Related references
Note: Only part of the references are listed.Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy
Navneet Khanna et al.
TRIBOLOGY INTERNATIONAL (2020)
Nonedible vegetable oil-based cutting fluids for machining processes - a review
Rahul Katna et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Toward sustainable micro-drilling of Inconel 718 superalloy using MQL-Nanofluid
K. Khanafer et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Effect of LN2 and CO2 coolants in milling of 55NiCrMoV7 steel
M. Jebaraj et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Experimental investigation and sustainability assessment to evaluate environmentally clean machining of 15-5 PH stainless steel
Navneet Khanna et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
CO2 cryogenic milling of Inconel 718: cutting forces and tool wear
Octavio Pereira et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques
Prassan Shah et al.
TRIBOLOGY INTERNATIONAL (2020)
Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions
Djordje Vukelic et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Evaluating the sustainability pillars of energy and environment considering carbon emissions under machining of Ti-3Al-2.5 V
Rupinder Singh et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2020)
Development of a Sustainability Assessment Algorithm and Its Validation Using Case Studies on Cryogenic Machining
Prathamesh Bhat et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
Machining behavior of Inconel 718 superalloy: Effects of cutting speed and depth of cut
Jadam Thrinadh et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Process performance and life cycle assessment of friction drilling on dual-phase steel
O. Pereira et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Hybrid Composite-Metal Stack Drilling with Different Minimum Quantity Lubrication Levels
J. Fernandez-Perez et al.
MATERIALS (2019)
Resource efficiency analysis of lubricating strategies for machining processes using life cycle assessment methodology
Alessio Campitelli et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The life cycle greenhouse gas emission benefits from alternative uses of biofuel coproducts
Nafisa Mahbub et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2019)
Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy
Munish Kumar Gupta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
The Influence of Manufacturing Plant Site Selection on Environmental Impact of Machining Processes
Nitesh Sihag et al.
26TH CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (LCE) (2019)
Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy
Alborz Shokrani et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
Environmental modelling of aluminium based components manufacturing routes: Additive manufacturing versus machining versus forming
Giuseppe Ingarao et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement
W. Grzesik et al.
TRIBOLOGY INTERNATIONAL (2018)
An Investigation of the Effect of Parameters and Chip Slenderness Ratio on Drilling Process Quality of AISI 1050 Steel
Zulkuf Demir et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills
Necati Ucak et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
An experimental investigation of the effects of point angle on the high-speed steel drills performance in drilling
Zulkuf Demir
MEASUREMENT & CONTROL (2018)
Investigation of cryogenic cooling effect in reaming Ti-6AL-4V alloy
L. Shakeel Ahmed et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance
O. Pereira et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Nozzle Design for Combined Use of MQL and Cryogenic Gas in Machining
Octavio Pereira et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy
R. Polvorosa et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Investigation of the influence of CO2 cryogenic coolant application on tool wear
Nikolaos Tapoglou et al.
MANUFACTURING SYSTEMS 4.0 (2017)
Cryogenic manufacturing processes
I. S. Jawahir et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 718
Ekrem Oezkaya et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304
O. Pereira et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Influence of coolant flow rate on tool life and wear development in cryogenic and wet milling of Ti-6Al-4V
M. Ibrahim Sadik et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Surface roughness and energy consumption analysis of conventional and peck drilling approaches
Salman Pervaiz et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Thermo-mechanical effects in drilling using metal working fluids and cryogenic cooling and their impact in tool performance
J. C. Outeiro et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2015)
Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
Muhammad Imran et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Sustainable machining of high temperature Nickel alloy - Inconel 718: part 1 - predictive performance models
Franci Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2014)
The Influence of Cryogenic Coolants in Machining of Ti-6Al-4V
B. Dilip Jerold et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
Y. Kaynak et al.
WEAR (2013)
Experimental comparison of carbon-dioxide and liquid nitrogen cryogenic coolants in turning of AISI 1045 steel
B. Dilip Jerold et al.
CRYOGENICS (2012)
Life cycle assessment (LCA) applied to the process industry: a review
Leslie Jacquemin et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2012)
AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION
Erween A. Rahim et al.
MACHINING SCIENCE AND TECHNOLOGY (2011)
Macro-level environmental comparison of near-dry machining and flood machining
Domnita Fratila
JOURNAL OF CLEANER PRODUCTION (2010)
Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718
Abhay Bhatt et al.
TRIBOLOGY INTERNATIONAL (2010)
Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel
M. Anthony Xavior et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of Machining Parameters and Cutting Edge Geometry on Surface Integrity when Drilling and Hole Making in Inconel 718
Ali Akhavan Farid et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2009)
Tool life and surface integrity aspects when drilling and hole making in Inconel 718
A. R. C. Sharman et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Investigation on tool life and surface integrity when drilling Ti-6Al-4V and Ti-5Al-4V-Mo/Fe
Erween Abd. Rahim et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2006)
Study on wear mechanisms in drilling of Inconel 718 superalloy
YC Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Share Paper
