Related references
Note: Only part of the references are listed.Microstructure evolution and mechanical property characterization of a nickel-based superalloy at the mesoscopic scale
Qiang Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructure-strength relationship of ultrafine-grained titanium manufactured by unconventional severe plastic deformation process
Daniel Wojtas et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Influence of crystal structure on size dependent deformation behavior and strain heterogeneity in micro-scale deformation
X. F. Tang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Effects of cooling rate and strain rate on phase transformation, microstructure and mechanical behaviour of thermomechanically processed pearlitic steel
Indrajit Dey et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Fracture behavior of twin induced ultra-fine grained ZK61 magnesium alloy under high strain rate compression
Abdul Malik et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
The combined effects of grain and sample sizes on the mechanical properties and fracture modes of gold microwires
H. K. Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures
L. J. Wu et al.
APPLIED SURFACE SCIENCE (2018)
High strain-rate behavior and deformation mechanism of a multi-layer composite textured AZ31B Mg alloy plate
Weigui Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
High temperature tensile fracture characteristics of the oriented TiB whisker reinforced TA15 matrix composites fabricated by pre-sintering and canned extrusion
Yangju Feng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of plastic anisotropy on microscale ductile fracture and microformability of stainless steel foil
B. Meng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning
Qinmeng Luan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Grain Size Effect of Commercial Pure Titanium Foils on Mechanical Properties, Fracture Behaviors and Constitutive Models
Nie Daming et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Influences of size effect and stress condition on ductile fracture behavior in micro-scaled plastic deformation
J. L. Wang et al.
MATERIALS & DESIGN (2017)
A review of geometrical and microstructural size effects in micro-scale deformation processing of metallic alloy components
M. W. Fu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
A unified model for coupling constitutive behavior and micro-defects evolution of aluminum alloys under high-strain-rate deformation
Siliang Yan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
The effects of reducing specimen thickness on mechanical behavior of cryo-rolled ultrafine-grained copper
J. An et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Tensile behaviour of aluminium 7017 alloy at various temperatures and strain rates
Ravindranadh Bobbili et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Distinguishing micro-scale from macro-scale tensile flow stress of sheet metals in microforming
Daw-Kwei Leu
MATERIALS & DESIGN (2015)
Size effect on deformation behavior and ductile fracture in microforming of pure copper sheets considering free surface roughening
B. Meng et al.
MATERIALS & DESIGN (2015)
Size effects on tensile strength of aluminum-bronze alloy at room temperature
F. Chen et al.
MATERIALS & DESIGN (2015)
Variant selection during secondary and tertiary twinning in pure titanium
Hong Qin et al.
ACTA MATERIALIA (2014)
Ductile fracture and free surface roughening behaviors of pure copper foils for micro/meso-scale forming
Tsuyoshi Furushima et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Experimental study of macro-micro dynamic behaviors of 5A0X aluminum alloys in high velocity deformation
S. L. Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects
F. Sun et al.
ACTA MATERIALIA (2013)
A review on the state-of-the-art microforming technologies
M. W. Fu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
The influence of sample thickness on the tensile properties of pure Cu with different grain sizes
L. Yang et al.
SCRIPTA MATERIALIA (2013)
Mechanism of twinning-induced plasticity in β-type Ti-15Mo alloy
Xiaohua Min et al.
SCRIPTA MATERIALIA (2013)
A constitutive model for modeling of the deformation behavior in microforming with a consideration of grain boundary strengthening
J. G. Liu et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Studies of the interactive effect of specimen and grain sizes on the plastic deformation behavior in microforming
W. L. Chan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Blanking clearance and grain size effects on micro deformation behavior and fracture in micro-blanking of brass foil
Jie Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
{1 1 (2)over-bar 4} deformation twinning in pure Ti during dynamic plastic deformation
Feng Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Sensitivity of deformation twinning to grain size in titanium and magnesium
Alireza Ghaderi et al.
ACTA MATERIALIA (2011)
Deformation behaviour of commercially pure titanium at extreme strain rates
N. P. Gurao et al.
ACTA MATERIALIA (2011)
Geometry and grain size effects on the fracture behavior of sheet metal in micro-scale plastic deformation
M. W. Fu et al.
MATERIALS & DESIGN (2011)
Experimental and simulation study of deformation behavior in micro-compound extrusion process
W. L. Chan et al.
MATERIALS & DESIGN (2011)
Size effect on material surface deformation behavior in micro-forming process
J. H. Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Julia R. Greer et al.
PROGRESS IN MATERIALS SCIENCE (2011)
A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Modeling of grain size effect on micro deformation behavior in micro-forming of pure copper
W. L. Chan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
On the origin of the stress decrease for nickel polycrystals with few grains across the thickness
C. Keller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Investigation of size effects on material behavior of thin sheet metals using hydraulic bulge testing at micro/meso-scales
Sasawat Mahabunphachai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Modeling of the size effects on the behavior of metals in microscale deformation processes
Gap-Yong Kim et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
High strain rate tensile testing of automotive aluminum alloy sheet
R Smerd et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)
Microforming - from basic research to its realization
U Engel et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
The onset of twinning in metals:: A constitutive description
MA Meyers et al.
ACTA MATERIALIA (2001)
Microforming
M Geiger et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)