4.6 Article

The Hydration, Mechanical, Autogenous Shrinkage, Durability, and Sustainability Properties of Cement-Limestone-Slag Ternary Composites

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Experimental studies on hydration-strength-durability of limestone-cement-calcined Hwangtoh clay ternary composite

Run-Sheng Lin et al.

Summary: This study presents multiple experimental studies on the hydration, strength, and durability properties of ternary or binary composites incorporating calcined Hwangtoh clay and limestone powder. The experimental results indicate that the ternary composite with a 15% replacement level provides the most optimal mixture, and a 30% replacement level is the threshold level for achieving a similar strength as plain concrete. The study also shows a linear relationship between strength and combined water, as well as the synergic relation between calcined clay and limestone in the ternary composite.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions

Zongyun Mo et al.

Summary: This study found that steam curing significantly enhances the early compressive strength of UHPC matrix, but restrains late strength growth. Higher curing temperature facilitates a higher reaction degree of MK with cement, but decreases cement hydration degree. In terms of pore structure, the influence of steam curing on MK mixture is not significant.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material

Miao Ren et al.

Summary: The novel MPCM-UHPC composite material exhibits excellent thermal performance and mechanical properties, but the incorporation of MPCM has a negative effect on the mechanical properties and autogenous shrinkage of the material.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Effect of carbonation curing on sulfate resistance of cement-coal gangue paste

Ling Qin et al.

Summary: The paper investigated the effect of carbonation curing on sulfate attack resistance of cement-coal gangue (PC-CG) pastes, showing that accelerated carbonation can improve compressive strength, alleviate strength loss, and reduce expansion, leading to better durability of cement-based materials in sulfate attack regions.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Internal curing effect of saturated recycled fine aggregates in early-age mortar

Zhen Li et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Investigation of the effect of the coal wastes on the mechanical properties of the cement-treated sandy soil

Mobina Taslimi Paein Afrakoti et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Utilization of limestone powder as an activator for early-age strength improvement of slag concrete

Chenzhi Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Chemistry, Multidisciplinary

Effect of Nano-Silica on the Autogenous Shrinkage, Strength, and Hydration Heat of Ultra-High Strength Concrete

Guang-Zhu Zhang et al.

APPLIED SCIENCES-BASEL (2020)

Article Construction & Building Technology

Influence of Barchip fiber on early-age autogenous shrinkage of high strength concrete

Dejian Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement

Kemal Celik et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Self-compacting concretes using fly ash and fine limestone powder: Shrinkage and surface electrical resistivity of equivalent mortars

A. Duran-Herrera et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Autogenous shrinkage of alkali activated slag mortars: Basic mechanisms and mitigation methods

Darshan Ballekere Kumarappa et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Effect of sulfate additions on hydration and performance of ternary slag-limestone composite cements

Samuel Adu-Amankwah et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Construction & Building Technology

A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures

Dehui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Carbon dioxide reduction potential in the global cement industry by 2050

Sabbie A. Miller et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Concrete Defects Sizing by Means of Ultrasonic Velocity Maps

Giovanna Concu et al.

BUILDINGS (2018)

Review Materials Science, Multidisciplinary

Electrical Resistivity of Concrete for Durability Evaluation: A Review

Pejman Azarsa et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

Article Construction & Building Technology

Assessment of pore structure evolution in the limestone calcined clay cementitious system and its implications for performance

Yuvaraj Dhandapani et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Construction & Building Technology

Influence of limestone on the hydration of ternary slag cements

Samuel Adu-Amankwah et al.

CEMENT AND CONCRETE RESEARCH (2017)

Review Construction & Building Technology

Autogenous shrinkage of high performance concrete: A review

Linmei Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Interaction of silicate and aluminate reaction in a synthetic cement system: Implications for the process of alite hydration

S. T. Bergold et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Limestone addition effects on concrete porosity

Abdurrahman A. Elgalhud et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Ternary blends containing slag and interground/blended limestone: Hydration, strength, and pore structure

Aashay Arora et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete

Ehsan Ghafari et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder

Axel Schoeler et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Construction & Building Technology

Advances in understanding hydration of Portland cement

Karen L. Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete

Prasanna K. Acharya et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Ceramics

Elucidating the Role of the Aluminous Source on Limestone Reactivity in Cementitious Materials

Guillermo Puerta-Falla et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

A study on hydration, compressive strength, and porosity of Portland-limestone cement mixes containing SCMs

Amir Mohammad Ramezanianpour et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times

Jiong Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Limestone fillers cement based composites: Effects of blast furnace slags on fresh and hardened properties

Luc Courard et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Early-age deformation and autogenous cracking risk of slag-limestone filler-cement blended binders

Marwen Bouasker et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Thermodynamics

A comparison of early hydration properties of cement-steel slag binder and cement-limestone powder binder

Peiyu Yan et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)

Article Construction & Building Technology

Interactions between alite and C3A-gypsum hydrations in model cements

Alexandra Quennoz et al.

CEMENT AND CONCRETE RESEARCH (2013)

Article Construction & Building Technology

Synergy between fly ash and limestone powder in ternary cements

K. De Weerdt et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Construction & Building Technology

Effect of autogenous deformation on the cracking risk of slag cement concretes

Aveline Darquennes et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Construction & Building Technology

Supplementary cementitious materials

Barbara Lothenbach et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Construction & Building Technology

Compressive strength and shrinkage of mortar containing various amounts of mineral additions

Ahmed Itim et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

Effect of mineral filler type on autogenous shrinkage of self-compacting concrete

B. Craeye et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures

Yue Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Construction & Building Technology

Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques

Rikard Ylmen et al.

CEMENT AND CONCRETE RESEARCH (2009)

Article Construction & Building Technology

Influence of limestone on the hydration of Portland cements

Barbara Lothenbach et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Construction & Building Technology

Autogenous deformations of cement pastes Part II. W/C effects, micro-macro correlations, and threshold values

V Baroghel-Bouny et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Strength optimization of tailor-made cement with limestone filler and blast furnace slag

MF Carrasco et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete

R Demirboga et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Construction & Building Technology

The chemical composition and microstructure of hydration products in blended cements

JI Escalante-Garcia et al.

CEMENT & CONCRETE COMPOSITES (2004)

Article Construction & Building Technology

Strength development of ternary blended cement with limestone filler and blast-furnace slag

G Menendez et al.

CEMENT & CONCRETE COMPOSITES (2003)

Article Construction & Building Technology

Evidences of chemical interaction between EVA and hydrating Portland cement

DA Silva et al.

CEMENT AND CONCRETE RESEARCH (2002)