Related references
Note: Only part of the references are listed.Topological, Mechanical and Biological Properties of Ti6Al4V Scaffolds for Bone Tissue Regeneration Fabricated with Reused Powders via Electron Beam Melting
Maria Laura Gatto et al.
MATERIALS (2021)
Additive manufacturing of a martensitic Co-Cr-Mo alloy: Towards circumventing the strength-ductility trade-off
Z. Wang et al.
ADDITIVE MANUFACTURING (2021)
Hybrid additive manufacturing of Inconel 718 for future space applications
M. Godec et al.
MATERIALS CHARACTERIZATION (2021)
Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility
Takuya Ishimoto et al.
SCRIPTA MATERIALIA (2021)
Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting
Vladimir Popov et al.
SCIENTIFIC REPORTS (2021)
A comprehensive review of ultrasonic additive manufacturing
Adam Hehr et al.
RAPID PROTOTYPING JOURNAL (2020)
Binder jetting additive manufacturing of copper foam structures
Hadi Miyanaji et al.
ADDITIVE MANUFACTURING (2020)
Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing
Zhen Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders
Andrey Koptyug et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The Effect of Powder Characteristics on Build Quality of High-Purity Tungsten Produced via Laser Powder Bed Fusion (LPBF)
A. C. Field et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Optimization of radio-frequency plasma parameters for spheroidization of zirconium oxide powders
K. Nagulin et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Laser-based powder bed fusion of alumina toughened zirconia
Fabrizio Verga et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Lei Yan et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of dense WE43 Mg alloy by laser powder bed fusion
Holden Hyer et al.
ADDITIVE MANUFACTURING (2020)
Binder Jetting 3D Printing of Titanium Aluminides Based Materials: A Feasibility Study
Pinku Yadav et al.
ADVANCED ENGINEERING MATERIALS (2020)
Comparison in characteristic and atomization behavior of metallic powders produced by plasma rotating electrode process
Yan Nie et al.
ADVANCED POWDER TECHNOLOGY (2020)
Wire and arc additive manufacturing of aluminum alloy lattice structure
Li Yongjie et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Daniel Powell et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review
Jing Shi et al.
JOURNAL OF MATERIALS SCIENCE (2020)
The Critical Raw Materials in Cutting Tools for Machining Applications: A Review
Antonella Rizzo et al.
MATERIALS (2020)
Advanced Powder Metallurgy Technologies
Pavel Novak
MATERIALS (2020)
Microstructures and properties of PVD TiAlN coating deposited on cermets with different Ti(C, N) grain size
Xiao Ya et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)
3D laser shock peening - A new method for improving fatigue properties of selective laser melted parts
Nikola Kalentics et al.
ADDITIVE MANUFACTURING (2020)
Development of process parameters for selective laser melting of a Zr-based bulk metallic glass
Jithin James Marattukalam et al.
ADDITIVE MANUFACTURING (2020)
Additive manufacturing of stellite 6 superalloy by direct laser metal deposition - Part 1: Effects of laser power and focal plane position
Mahmoud Moradi et al.
OPTICS AND LASER TECHNOLOGY (2020)
Nanoscale architecture of (CrNiZrN)/(CriZr) nanocomposite coatings: Microstructure, composition, mechanical properties and first-principles calculations
Olga Maksakova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
In situ synthesis of a binary Ti-10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders
Maria A. Surmeneva et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
High entropy A10.5CrMoNbTa0.5 alloy: Additive manufacturing vs. casting vs. CALPHAD approval calculations
A. Katz-Demyanetz et al.
MATERIALS CHARACTERIZATION (2020)
Electron-Beam Melting and Reuse of Metallic Materials
K. Vutova et al.
METAL SCIENCE AND HEAT TREATMENT (2020)
Tribological Properties of Chromium Nitride on the Cylinder Liner under the Influence of High Temperature
Shailesh Kumar Singh et al.
MATERIALS (2020)
Recent Development in Beta Titanium Alloys for Biomedical Applications
Liang-Yu Chen et al.
METALS (2020)
Laves phase control of inconel 718 superalloy fabricated by laser direct energy deposition via δ aging and solution treatment
Fencheng Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
The effect of reuse cycles on Ti-6Al-4V powder properties processed by electron beam powder bed fusion
Gitanjali Shanbhag et al.
MANUFACTURING LETTERS (2020)
Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials
S. Goel et al.
MATERIALS TODAY CHEMISTRY (2020)
Hybrid additive manufacturing of steels and alloys
Vladimir V. Popov et al.
MANUFACTURING REVIEW (2020)
Additive manufacturing of magnesium alloys
Rakeshkumar Karunakaran et al.
BIOACTIVE MATERIALS (2020)
Ceramic binder jetting additive manufacturing: Particle coating for increasing powder sinterability and part strength
Wenchao Du et al.
MATERIALS LETTERS (2019)
Three-dimensional printing of tungsten structures by directed energy deposition
Wonjong Jeong et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting
N. Kalentics et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Tiago A. Rodrigues et al.
MATERIALS (2019)
Metal Oxide Nanoparticle-Based Coating as a Catalyzer for A-TIG Welding: Critical Raw Material Perspective
Sebastian Balos et al.
METALS (2019)
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Xinyuan Lv et al.
CERAMICS INTERNATIONAL (2019)
Additive manufacturing for space: status and promises
Enea Sacco et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Effect of Electron Beam Method on Processing of Titanium Technogenic Material
Katia Vutova et al.
METALS (2019)
Additive manufacturing high performance graphene-based composites: A review
Yan Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
The influence of powder characteristics on the sintering behaviour and impurity content of spark-plasma-sintered zirconium
Lucyna Jaworska et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Development of Wire plus Arc additive manufacture for the production of large-scale unalloyed tungsten components
G. Marinelli et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Benchmarking of several material constitutive models for tribology, wear, and other mechanical deformation simulations of Ti6Al4V
Cen Liu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Selective laser melting of reduced graphene oxide/S136 metal matrix composites with tailored microstructures and mechanical properties
Shifeng Wen et al.
MATERIALS & DESIGN (2019)
Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration
A. Fleisher et al.
CERAMICS INTERNATIONAL (2019)
Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials
Takao Hori et al.
SCRIPTA MATERIALIA (2019)
Additive manufacturing of thin alumina ceramic cores using binder-jetting
Shuangjun Huang et al.
ADDITIVE MANUFACTURING (2019)
Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications
Cassidy Silbernagel et al.
ADDITIVE MANUFACTURING (2019)
3D laser shock peening as a way to improve geometrical accuracy in selective laser melting
Nikola Kalentics et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of Zr on the Microstructure of Second- and Third-Generation BCC HEAs
E. Eshed et al.
JOM (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Repairing surface defects of metal parts by groove machining and wire plus arc based filling
Yongzhe Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Healing cracks in selective laser melting by 3D laser shock peening
Nikola Kalentics et al.
ADDITIVE MANUFACTURING (2019)
A review of mechanical properties of additively manufactured Inconel 718
E. Hosseini et al.
ADDITIVE MANUFACTURING (2019)
A strong, wear- and corrosion-resistant, and antibacterial Co-30 at.% Cr-5 at.% Ag ternary alloy for medical implants
Feilong Jiang et al.
MATERIALS & DESIGN (2019)
Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend
Vladimir V. Popov et al.
HELIYON (2019)
Evolution of 316L stainless steel feedstock due to laser powder bed fusion process
Michael J. Heiden et al.
ADDITIVE MANUFACTURING (2019)
XPS, XRD, and SEM characterization of the virgin and recycled metallic powders for 3D printing applications
N. E. Gorji et al.
MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VII (MODTECH2019) (2019)
Recent advances on 3D printing graphene-based composites
Haichang Guo et al.
NANO MATERIALS SCIENCE (2019)
Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review
B. Barroqueiro et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)
Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends
Alexander Katz-Demyanetz et al.
MANUFACTURING REVIEW (2019)
Additive manufacturing to veterinary practice: recovery of bony defects after the osteosarcoma resection in canines
Vladimir V. Popov et al.
BIOMEDICAL ENGINEERING LETTERS (2019)
Powders for powder bed fusion: a review
Silvia Vock et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Additive manufacturing of a new Fe-Cr-Ni alloy with gradually changing compositions with elemental powder mixes and thermodynamic calculation
Wei Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Design and evaluation of an additively manufactured aircraft heat exchanger
David Saltzman et al.
APPLIED THERMAL ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten
Saurav Goel et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts
Fangda Xu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)
Sintering of WC-12%Co processed by binder jet 3D printing (BJ3DP) technology
Ravi K. Enneti et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Enhanced manufacturing possibilities using multi-materials in laser metal deposition
Frank Brueckner et al.
JOURNAL OF LASER APPLICATIONS (2018)
TiAl/RGO (reduced graphene oxide) bulk composites with refined microstructure and enhanced nanohardness fabricated by selective laser melting (SLM)
Ming Li et al.
MATERIALS CHARACTERIZATION (2018)
Additive manufacturing of multi-material structures
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
A comparative study of Ti-6A1-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization
G. Chen et al.
POWDER TECHNOLOGY (2018)
Energy and material efficiency of steel powder metallurgy
Jose M. C. Azevedo et al.
POWDER TECHNOLOGY (2018)
Microstructural Evolution and Phase Formation in 2nd-Generation Refractory-Based High Entropy Alloys
Eyal Eshed et al.
MATERIALS (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
Recycled Sm-Co bonded magnet filaments for 3D printing of magnets
Helena A. Khazdozian et al.
AIP ADVANCES (2018)
Carbon nanotubes as a unique agent to fabricate nanoceramic/metal composite powders for additive manufacturing
Weiwei Zhou et al.
MATERIALS & DESIGN (2018)
Current progress and future challenges in rare-earth-free permanent magnets
Jun Cui et al.
ACTA MATERIALIA (2018)
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Bintao Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Additive Manufacturing of High-Entropy Alloys: A Review
Shuying Chen et al.
ENTROPY (2018)
Investigation of Energy Requirements and Environmental Performance for Additive Manufacturing Processes
Zhichao Liu et al.
SUSTAINABILITY (2018)
Advances in Automotive Conversion Coatings during Pretreatment of the Body Structure: A Review
Mark Doerre et al.
COATINGS (2018)
Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness
Zaynab Mahbooba et al.
APPLIED MATERIALS TODAY (2018)
Mechanical properties and microstructures in zirconium deposited by injected powder laser additive manufacturing
Arshad Harooni et al.
ADDITIVE MANUFACTURING (2018)
Part decomposition and assembly-based (Re) design for additive manufacturing: A review
Yosep Oh et al.
ADDITIVE MANUFACTURING (2018)
The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens
Vladimir V. Popov et al.
ADDITIVE MANUFACTURING (2018)
Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging
Chu Lun Alex Leung et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of silicone structures: A review and prospective
Farzad Liravi et al.
ADDITIVE MANUFACTURING (2018)
Understanding grain evolution in additive manufacturing through modeling
Javed Akram et al.
ADDITIVE MANUFACTURING (2018)
Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion
Punnathat Bordeenithikasem et al.
ADDITIVE MANUFACTURING (2018)
Control of residual stress and distortion in aluminium wire plus arc additive manufacture with rolling
J. R. Honnige et al.
ADDITIVE MANUFACTURING (2018)
Additive Manufacturing of Advanced Multi-Component Alloys: Bulk Metallic Glasses and High Entropy Alloys
Xiaopeng Li
ADVANCED ENGINEERING MATERIALS (2018)
Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?
Martin Baumers et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion
I. Yadroitsev et al.
JOM (2017)
Review of the Methods for Production of Spherical Ti and Ti Alloy Powder
Pei Sun et al.
JOM (2017)
A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication
Ling Li et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)
Ti-Fe intermetallics analysis and control in joining titanium alloy and stainless steel by Laser Metal Deposition
Wei Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
Christian Haase et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field
Christian Huber et al.
SCIENTIFIC REPORTS (2017)
Material issues in additive manufacturing: A review
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
3D Laser Shock Peening - A new method for the 3D control of residual stresses in Selective Laser Melting
Nikola Kalentics et al.
MATERIALS & DESIGN (2017)
Current trends and future of sequential micro-machining processes on a single machine tool
Saeed Zare Chavoshi et al.
MATERIALS & DESIGN (2017)
From powders to bulk metallic glass composites
Lisa Kraemer et al.
SCIENTIFIC REPORTS (2017)
Densification mechanism for different types of stainless steel powders in Selective Laser Melting
Stefania Cacace et al.
10TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '16 (2017)
Laser based additive manufacturing in industry and academia
Michael Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Effect of powder oxidation on the impact toughness of electron beam melting Ti-6Al-4V
W. A. Grell et al.
ADDITIVE MANUFACTURING (2017)
Microstructure, Tensile and Creep Properties of Ta20Nb20Hf20Zr20Ti20 High Entropy Alloy
Natalya Larianovsky et al.
MATERIALS (2017)
A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing
J. J. S. Dilip et al.
DEFENCE TECHNOLOGY (2017)
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Amir Azhari et al.
CARBON (2017)
Optimization of 18-karat yellow gold alloys for the additive manufacturing of jewelry and watch parts
Ulrich E. Klotz et al.
GOLD BULLETIN (2017)
Fabrication and characterization of a functionally graded material from Ti-6Al-4V to SS316 by laser metal deposition
Wei Li et al.
ADDITIVE MANUFACTURING (2017)
Solutions for Critical Raw Materials under Extreme Conditions: A Review
Maria Luisa Grilli et al.
MATERIALS (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Additive Manufacturing of High-Entropy Alloys by Laser Processing
V. Ocelik et al.
JOM (2016)
Additive Manufacturing for Aerospace Flight Applications
A. A. Shapiro et al.
JOURNAL OF SPACECRAFT AND ROCKETS (2016)
Creation of bioactive glass (13-93) scaffolds for structural bone repair using a combined finite element modeling and rapid prototyping approach
Wei Xiao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
M. Fischer et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
M. Qian et al.
MRS BULLETIN (2016)
Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Qiming Wang et al.
PHYSICAL REVIEW LETTERS (2016)
Direct Metal Additive Manufacturing Processes and Their Sustainable Applications for Green Technology: A Review
Dong-Gyu Ahn
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Investigation of Tantalum Recycling by Electron Beam Melting
Katia Vutova et al.
METALS (2016)
Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
Alejandro Hinojos et al.
MATERIALS & DESIGN (2016)
Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625
Amir Mostafaei et al.
MATERIALS & DESIGN (2016)
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Seyed-Iman Roohani-Esfahani et al.
SCIENTIFIC REPORTS (2016)
3D Metal Printing Technology
Thomas Duda et al.
IFAC PAPERSONLINE (2016)
Obtaining crack-free WC-Co alloys by selective laser melting
R. S. Khmyrov et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
Neil J. Harrison et al.
ACTA MATERIALIA (2015)
Printing in Three Dimensions with Graphene
Esther Garcia-Tunon et al.
ADVANCED MATERIALS (2015)
Proposal of a new risk assessment method for the handling of powders and nanomaterials
Laurent Gridelet et al.
INDUSTRIAL HEALTH (2015)
Additive manufacturing of Cu-10Sn bronze
S. Scudino et al.
MATERIALS LETTERS (2015)
Twinning anisotropy of tantalum during nanoindentation
Saurav Goel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys
Jithin Joseph et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Structural and phase transformations in a quenched two-phase titanium alloy upon cold deformation and subsequent annealing
A. G. Illarionov et al.
PHYSICS OF METALS AND METALLOGRAPHY (2015)
An exploration of binder jetting of copper
Yun Bai et al.
RAPID PROTOTYPING JOURNAL (2015)
Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain Exploring the production and supply of metal powders for AM processes
Jason Dawes et al.
JOHNSON MATTHEY TECHNOLOGY REVIEW (2015)
Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures
Amir Azhari et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)
Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement
Dong Lin et al.
ACTA MATERIALIA (2014)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys
O. N. Senkov et al.
ACTA MATERIALIA (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Direct-write assembly of 3D scaffolds using colloidal calcium phosphates inks
Raquel C. Richard et al.
MATERIA-RIO DE JANEIRO (2014)
Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
Kamran Shah et al.
MATERIALS & DESIGN (2014)
Formation of Fe-based glassy matrix composite coatings by laser processing
P. Gargarella et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Characterization of Metal Powders Used for Additive Manufacturing
J. A. Slotwinski et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2014)
Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: Microstructure and phase analysis
O. N. Senkov et al.
ACTA MATERIALIA (2013)
Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing
Florent Le Bourhis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Iron-based bulk metallic glasses
C. Suryanarayana et al.
INTERNATIONAL MATERIALS REVIEWS (2013)
Surface characterisation of fine inert gas and water atomised stainless steel 316L powders: formation of thermodynamically unstable surface oxide phases
Y. Hedberg et al.
POWDER METALLURGY (2013)
Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting
Jan Wilkes et al.
RAPID PROTOTYPING JOURNAL (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
O. N. Senkov et al.
INTERMETALLICS (2011)
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
O. N. Senkov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Quantitative Evaluation of Bulk and Interface Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manufacturing
Hiromichi T. Fujii et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Selective Laser Melting (SLM) of pure gold
Mushtaq Khan et al.
GOLD BULLETIN (2010)
Influence of raw powder preparation routes on properties of hydroxyapatite fabricated by 3D printing technique
J. Suwanprateeb et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Suitability of maraging steel weld cladding for repair of die-casting tooling Part I: Influence of welding and aging heat treatment on 18 % Ni maraging steel weld microstructure and mechanical properties
Damjan Klobcar et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
Friction and wear behavior of laser-sintered iron-silicon carbide composites
C. S. Ramesh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of particle size on three dimensional printed mesh structures
Kathy Lu et al.
POWDER TECHNOLOGY (2009)
Porous NiTi for bone implants: A review
A. Bansiddhi et al.
ACTA BIOMATERIALIA (2008)
Suitability of maraging steel weld cladding for repair of die casting tooling Part II: Influence of ageing during aluminium alloy die casting on maraging steel weld microstructure, mechanical properties and crack growth
Damjan Klobcar et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2008)
Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
M. Turker et al.
MATERIALS CHARACTERIZATION (2008)
Particle shape modification and related property improvements
Guosheng Gai et al.
POWDER TECHNOLOGY (2008)
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
J. Russias et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Characterization of aluminum powders:: II.: Aluminum nanopowders passivated by non-inert coatings
Alexander Gromov et al.
PROPELLANTS EXPLOSIVES PYROTECHNICS (2006)
The potential applications for titanium metal powder and their life cycle impacts
T. E. Norgate et al.
JOM (2006)
Microstructural characterization of porous silicon carbide membrane support with and without alumina additive
M Fukushima et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
45S5 Bioglass®-derived glass-ceramic scaffolds for bone tissue engineering
QZZ Chen et al.
BIOMATERIALS (2006)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Hydroxyapatite porous scaffold engineered with biological polymer hybrid coating for antibiotic Vancomycin release
HW Kim et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Comparison of reciprocating wear behaviour of electrolytic hard chrome and arc-PVD CrN coatings
E Bozyazi et al.
WEAR (2004)
Laminated object manufacturing (LOM) of SiSiC composites
L Weisensel et al.
ADVANCED ENGINEERING MATERIALS (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Improved surface finish in 3D printing using bimodal powder distribution
M Lanzetta et al.
RAPID PROTOTYPING JOURNAL (2003)
Al2O3 ceramics preparation by LOM (laminated object manufacturing)
Y Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)
Bioglass ®45S5 stimulates osteoblast turnover and enhances bone formation in vitro:: Implications and applications for bone tissue engineering
ID Xynos et al.
CALCIFIED TISSUE INTERNATIONAL (2000)
Share Paper
