Related references
Note: Only part of the references are listed.Lightweight materials equal lightweight greenhouse gas emissions?: A historical analysis of greenhouse gases of vehicle material substitution
Kotaro Kawajiri et al.
JOURNAL OF CLEANER PRODUCTION (2020)
MANUFACTURING OF COMPOSITE MATERIALS WITH HIGH ENVIRONMENTAL EFFICIENCY USING EPOXY RESIN OF RENEWABLE ORIGIN AND PERMEABLE LIGHT CORES FOR VACUUM-ASSISTED INFUSION MOLDING
Diego Lascano et al.
INGENIUS-REVISTA DE CIENCIA Y TECNOLOGIA (2020)
A review on the extraction of pineapple, sisal and abaca fibers and their use as reinforcement in polymer matrix
S. Radoor et al.
EXPRESS POLYMER LETTERS (2020)
A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization
M. R. Sanjay et al.
CARBOHYDRATE POLYMERS (2019)
Fast processing and continuous simulation of automotive structural composite components
Frank Henning et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Maleinized Linseed Oil as Epoxy Resin Hardener for Composites with High Bio Content Obtained from Linen Byproducts
Vicent Fombuena et al.
POLYMERS (2019)
Flax (Linum usitatissimum L.) fibre reinforced polymer composite materials: A review on preparation, properties and prospects
M. Ramesh
PROGRESS IN MATERIALS SCIENCE (2019)
Epoxidized linseed oils based networks. Case of thermal degradation
Emmanuel Richaud et al.
POLYMER DEGRADATION AND STABILITY (2019)
Bio-Based Epoxy Resins Based on Linseed Oil Cured with Naturally Occurring Acids
Kerstin Thiele et al.
POLYMERS (2019)
Reactive toughening of injection-molded polylactide pieces using maleinized hemp seed oil
L. Quiles-Carrillo et al.
EUROPEAN POLYMER JOURNAL (2018)
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
A. Carbonell-Verdu et al.
EXPRESS POLYMER LETTERS (2018)
Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oil
L. Quiles-Carrillo et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil
L. Quiles-Carrillo et al.
MATERIALS & DESIGN (2018)
A bio-based route to the carbon-5 chemical glutaric acid and to bionylon-6,5 using metabolically engineered Corynebacterium glutamicum
Christina Maria Rohles et al.
GREEN CHEMISTRY (2018)
PLA films with improved flexibility properties by using maleinized cottonseed oil
Alfredo Carbonell-Verdu et al.
EUROPEAN POLYMER JOURNAL (2017)
Epoxidized Soybean Oil-Based Epoxy Blend Cured with Anhydride-Based Cross-Linker: Thermal and Mechanical Characterization
Sudheer Kumar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
The effect of maleinized linseed oil as biobased plasticizer in poly (lactic acid)-based formulations
Jose M. Ferri et al.
POLYMER INTERNATIONAL (2017)
Recent advances in vegetable oil-based polymers and their composites
Chaoqun Zhang et al.
PROGRESS IN POLYMER SCIENCE (2017)
Design and synthesis of biobased epoxy thermosets from biorenewable resources
Camille Francois et al.
COMPTES RENDUS CHIMIE (2017)
Interpenetrating Polymer Network (IPN) with Epoxidized and Acrylated Bioresins and their Composites with Glass and Jute Fibres
Francisco Cardona et al.
BioResources (2016)
The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
J. M. Ferri et al.
CARBOHYDRATE POLYMERS (2016)
Improvement of properties for biobased composites from modified soybean oil and hemp fibers: Dual role of diisocyanate
Wendi Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Recent advances in bio-based epoxy resins and bio-based epoxy curing agents
Elyse A. Baroncini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
From Epoxidized Linseed Oil to Bioresin: An Overall Approach of Epoxy/Anhydride Cross-Linking
Jean-Mathieu Pin et al.
CHEMSUSCHEM (2015)
New environmentally friendly composite laminates with epoxidized linseed oil (ELO) and slate fiber fabrics
M. D. Samper et al.
COMPOSITES PART B-ENGINEERING (2015)
Development of environmentally friendly composite matrices from epoxidized cottonseed oil
A. Carbonell-Verdu et al.
EUROPEAN POLYMER JOURNAL (2015)
New insights into the curing of epoxidized linseed oil with dicarboxylic acids
Cheng Ding et al.
GREEN CHEMISTRY (2015)
Vegetable oil based eco-friendly coating materials: A review article
Manawwer Alam et al.
ARABIAN JOURNAL OF CHEMISTRY (2014)
Green composites: A review of adequate materials for automotive applications
Georgios Koronis et al.
COMPOSITES PART B-ENGINEERING (2013)
Study of the Properties of Thermoset Materials Derived from Epoxidized Soybean Oil and Protein Fillers
Vicent Fombuena et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2013)
Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation
Z. N. Azwa et al.
POLYMER DEGRADATION AND STABILITY (2013)
Thermal and Mechanical Characterization of Epoxy Resins (ELO and ESO) Cured with Anhydrides
M. D. Samper et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2012)
Properties of Biobased Epoxy Resins from Epoxidized Soybean Oil (ESBO) Cured with Maleic Anhydride (MA)
J. M. Espana et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2012)
Thermogravimetric behavior of natural fibers reinforced polymer composites-An overview
Sergio N. Monteiro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Thermal and Mechanical Properties of Anhydride-Cured Epoxy Resins with Different Contents of Biobased Epoxidized Soybean Oil
F. I. Altuna et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effect of the epoxidized linseed oil concentration as natural plasticizer in vinyl plastisols
O. Fenollar et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Biobased thermosets from the free-radical copolymerization of conjugated linseed oil
Phillip H. Henna et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners
N Boquillon et al.
POLYMER (2000)