Related references
Note: Only part of the references are listed.The potential of Ti3C2Tx nano-sheets (MXenes) for nanoscale solid lubrication revealed by friction force microscopy
A. Rodriguez et al.
APPLIED SURFACE SCIENCE (2021)
Nano friction and adhesion properties on Ti3C2 and Nb2C MXene studied by AFM
Xuanli Zhou et al.
TRIBOLOGY INTERNATIONAL (2021)
Quantitative measurement of transfer film thickness of PTFE based composites by infrared spectroscopy
Yanqi Gu et al.
TRIBOLOGY INTERNATIONAL (2021)
Generation mechanism of friction anisotropy by surface texturing under boundary lubrication
Shota Ito et al.
TRIBOLOGY INTERNATIONAL (2020)
Friction characteristics of mechanically microtextured metal surface in dry sliding
Jun Shimizu et al.
TRIBOLOGY INTERNATIONAL (2020)
The tribological performance of engineered micro-surface topography by picosecond laser on PEEK
Meiling Wang
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2020)
Interfacial Nanostructure of 2D Ti3C2/Graphene Quantum Dots Hybrid Multicoating for Ultralow Wear
Xuan Yin et al.
ADVANCED ENGINEERING MATERIALS (2020)
Sub-micron structuring/texturing of diamond-like carbon-coated replication masters with a femtosecond laser
Aleksandra Michalek et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)
Speed dependence of friction on single-layer and bulk MoS2 measured by atomic force microscopy
Ogulcan Acikgoz et al.
APPLIED PHYSICS LETTERS (2020)
LIPSS combined with ALD MoS2 nano-coatings for enhancing surface friction and hydrophobic performances
Youqiang Xing et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Tribological properties of textured stator and PTFE-based material in travelling wave ultrasonic motors
Jinbang Li et al.
FRICTION (2020)
Lubrication modeling and wear calculation in artificial hip joint during the gait
Alessandro Ruggiero et al.
TRIBOLOGY INTERNATIONAL (2020)
Improving the wear resistance of PTFE-based friction material used in ultrasonic motors by laser surface texturing
Shuaishuai Zeng et al.
TRIBOLOGY INTERNATIONAL (2020)
Influence of sheet metal texture on the adhesive wear and friction behaviour of EN AW-5083 aluminum under dry and starved lubrication
Felix Flegler et al.
TRIBOLOGY INTERNATIONAL (2020)
Hybrid Wear-Reducing Micro-pits Counterface Texture Against Polymeric Solid Lubricants
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2020)
Mechanical response of industrial benchmark lipsticks under large-scale deformations
Sharadwata Pan et al.
ACTA MECHANICA (2020)
A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools
M. Adam Khan et al.
MATERIALS RESEARCH EXPRESS (2020)
Effect of Shape, Density, and an Array of Dimples on the Friction and Wear Performance of Laser Textured Bearing Steel under Dry Sliding
Manish Kumar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Effects of surface composite structure with micro-grooves and Sn-Ag-Cu on reducing friction and wear of Ni3Al alloys
Guanchen Lu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Polymers Tribology Exposed: Eliminating Transfer Film Effects to Clarify Ultralow Wear of PTFE
K. Istiaque Alam et al.
TRIBOLOGY LETTERS (2020)
Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces
Hao Wang et al.
ADVANCES IN MECHANICAL ENGINEERING (2020)
Roughness analysis of electrochemically textured surfaces: effects on friction and wear of lubricated contacts
T. A. Rodrigues et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2020)
2D nano-materials beyond graphene: from synthesis to tribological studies
Andreas Rosenkranz et al.
APPLIED NANOSCIENCE (2020)
Nanoscale Friction Behavior of Transition-Metal Dichalcogenides: Role of the Chalcogenide
Mohammad R. Vazirisereshk et al.
ACS NANO (2020)
Friction Anisotropy of MoS2: Effect of Tip-Sample Contact Quality
Mohammad R. Vazirisereshk et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)
Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental
Doris Nekesa Khaemba et al.
TRIBOLOGY INTERNATIONAL (2020)
Experiment of frictional vibration performance of the micro-texture of DLC thin film with dry gas seal rings
Xuexing Ding et al.
TRIBOLOGY INTERNATIONAL (2020)
Optimization of surface textures in hydrodynamic lubrication through the adjoint method
A. Codrignani et al.
TRIBOLOGY INTERNATIONAL (2020)
Ni-Doped MoS2Dry Film Lubricant Life
Azhar Vellore et al.
ADVANCED MATERIALS INTERFACES (2020)
Direct imaging, three-dimensional interaction spectroscopy, and friction anisotropy of atomic-scale ripples on MoS2
Omur E. Dagdeviren et al.
NPJ 2D MATERIALS AND APPLICATIONS (2020)
Effective usage of 2D MXene nanosheets as solid lubricant - Influence of contact pressure and relative humidity
Max Marian et al.
APPLIED SURFACE SCIENCE (2020)
The influence of textured interface on DLC films prepared by vacuum arc
X. Liu et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Friction performance of DLC film textured surface of high pressure dry gas sealing ring
Delin Chen et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Self-competing and Coupled Effect of Laser-Engraved Counterface Groove Depth and Density on Wear of Alumina PTFE
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2019)
Surface Texturing in Machine Elements - A Critical Discussion for Rolling and Sliding Contacts
Andreas Rosenkranz et al.
ADVANCED ENGINEERING MATERIALS (2019)
Surface 3-D lubrication structure design of Al2O3/Ni-laminated ceramics to improve tribological properties under combined environments
Hengzhong Fan et al.
APPLIED SURFACE SCIENCE (2019)
Tribological behavior of laser textured nodular cast iron surface
Yongmei Zhu et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2019)
Experimental analysis of the effects of laser surface texturing on tribological properties of PTFE/Kevlar fabric composite weave structures
Xiaowen Qi et al.
TRIBOLOGY INTERNATIONAL (2019)
The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2019)
Wear performance of electrohydrodynamically atomized WS2 coatings deposited on biomimetic shark-skin textured surfaces
Xuemu Li et al.
TRIBOLOGY INTERNATIONAL (2019)
Influence of surface texturing on hydrodynamic friction in plane converging bearings - An experimental and numerical approach
Andreas Rosenkranz et al.
TRIBOLOGY INTERNATIONAL (2019)
The tribology behaviors of textured graphite-like carbon film under air and aqueous environments
Lei Shi et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2019)
Ultra-Wear-Resistant MXene-Based Composite Coating via in Situ Formed Nanostructured Tribofilm
Xuan Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
The Rise of MXenes
Yury Gogotsi et al.
ACS NANO (2019)
A novel assembly of MoS2-PTFE solid lubricants into wear-resistant micro-hole array template and corresponding tribological performance
A. H. Wang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Design of double layer texture to obtain superhydrophobic and high wear-resistant PTFE coatings on the surface of Al2O3/Ni layered ceramics
Hengzhong Fan et al.
TRIBOLOGY INTERNATIONAL (2019)
Designing surface textures for EHL point-contacts - Transient 3D simulations, meta-modeling and experimental validation
Max Marian et al.
TRIBOLOGY INTERNATIONAL (2019)
Influence of Femtosecond Laser Surface Nanotexturing on the Friction Behavior of Silicon Sliding Against PTFE
Isabel Alves-Lopes et al.
NANOMATERIALS (2019)
Experimental investigation of tribological properties of laser textured tungsten doped diamond like carbon coating under dry sliding conditions at various loads
A. Arslan et al.
MATERIALS RESEARCH EXPRESS (2019)
Multi-layer Ti3C2Tx-nanoparticles (MXenes) as solid lubricants - Role of surface terminations and intercalated water
Andreas Rosenkranz et al.
APPLIED SURFACE SCIENCE (2019)
Self-lubricating Ti3C2 nanosheets copper composite coatings
Y. J. Mai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Shuai Zhang et al.
MATERIALS TODAY (2019)
Modifying tribological performances of AISI 316 stainless steel surfaces by laser surface texturing and various solid lubricants
Rong Meng et al.
OPTICS AND LASER TECHNOLOGY (2019)
Frictional properties of silver over-coated on surface textured tantalum interlayer at elevated temperatures
Jianliang Li et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Tribology review of blended bulk polymers and their coatings for high-load bearing applications
Emerson Escobar Nunez et al.
TRIBOLOGY INTERNATIONAL (2019)
On Friction Reduction by Surface Modifications in the TEHL Cam/Tappet-Contact-Experimental and Numerical Studies
Max Marian et al.
COATINGS (2019)
Tribology and Industry: From the Origins to 4.0
Enrico Ciulli
FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2019)
Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives
Philipp G. Gruetzmacher et al.
LUBRICANTS (2019)
Solid Lubrication with MoS2: A Review
Mohammad R. Vazirisereshk et al.
LUBRICANTS (2019)
The Competing Effects of Counterface Peaks and Valleys on the Wear and Transfer of Ultra-Low Wear Alumina-PTFE
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2018)
Tribological performance and self-lubricating mechanism of the laser-textured surface filled with solid lubricant in rolling friction pair
Xijun Hua et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Improving tribological performance of cemented carbides by combining laser surface texturing and W-S-C solid lubricant coating
Rong Meng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS2 coatings prepared on aluminum-silicon alloys
Luanxia Chen et al.
TRIBOLOGY INTERNATIONAL (2018)
Effect of laser surface texture on CuSn6 bronze sliding against PTFE material under dry friction
Jinbang Li et al.
TRIBOLOGY INTERNATIONAL (2018)
Influence of tribo-magnetization on wear debris trapping processes of textured dimples
Aibing Yu et al.
TRIBOLOGY INTERNATIONAL (2018)
Effects of the micro surface texturing in lubricated non-conformal point contacts
G. S. Joshi et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological behaviour of laser textured Ti6Al4V alloy coated with MoS2 and graphene
M. A. Arenas et al.
TRIBOLOGY INTERNATIONAL (2018)
Toward low friction in high vacuum by designing textured a-C/IL duplex lubricating film
Hui Song et al.
VACUUM (2018)
A DLC-Punch Array to Fabricate the Micro-Textured Aluminum Sheet for Boiling Heat Transfer Control
Tatsuhio Aizawa et al.
MICROMACHINES (2018)
Effect of particles' characteristics and road surface's texture on the tire/road friction
Y. Hichri et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2018)
Two-dimensional Ti3C2 coating as an emerging protective solid-lubricant for tribology
Weiqi Lian et al.
CERAMICS INTERNATIONAL (2018)
Friction properties and lubrication mechanism of self-lubricating composite solid lubricant on laser textured AISI 52100 surface in sliding contact
Xijun Hua et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2018)
An exploration of the performance behaviors of lubricated textured and conventional spur gearsets
Niharika Gupta et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological behavior and self-healing functionality of M50 material covered with surface micropores filled with Sn-Ag-Cu
Xiyao Liu et al.
TRIBOLOGY INTERNATIONAL (2018)
Wear performance of the WC/Cu self-lubricating textured coating
Pengbo Mi et al.
VACUUM (2018)
Tribological Performance of Microhole-Textured Carbide Tool Filled with CaF2
Wenlong Song et al.
MATERIALS (2018)
Emerging superlubricity: A review of the state of the art and perspectives on future research
Mehmet Z. Baykara et al.
APPLIED PHYSICS REVIEWS (2018)
Nd:YOV4 Laser Surface Texturing on DLC coating: effect on morphology, adhesion, and dry wear behavior
Maria Surfaro et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Factors influencing microinjection molding replication quality
Julie Vera et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
Effect of Humidity on Friction and WearA Critical Review
Zhe Chen et al.
LUBRICANTS (2018)
Femtosecond-laser surface modification and micropatterning of diamond-like nanocomposite films to control friction on the micro and macroscale
S. M. Pimenov et al.
JOURNAL OF APPLIED PHYSICS (2017)
Thickness dependent friction on few-layer MoS2, WS2, and WSe2
Liang Fang et al.
NANOTECHNOLOGY (2017)
Investigation of laser texture density and diameter on the tribological behavior of hydrogenated DLC coating with line contact configuration
A. Arslan et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Combination of laser surface texturing and DLC coating on PEEK for enhanced tribological properties
Johnny Dufils et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Tribological properties of dimple-textured titanium alloys under dry sliding contact
Ze Wu et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Sliding wear characteristics of solid lubricant coating on titanium alloy surface modified by laser texturing and ternary hard coatings
M. Prem Ananth et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Low Wear Steel Counterface Texture Design: A Case Study Using Micro-pits Texture and Alumina-PTFE Nanocomposite
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2017)
Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Continuous Lubrication from Room Temperature to 800°C
Yunfeng Su et al.
TRIBOLOGY LETTERS (2017)
On the Performance of EHL Contacts with Textured Surfaces
Morteza Taee et al.
TRIBOLOGY LETTERS (2017)
A critical assessment of surface texturing for friction and wear improvement
C. Gachot et al.
WEAR (2017)
Tribological behavior of gray cast iron textured by maskless electrochemical texturing
L. R. R. da Silva et al.
WEAR (2017)
Nanotribological behavior of bioinspired textured surfaces with directional characteristics
H. S. Grewal et al.
WEAR (2017)
Improving dry machining performance of TiAlN hard-coated tools through combined technology of femtosecond laser-textures and WS2 soft-coatings
Kedong Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
2D metal carbides and nitrides (MXenes) for energy storage
Babak Anasori et al.
NATURE REVIEWS MATERIALS (2017)
Long-lasting solid lubrication by CNT-coated patterned surfaces
L. Reinert et al.
SCIENTIFIC REPORTS (2017)
Oral tribology: update on the relevance to study astringency in wines
Laura Laguna et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2017)
Enhanced Growth of ZDDP-Based Tribofilms on Laser-Interference Patterned Cylinder Roller Bearings
Chia-Jui Hsu et al.
LUBRICANTS (2017)
Laser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement
Johannes Schneider et al.
LUBRICANTS (2017)
Superlubricity between MoS2 Monolayers
He Li et al.
ADVANCED MATERIALS (2017)
Improved adaptability of polyaryl-ether-ether-ketone with texture pattern and graphite-like carbon film for bio-tribological applications
Siming Ren et al.
APPLIED SURFACE SCIENCE (2017)
Contribution to interplay between a delamination test and a sensory analysis of mid-range lipsticks
C. Richard et al.
INTERNATIONAL JOURNAL OF COSMETIC SCIENCE (2016)
Structure and friction properties of laser-patterned amorphous carbon films
M. S. Komlenok et al.
DIAMOND AND RELATED MATERIALS (2016)
Effect of hybrid texture combining micro-pits and micro-grooves on cutting performance of WC/Co-based tools
Jialin Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of change in temperature on the tribological performance of micro surface textured DLC coating
Ahmed Arslan et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Tribological Properties of Laser Microtextured Surface Bonded With Composite Solid Lubricant at High Temperature
Xijun Hua et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2016)
Tribological performance of few layer graphene on textured M2 steel surfaces
Zhen Shi et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Effect of micro/nano-textures and burnished MoS2 addition on the tribological properties of PVD TiAlN coatings against AISI 316 stainless steel
Kedong Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Tribological properties of silver coatings with laser surface textured nickel as interlayer
Jianliang Li et al.
TRIBOLOGY INTERNATIONAL (2016)
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Daniel Gropper et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological Classification of Contact Lenses: From Coefficient of Friction to Sliding Work
O. Sterner et al.
TRIBOLOGY LETTERS (2016)
Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning
Andreas Rosenkranz et al.
WEAR (2016)
Preparation, mechanical and anti-friction performance of MXene/polymer composites
Heng Zhang et al.
MATERIALS & DESIGN (2016)
Oral tribology: bridging the gap between physical measurements and sensory experience
Clementine Pradal et al.
CURRENT OPINION IN FOOD SCIENCE (2016)
A Review of Transfer Films and Their Role in Ultra-Low-Wear Sliding of Polymers
Jiaxin Ye et al.
LUBRICANTS (2016)
Microstructural and Chemical Characterization of the Tribolayer Formation in Highly Loaded Cylindrical Roller Thrust Bearings
Carsten Gachot et al.
LUBRICANTS (2016)
Modulation of dry tribological property of stainless steel by femtosecond laser surface texturing
Zhuo Wang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)
Micro- and nanoscale surface texturing effects on surface friction
Myeong Kang et al.
APPLIED SURFACE SCIENCE (2015)
Dependence between friction of laser interference patterned carbon and the thin film morphology
Teja Roch et al.
DIAMOND AND RELATED MATERIALS (2015)
Influence of layer thickness on sliding wear of multifunctional tribological coatings
Luciano Castro Lara et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2015)
High performance nanostructured Cr-WS2 solid lubricant coatings prepared on mechanically textured substrates
B. Deepthi et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2015)
PTFE Tribology and the Role of Mechanochemistry in the Development of Protective Surface Films
Kathryn L. Harris et al.
MACROMOLECULES (2015)
Spontaneous Blinking from a Tribological Viewpoint
Heiko Pult et al.
Ocular Surface (2015)
Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film
Yongkun Qin et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Dry sliding wear behavior of TC11 alloy at 500 °C: Influence of laser surface texturing
Qichun Sun et al.
TRIBOLOGY INTERNATIONAL (2015)
The effects of surface texture in reciprocating contacts - An experimental study
Sorin-Cristian Vladescu et al.
TRIBOLOGY INTERNATIONAL (2015)
Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film
Dongqing He et al.
TRIBOLOGY INTERNATIONAL (2015)
Transfer Film Tenacity: A Case Study Using Ultra-Low-Wear Alumina-PTFE
J. Ye et al.
TRIBOLOGY LETTERS (2015)
Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting
K. E. Trinh et al.
WEAR (2015)
A study of the tribological behavior of transfer films of PTFE composites formed under different loads, speeds and morphologies of the counterface
HuLin Li et al.
WEAR (2015)
Effect of laser surface textures combined with multi-solid lubricant coatings on the tribological properties of Al2O3/TiC ceramic
Youqiang Xing et al.
WEAR (2015)
In Situ TEM Characterization of Shear-Stress-Induced Interlayer Sliding in the Cross Section View of Molybdenum Disulfide
Juan Pablo Oviedo et al.
ACS NANO (2015)
Tribological investigation of ultra-high molecular weight polyethylene against advanced ceramic surfaces in total hip joint replacement
Dipankar Choudhury et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Nano-texture for a wear-resistant and near-frictionless diamond-like carbon
Ala' A. Al-Azizi et al.
CARBON (2014)
Tribological interaction between polytetrafluoroethylene and silicon oxide surfaces
A. Ucar et al.
JOURNAL OF CHEMICAL PHYSICS (2014)
Sliding Properties of MoS2 Layers: Load and Interlayer Orientation Effects
G. Levita et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Friction reduction using discrete surface textures: principle and design
Stephen M. Hsu et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Graphene: a new emerging lubricant
Diana Berman et al.
MATERIALS TODAY (2014)
Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings
Youqiang Xing et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Hard coatings with high temperature adaptive lubrication and contact thermal management: review
A. A. Voevodin et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Lubricious oxide coatings for extreme temperature applications: A review
S. M. Aouadi et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Tribological properties of laser-textured and ta-C coated surfaces with burnished WS2 at elevated temperatures
Jussi Oksanen et al.
TRIBOLOGY INTERNATIONAL (2014)
To increase the hydrophobicity, non-stickiness and wear resistance of DLC surface by surface texturing using a laser ablation process
P. W. Shum et al.
TRIBOLOGY INTERNATIONAL (2014)
Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
Daniel Braun et al.
TRIBOLOGY INTERNATIONAL (2014)
Tribological Properties of Ultrathin DLC-Coated Nanotextured Surface on a PET Film
Hiroshi Tani et al.
TRIBOLOGY LETTERS (2014)
Alignment and wear debris effects between laser-patterned steel surfaces under dry sliding conditions
Andreas Rosenkranz et al.
WEAR (2014)
Laser interference induced nano-crystallized surface swellings of amorphous carbon for advanced micro tribology
Teja Roch et al.
MATERIALS RESEARCH EXPRESS (2014)
Achieving superlubricity in DLC films by controlling bulk, surface, and tribochemistry
Ali Erdemir et al.
FRICTION (2014)
Mechanistic studies of high temperature friction reduction in silver tantalate
H. Gao et al.
APPLIED PHYSICS LETTERS (2013)
Direct Laser Interference Patterning of tetrahedral amorphous carbon films for tribological applications
Teja Roch et al.
DIAMOND AND RELATED MATERIALS (2013)
Cooperative effect of solid lubricant and laser texturing on tribological properties of magnesium alloy surface
Tianchang Hu et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2013)
Study on Wear and Friction Behavior of Graphite Flake-Filled PTFE Composites
R. K. Goyal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Solid lubricants: a review
T. W. Scharf et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Transfer-Film Formation Mechanism of Polytetrafluoroethylene: A Computational Chemistry Approach
Tasuku Onodera et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction
Xing Youqiang et al.
MATERIALS & DESIGN (2013)
Nonlinear laser lithography for indefinitely large-area nanostructuring with femtosecond pulses
Bulent Oktem et al.
NATURE PHOTONICS (2013)
Hardness and surface roughness of hydrogenated amorphous carbon films synthesized by atmospheric pressure plasma enhanced CVD method with various pulse frequencies
T. Sakurai et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Oxygen plasma etching of diamond-like carbon coated mold-die for micro-texturing
Tatsuhiko Aizawa et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface
Dawit Zenebe Segu et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication
Ashwin Ramesh et al.
TRIBOLOGY INTERNATIONAL (2013)
Dry Friction Between Laser-Patterned Surfaces: Role of Alignment, Structural Wavelength and Surface Chemistry
Carsten Gachot et al.
TRIBOLOGY LETTERS (2013)
Friction and Lifetime of Laser Surface-Textured and MoS2-Coated Ti6Al4V Under Dry Reciprocating Sliding
Manel Rodriguez Ripoll et al.
TRIBOLOGY LETTERS (2013)
Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls
J. D. B. De Mello et al.
WEAR (2013)
Influence of linear reciprocating and multi-directional sliding on PEEK wear performance and transfer film formation
K. A. Laux et al.
WEAR (2013)
Effect of laser surface modification on the micro-abrasive wear resistance of coated cemented carbide tools
W. M. da Silva et al.
WEAR (2013)
Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V
Wu Ze et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes
Deng Jianxin et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Surface texturing for adaptive Ag/MoS2 solid lubricant plating
Huang Zhongjia et al.
RARE METALS (2012)
Surface topography effect on galling resistance of coated and uncoated tool steel
B. Podgornik et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Effective solution for the tribological problems of Ti-6Al-4V: Combination of laser surface texturing and solid lubricant film
Tianchang Hu et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Adaptive NbN/Ag coatings for high temperature tribological applications
D. S. Stone et al.
SURFACE & COATINGS TECHNOLOGY (2012)
From natural lotus leaf to highly hard-flexible diamond-like carbon surface with superhydrophobic and good tribological performance
Ying Wang et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Break-away friction of PTFE materials in lubricated conditions
Arash Golchin et al.
TRIBOLOGY INTERNATIONAL (2012)
Global energy consumption due to friction in passenger cars
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2012)
Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys
Wu Ze et al.
WEAR (2012)
The pairing-dependent effects of laser surface texturing on micro tribological behavior of amorphous carbon film
Qi Ding et al.
WEAR (2012)
Tribological investigation of MoS2 coatings deposited on the laser textured surface
Tianchang Hu et al.
WEAR (2012)
Micro-texture at the coated tool face for high performance cutting
Toshiyuki Obikawa et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Modifying surface properties of diamond-like carbon films via nanotexturing
C. Corbella et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)
Friction Anisotropy-Driven Domain Imaging on Exfoliated Monolayer Graphene
Jin Sik Choi et al.
SCIENCE (2011)
Textured VN coatings with Ag3VO4 solid lubricant reservoirs
B. Luster et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Improved Tribological Behavior of DLC Films Under Water Lubrication by Surface Texturing
Qi Ding et al.
TRIBOLOGY LETTERS (2011)
Friction and Wear Properties of MoS2-Overcoated Laser Surface-Textured Silver-Containing Nickel-Based Alloy at Elevated Temperatures
Jianliang Li et al.
TRIBOLOGY LETTERS (2011)
Improving anti-adhesive properties of cutting tool surfaces by nano-/micro-textures
T. Enomoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
A Computational Chemistry Study on Friction of h-MoS2 Part II Friction Anisotropy
Tasuku Onodera et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2010)
Frictional Characteristics of Atomically Thin Sheets
Changgu Lee et al.
SCIENCE (2010)
Mechanisms of self-lubrication in patterned TiN coatings containing solid lubricant microreservoirs
Canan G. Guleryuz et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Rolling Contact Fatigue Performance of Vibro-Mechanical Textured Surfaces
Aaron Greco et al.
TRIBOLOGY TRANSACTIONS (2010)
Design, fabrication and properties of a self-lubricated tool in dry cutting
Deng Jianxin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effects of die surface patterning on lubrication in strip drawing
H. L. Costa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A Computational Chemistry Study on Friction of h-MoS2. Part I. Mechanism of Single Sheet Lubrication
Tasuku Onodera et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2009)
Machining performance of TiN coatings incorporating indium as a solid lubricant
Canan G. Guleryuz et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Multifunctionality of single-walled carbon nanotube-polytetrafluoroethylene nanocomposites
J. R. Vail et al.
WEAR (2009)
Wear life and adhesion of solid lubricant films on laser-textured steel surfaces
L. Rapoport et al.
WEAR (2009)
Control of tribological properties of diamond-like carbon films with femtosecond-laser-induced nanostructuring
Naoki Yasumaru et al.
APPLIED SURFACE SCIENCE (2008)
Advances in engineered surfaces for functional performance
A. A. G. Bruzzone et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant microreservoirs
John H. Zimmerman et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Surface texturing for adaptive solid lubrication
R. Basnyat et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Friction and wear of MoS2 films on laser textured steel surfaces
L. Rapoport et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Action of a femtosecond laser generated micro-cavity passing through a circular EHL contact
L. Mourier et al.
WEAR (2008)
Tribological effects of surface texturing on nitriding steel for high-performance engine applications
A. Borghi et al.
WEAR (2008)
Surface texturing using pulsed air arc treatment
A. Moshkovith et al.
WEAR (2007)
Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions
H. L. Costa et al.
TRIBOLOGY INTERNATIONAL (2007)
Polymeric nanocomposites for tribological applications
David L. Burris et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2007)
Entrainment and inlet suction: Two mechanisms of hydrodynamic lubrication in textured bearings
M. Fowell et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)
Laser surface texturing for adaptive solid lubrication
A. A. Voevodin et al.
WEAR (2006)
Tribology of diamond-like carbon films: recent progress and future prospects
Ali Erdemir et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)
'Inlet suction', a load support mechanism in non-convergent, pocketed, hydrodynamic bearings
A. V. Olver et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2006)
DLC cold welding prevention films on a Ti6Al4V alloy for space applications
LV Santos et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Two-dimensional atomic crystals
KS Novoselov et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2005)
Tribological sensitivity of PTFE/alumina nanocomposites to a range of traditional surface finishes
DL Burris et al.
TRIBOLOGY TRANSACTIONS (2005)
Review of engineered tribological interfaces for improved boundary lubrication
A Erdemir
TRIBOLOGY INTERNATIONAL (2005)
State of the art in laser surface texturing
I Etsion
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2005)
The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic
A Kovalchenko et al.
TRIBOLOGY TRANSACTIONS (2004)
Historical developments and new trends in tribological and solid lubricant coatings
C Donnet et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Solid lubricant coatings: recent developments and future trends
C Donnet et al.
TRIBOLOGY LETTERS (2004)
Improving tribological performance of mechanical components by laser surface texturing
I Etsion
TRIBOLOGY LETTERS (2004)
Comprehensive model for scale effects in friction due to adhesion and two- and three-body deformation (plowing)
B Bhushan et al.
ACTA MATERIALIA (2004)
Laser treatment of tribological DLC films
G Dumitru et al.
DIAMOND AND RELATED MATERIALS (2003)
Effect of surface patterning on contact deformation of elastic-plastic layered media
ZQ Gong et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2003)
Influence of surface texture on boundary lubricated sliding contacts
U Pettersson et al.
TRIBOLOGY INTERNATIONAL (2003)
Wetting of textured surfaces
J Bico et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2002)
A laser surface textured hydrostatic mechanical seal
I Etsion et al.
TRIBOLOGY TRANSACTIONS (2002)
Diamond-like amorphous carbon
J Robertson
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)
The friction and wear characteristics of nanometer SiC and polytetrafluoroethylene filled polyetheretherketone
QH Wang et al.
WEAR (2000)
Tribology of thin coatings
K Holmberg et al.
CERAMICS INTERNATIONAL (2000)