites under dry sliding condition
Xiuqing Li et al.
CERAMICS INTERNATIONAL (2015)
Al2O3-V cutting tools for machining hardened stainless steel
K. Broniszewski et al.
CERAMICS INTERNATIONAL (2015)
Functionalization of Carbon Nanofibres Obtained by Floating Catalyst Method
Adolfo Fernandez et al.
JOURNAL OF NANOMATERIALS (2015)
Friction behavior of alumina/molybdenum composites and formation of MoO3-x phase at 400 °C
M. E. Cura et al.
TRIBOLOGY INTERNATIONAL (2015)
High-Temperature Tribological Performance of TiAl Matrix Composites Reinforced by Multilayer Graphene
Zengshi Xu et al.
TRIBOLOGY LETTERS (2015)
Effect of Temperature on Tribological Properties and Wear Mechanisms of NiAl Matrix Self-Lubricating Composites Containing Graphene Nanoplatelets
Yecheng Xiao et al.
TRIBOLOGY TRANSACTIONS (2015)
Tribological Properties of TiAl Matrix Self-Lubricating Composites Containing Multilayer Graphene and Ti3SiC2 at High Temperatures
Zengshi Xu et al.
TRIBOLOGY TRANSACTIONS (2015)
Fabrication and high-temperature tribological properties of self-lubricating NiCr-BaMoO4 Composites
Jia-Hu Ouyang et al.
WEAR (2015)
Carbon-based solid-liquid lubricating coatings for space applications-A review
Xiaoqiang Fan et al.
FRICTION (2015)
Preparation of Al2O3/TiC micro-composite ceramic tool materials by microwave sintering and their microstructure and properties
Yu Cheng et al.
CERAMICS INTERNATIONAL (2014)
Mechanical properties and microstructural evolution of alumina zirconia nanocompo sites by microwave sintering
R. Benavente et al.
CERAMICS INTERNATIONAL (2014)
Finite element design and fabrication of Al2O3/TiC/CaF2 gradient self-lubricating ceramic tool material
Chonghai Xu et al.
CERAMICS INTERNATIONAL (2014)
Microwave Technique: A Powerful Tool for Sintering Ceramic Materials
A. Borrell et al.
CURRENT NANOSCIENCE (2014)
Al2O3/(W,Ti)C/CaF2 multi-component graded self-lubricating ceramic cutting tool material
C. H. Xu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel
Youqiang Xing et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Microwave versus conventional sintering: Estimate of the apparent activation energy for densification of α-alumina and zinc oxide
Fei Zuo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Effect of CuO on self-lubricating properties of ZrO2(Y2O3)-Mo composites at high temperatures
Lingqian Kong et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Graphene: a new emerging lubricant
Diana Berman et al.
MATERIALS TODAY (2014)
Preparation of nickel-coated graphite by electroless plating under mechanical or ultrasonic agitation
X. Xu et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Hard coatings with high temperature adaptive lubrication and contact thermal management: review
A. A. Voevodin et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Lubricious oxide coatings for extreme temperature applications: A review
S. M. Aouadi et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Effect of Sliding Speed and Applied Load on Dry Sliding Tribological Performance of TiAl Matrix Self-lubricating Composites
Zengshi Xu et al.
TRIBOLOGY LETTERS (2014)
Tribofilm Formation As a Result of Complex Interaction at the Tool/Chip Interface during Cutting
German S. Fox-Rabinovich et al.
LUBRICANTS (2014)
Effect of three types of surfactants on fabrication of Cu-coated graphite powders
Li Chen et al.
ADVANCED POWDER TECHNOLOGY (2013)
Review of graphene-ceramic matrix composites
H. Porwal et al.
ADVANCES IN APPLIED CERAMICS (2013)
Solid lubricants: a review
T. W. Scharf et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Effects of the Susceptor Dielectric Properties on the Microwave Sintering of Alumina
Romain Heuguet et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Prediction of fracture toughness of ceramic composites as function of microstructure: I. Numerical simulations
Yan Li et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: A review
Robert Franz et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Friction and Wear Behaviors of Ni-based Composites Containing Graphite/Ag2MoO4 Lubricants
Eryong Liu et al.
TRIBOLOGY LETTERS (2013)
Friction and wear properties of hot-pressed NiCr-BaCr2O4 high temperature self-lubricating composites
Jia-Hu Ouyang et al.
WEAR (2013)
Modelling of a thin soft layer on a self-lubricating ceramic composite
Mandiar Valefi et al.
WEAR (2013)
Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800 °C
Xiaoliang Shi et al.
WEAR (2013)
Cutting with coated tools: Coating technologies, characterization methods and performance optimization
Konstantinos-Dionysios Bouzakis et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
A comparison of sintering techniques using different particle sized β-SiAlON powders
Onur Eser et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Effect of temperature on friction and wear behaviour of CuO-zirconia composites
Mahdiar Valefi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior
German S. Fox-Rabinovich et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2012)
Tribological Properties of Adaptive Ni-Based Composites with Addition of Lubricious Ag2MoO4 at Elevated Temperatures
Er-yong Liu et al.
TRIBOLOGY LETTERS (2012)
Friction and wear behaviors of Sialon-Si3N4 graded nano-composite ceramic materials in sliding wear tests and in cutting processes
Guangming Zheng et al.
WEAR (2012)
Development of Al2O3/TiC/CaF2 Graded Self-lubricating Ceramic Cutting Tool Materials
Guangyong Wu et al.
HIGH SPEED MACHINING V (2012)
Semiconducting hexagonal boron nitride for deep ultraviolet photonics
S. Majety et al.
QUANTUM SENSING AND NANOPHOTONIC DEVICES IX (2012)
Spark plasma sintering of alumina: Study of parameters, formal sintering analysis and hypotheses on the mechanism(s) involved in densification and grain growth
J. Gurt Santanach et al.
ACTA MATERIALIA (2011)
Review on self-lubricant transition metal dichalcogenide nanocomposite coatings alloyed with carbon
T. Polcar et al.
SURFACE & COATINGS TECHNOLOGY (2011)
A Study on Mechanical and Tribological Properties of Hot pressed Al2O3/ZrO2/h-BN/TiO2 Composites
Hyun Hwi Lee et al.
ECO-MATERIALS PROCESSING AND DESIGN XII (2011)
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Morteza Oghbaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Microwave sintering of β-SiAlON-ZrO2 composites
Sreekumar Chockalingam et al.
MATERIALS & DESIGN (2010)
Processing and characterization of an Al2O3/WC/TiC micro- nano-composite ceramic tool material
Jun Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Comparative Evaluation of Spark Plasma (SPS), Microwave (MWS), Two stage sintering (TSS) and Conventional Sintering (CRH) on the densification and Micro structural Evolution of fully Stabilized Zirconia Ceramics
K. Rajeswari et al.
SCIENCE OF SINTERING (2010)
Layered atomic structures of double oxides for low shear strength at high temperatures
D. Stone et al.
SCRIPTA MATERIALIA (2010)
On the role of copper in brake friction materials
W. Oesterle et al.
TRIBOLOGY INTERNATIONAL (2010)
A mechanical model for surface layer formation on self-lubricating ceramic composites
Jiupeng Song et al.
WEAR (2010)
Lubrication behavior of Y-TZP/Al2O3/Mo nanocomposites at high temperature
Yong-Sheng Zhang et al.
WEAR (2010)
Tribological characteristics of Si3N4-hBN ceramic materials sliding against stainless steel without lubrication
Wei Chen et al.
WEAR (2010)
Preparation of Ni-coated Si3N4 powders via electroless plating method
Jinhui Dai et al.
CERAMICS INTERNATIONAL (2009)
Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders
M. Amirjan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Optimizing the ignition behavior of microwave-combustion synthesized Al2O3/TiC composite using Taguchi robust design method
G. Golkar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Tribological investigation of adaptive Mo2N/MoS2/Ag coatings with high sulfur content
S. M. Aouadi et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Microstructure and tribological properties of ZrO2(Y2O3) matrix composites doped with different solid lubricants from room temperature to 800°C
J. H. Ouyang et al.
WEAR (2009)
Dry sliding up to 7.5 m/s and 800 °C of thermally sprayed coatings of the TiO2-Cr2O3 system and (Ti,Mo)(C,N)-Ni(Co)
L. -M. Berger et al.
WEAR (2009)
Net shaping nanopowders with powerful ultrasonic action and methods of density distribution control
O. L. Khasanov et al.
ADVANCES IN APPLIED CERAMICS (2008)
Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating
L. Ning et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Microwave sintering of alumina-zirconia nanocomposites
R. R. Menezes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
An in situ mechanism for self-replenishing powder transfer films: Experiments and modeling
C. F. Higgs et al.
WEAR (2008)
Tribofilms: aspects of formation, stability and removal
Ardian Morina et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Effect of Al2O3 particle size on the mechanical properties of alumina-based ceramics
Xinying Teng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Wear modeling and the third body concept
N. Fillot et al.
WEAR (2007)
Self-lubrication of Al2O3/TiC/CaF2 ceramic composites in sliding wear tests and in machining processes
Deng Jianxin et al.
MATERIALS & DESIGN (2007)
Self-lubricating mechanisms via the in situ formed tribofilm of sintered ceramics with CaF2 additions when sliding against hardened steel
Deng Jianxin et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2007)
Molybdenum disulfide as a lubricant and catalyst in adaptive nanocomposite coatings
C. Muratore et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Magneli phase formation of PVD Mo-N and W-N coatings
G. Gassner et al.
SURFACE & COATINGS TECHNOLOGY (2006)
High-temperature tribological behavior of Cr′N-Ag self-lubricating coatings
Kerstin Kutschej et al.
ADVANCED ENGINEERING MATERIALS (2006)
Thin films Of MoO3-Ag2O binary oxides -: the high temperature lubricants
Witold Gulbinski et al.
WEAR (2006)
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
ZA Munir et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Influence of the SiC grain size on the wear behaviour of Al2O3/SiC composites
M Belmonte et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
A crystal chemical approach to the formulation of self-lubricating nanocomposite coatings
A Erdemir
SURFACE & COATINGS TECHNOLOGY (2005)
Relation of certain quantum chemical parameters to lubrication behavior of solid oxides
A Erdemir et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2005)
The role of surface oxidation in friction processes on molybdenum nitride thin films
T Suszko et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Spark plasma sintering of SM2O3-doped aluminum nitride
KA Khor et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Tribological properties of spark-plasma-sintered ZrO2(Y2O3)-CaF2-Ag composites at elevated temperatures
JH Ouyang et al.
WEAR (2005)
Environmental effects on friction and wear of dry sliding zirconia and alumina ceramics doped with copper oxide
HR Pasaribu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2005)
Microstructure and mechanical properties of hot-pressed Al2O3/TiC ceramic composites with the additions of solid lubricants
JX Deng et al.
CERAMICS INTERNATIONAL (2005)
Micromechanical simulation of dynamic fracture using the cohesive finite element method
J Zhai et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2004)
Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings
PH Mayrhofer et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Solid lubricant coatings: recent developments and future trends
C Donnet et al.
TRIBOLOGY LETTERS (2004)
Wear behaviour of single phase and composite sialon ceramics stabilized with Y2O3 and Lu2O3
MI Jones et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Electrochemical characteristics of silver- and nickel-coated synthetic graphite prepared by a gas suspension spray coating method for the anode of lithium secondary batteries
WC Choi et al.
ELECTROCHIMICA ACTA (2004)
Preparation and characterization of coated nanoscale Cu/SiCP composite particles
Z Rui et al.
CERAMICS INTERNATIONAL (2004)
Ignition behavior and characteristics of microwave-combustion synthesized Al2O3-TiC powders
D Atong et al.
CERAMICS INTERNATIONAL (2004)
Effect of aluminum-alloy composition on self-lubrication of frictional surfaces
NA Bushe et al.
WEAR (2003)
Friction reduction by adding copper oxide into alumina and zirconia ceramics
HR Pasaribu et al.
WEAR (2003)
Effect of the electrical discharge machining on strength and reliability of TiN/Si3N4 composites
CC Liu et al.
CERAMICS INTERNATIONAL (2003)
A study of the SiC-L composite ceramics for self-lubrication
KZ Sang et al.
WEAR (2002)
Tribological behaviour of Si3N4-BN ceramic materials for dry sliding applications
JM Carrapichano et al.
WEAR (2002)
Diamond-like amorphous carbon
J Robertson
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)
The friction and wear characteristics of low-pressure plasma-sprayed ZrO2-BaCrO4 composite coating at elevated temperatures
JH Ouyang et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Influence of tungsten carbide particles on resistance of alumina matrix ceramics to thermal shock
L Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Mechanical properties and tribology of Si3N4-TiB2 ceramic composites produced by hot pressing and hot isostatic pressing
AH Jones et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Second phases and material transfer in alumina ceramics sliding systems
A Tucci et al.
WEAR (2000)
Tribological characteristics of Si3N4-based self-lubricating materials
L Tuchinskiy et al.
TRIBOLOGY TRANSACTIONS (2000)