Related references
Note: Only part of the references are listed.Enhancing the performance of low molar ratio urea-formaldehyde resin adhesives via in-situ modification with intercalated nanoclay
Muhammad Adly Rahandi Lubis et al.
JOURNAL OF ADHESION (2021)
Effects of nanoclay modification with transition metal ion on the performance of urea-formaldehyde resin adhesives
Sumit Manohar Yadav et al.
POLYMER BULLETIN (2021)
Reduction of energy consumption of green plywood production by implementing high-efficiency thermal conductive bio-adhesive: Assessment from pilot-scaled application
Zhong Wang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Functionality of Beech Bark in Adhesive Mixtures Used in Plywood and Its Effect on the Stability Associated with Material Systems
Roman Reh et al.
MATERIALS (2019)
Dialdehyde Cellulose as a Bio-Based Robust Adhesive for Wood Bonding
Hua Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Further Exploration of Sucrose-Citric Acid Adhesive: Synthesis and Application on Plywood
Shijing Sun et al.
POLYMERS (2019)
Further Exploration of Sucrose-Citric Acid Adhesive: Investigation of Optimal Hot-Pressing Conditions for Plywood and Curing Behavior
Zhongyuan Zhao et al.
POLYMERS (2019)
Effect of Citric Acid Content and Extractives Treatment on the Manufacturing Process and Properties of Citric Acid-bonded Salacca Frond Particleboard
Ragil Widyorini et al.
BIORESOURCES (2019)
Effects of recycled fiber content on the properties of medium density fiberboard
Muhammad Adly Rahandi Lubis et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2018)
Formaldehyde-free particleboards using natural latex as the polymeric binder
Erika Yukari Nakanishi et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Reactions with Wood Carbohydrates and Lignin of Citric Acid as a Bond Promoter of Wood Veneer Panels
Claudio Del Menezzi et al.
POLYMERS (2018)
Modification of urea-formaldehyde resin adhesives with oxidized starch using blocked pMDI for plywood
Muhammad Adly Rahandi Lubis et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2018)
The potential use of wood waste ash nanofiller for improvement of laminated veneer lumber production made from Jabon (Anthocephalus cadamba)
Sutrisno et al.
JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2018)
Improving characteristics of melamine-urea-formaldehyde resin by addition of blocked polyurethane prepolymer
Jun Jiang et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2017)
Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard II: influences of pressing temperature and time on particleboard properties
Sukma Surya Kusumah et al.
JOURNAL OF WOOD SCIENCE (2017)
Bonding Ability of a New Adhesive Composed of Citric Acid-Sucrose for Particleboard
Ragil Widyorini et al.
BioResources (2016)
Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard I: Effects of pre-drying treatment and citric acid content on the board properties
Sukma S. Kusumah et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Preparation of tannin-formaldehyde-furfural resin with pretreatment of depolymerization of condensed tannin and ring opening of furfural
Zhao Yi et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2016)
Xylan - A green binder for wood adhesives
Emelie Norstrom et al.
EUROPEAN POLYMER JOURNAL (2015)
Development of Wood-Based Materials Bonded with Citric Acid
Kenji Umemura et al.
FOREST PRODUCTS JOURNAL (2015)
Lathe check characteristics of fast growing sengon veneers and their effect on LVL glue-bond and bending strength
Wayan Darmawan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
The quality of 8 and 10 years old samama wood (Anthocephalus macrophyllus)
Tekat Dwi Cahyono et al.
JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2015)
Investigation of Low Mole Ratio UF and UMF Resins Aimed at Lowering the Formaldehyde Emission Potential of Wood Composite Boards
An Mao et al.
BioResources (2014)
Effects of Hot-Pressing Parameters on Shear Strength of Plywood Bonded with Modified Soy Protein Adhesives
Hongyan Li et al.
BioResources (2014)
Citric acid crosslinking of paper products for improved high-humidity performance
Petri Widsten et al.
CARBOHYDRATE POLYMERS (2014)
Properties of Modified Phenol-Formaldehyde Adhesive for Plywood Panels Manufactured from High Moisture Content Veneer
Pavlo Bekhta et al.
DRVNA INDUSTRIJA (2014)
Chitosan as an adhesive
Narimane Mati-Baouche et al.
EUROPEAN POLYMER JOURNAL (2014)
Lignin in straw and its applications as an adhesive
Seyed Hamidreza Ghaffar et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Physical and mechanical properties of methyl methacrylate impregnated jabon wood
Y. S. Hadi et al.
JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2013)
On the formaldehyde release of wood particles
E. Roffael et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)
Formaldehyde emission monitoring from a variety of solid wood, plywood, blockboard and flooring products manufactured for building and furnishing materials
Martin Boehm et al.
JOURNAL OF HAZARDOUS MATERIALS (2012)
Qualitative and quantitative analysis of wood samples by Fourier transform infrared spectroscopy and multivariate analysis
Huilun Chen et al.
CARBOHYDRATE POLYMERS (2010)