Artificial Cathode-Electrolyte Interphase towards High-Performance Lithium-Ion Batteries: A Case Study of β-AgVO3

Silver vanadates (SVOs) have been widely investigated as cathode materials for high-performance lithium-ion batteries (LIBs). However, similar to most vanadium-based materials, SVOs suffer from structural collapse/amorphization and vanadium dissolution from the electrode into the electrolyte during the Li insertion and extraction process, causing poor electrochemical performance in LIBs. We employ ultrathin Al2O3 coatings to modify beta-AgVO3 (as a typical example of SVOs) by an atomic layer deposition (ALD) technique. The galvanostatic charge-discharge test reveals that ALD Al2O3 coatings with different thicknesses greatly affected the cycling performance. Especially, the beta-AgVO3 electrode with similar to 10 nm Al2O3 coating (100 ALD cycles) exhibits a high specific capacity of 271 mAh g(-1), and capacity retention is 31%, much higher than the uncoated one of 10% after 100 cycles. The Coulombic efficiency is improved from 89.8% for the pristine beta-AgVO3 to 98.2% for Al2O3-coated one. Postcycling analysis by cyclic voltammetry (CV), cyclic voltammetry (EIS), and scanning electron microscopy (SEM) disclose that 10-nm Al2O3 coating greatly reduces cathode-electrolyte interphase (CEI) resistance and the charge transfer resistance in the beta-AgVO3 electrode. Al2O3 coating by the ALD method is a promising technique to construct artificial CEI and stabilize the structure of SVOs, providing new insights for vanadium-based electrodes and their energy storage devices.

Automated summary

The use of atomic layer deposition (ALD) technique to apply ultrathin Al2O3 coatings on silver vanadates (SVOs) has been shown to greatly improve their electrochemical performance and stability, increasing cycle life and specific capacity.