Related references
Note: Only part of the references are listed.Performance analysis of thrust pad bearing using micro-rectangular pocket and bionic texture
J. C. Atwal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)
Static and dynamic characteristics of high-speed water-lubricated spiral-groove thrust bearing considering cavitating and centrifugal effects
Shaowen Zhang et al.
TRIBOLOGY INTERNATIONAL (2020)
Experimental research on tribological and vibration performance of water-lubricated hydrodynamic thrust bearings used in marine shaft-less rim driven thrusters
Xingxin Liang et al.
WEAR (2019)
Effect of manufacturing errors of the pad sliding surface on the performance of the hydrodynamic thrust bearing
Loukas Zoupas et al.
TRIBOLOGY INTERNATIONAL (2019)
Effect of spherical-convex surface texture on tribological performance of water-lubricated bearing
Dong Hu et al.
TRIBOLOGY INTERNATIONAL (2019)
Study on influence of Koch snowflake surface texture on tribological performance for marine water-lubricated bearings
Tie Chang et al.
TRIBOLOGY INTERNATIONAL (2019)
Performance Studies of Powder-Lubricated Journal Bearing Having Different Pocket Shapes at Cylindrical Bore Surface
Faisal Rahmani et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Numerical analysis and optimization of surface textures for a tilting pad thrust bearing
Daniel Gropper et al.
TRIBOLOGY INTERNATIONAL (2018)
Thermohydrodynamic analysis of high speed water-lubricated spiral groove thrust bearing considering effects of cavitation, inertia and turbulence
Xiaohui Lin et al.
TRIBOLOGY INTERNATIONAL (2018)
Performance investigation of micro-pocketed textured pad thrust bearing
Shipra Aggarwal et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Numerical analysis of water-lubricated thrust bearing with groove texture considering turbulence and cavitation
Huihui Feng et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Numerical analysis and experimental research on load carrying capacity of water-lubricated tilting-pad thrust bearings
Xiuli Zhang et al.
MECHANICS & INDUSTRY (2018)
Frictional and load-carrying behaviours of micro-textured sector shape pad thrust bearing incorporating the cavitation and thermal effects
Shipra Aggarwal et al.
LUBRICATION SCIENCE (2017)
3-D thermohydrodynamic analysis of textured, grooved, pocketed and hydrophobic pivoted-pad thrust bearings
Vassilios Zouzoulas et al.
TRIBOLOGY INTERNATIONAL (2017)
A critical assessment of surface texturing for friction and wear improvement
C. Gachot et al.
WEAR (2017)
Numerical analysis of the texture effect on the hydrodynamic performance of a mechanical seal
M. Adjemout et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2016)
Self-adaptive surface texture design for friction reduction across the lubrication regimes
Stephen M. Hsu et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2016)
A comparative study of full and partial textured hybrid orifice compensated circular thrust pad bearing system
Satish C. Sharma et al.
TRIBOLOGY INTERNATIONAL (2016)
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Daniel Gropper et al.
TRIBOLOGY INTERNATIONAL (2016)
Tribological performance analysis of textured steel surfaces under lubricating conditions
R. C. Singh et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2016)
Performance of Lubricated Rolling/Sliding Concentrated Contacts With Surface Textures: A Review
U. Sudeep et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2015)
About the Constantinescu turbulent model in hydrodynamic lubrication: A comparison with 3-D LES models
J. Durany et al.
TRIBOLOGY INTERNATIONAL (2015)
Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding
Cong Shen et al.
TRIBOLOGY INTERNATIONAL (2015)
Efficient Solution to the Cavitation Problem in Hydrodynamic Lubrication
Tomasz Woloszynski et al.
TRIBOLOGY LETTERS (2015)
Evaluation of discretization and integration methods for the analysis of finite hydrodynamic bearings with surface texturing
Tomasz Woloszynski et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration
Y. Henry et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Effects of surface texturing in steady-state and transient flow conditions: Two-dimensional numerical simulation using a mass-conserving cavitation model
A. Gherca et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
Performance comparison between textured, pocket, and tapered-land sector-pad thrust bearings using computational fluid dynamics thermohydrodynamic analysis
Dimitrios G. Fouflias et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2015)
The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication
Jinghu Ji et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2014)
Friction reduction using discrete surface textures: principle and design
Stephen M. Hsu et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)
Computational Fluid Dynamics Thermohydrodynamic Analysis of Three-Dimensional Sector-Pad Thrust Bearings With Rectangular Dimples
C. I. Papadopoulos et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2014)
Comparative analysis of textured and grooved hydrodynamic journal bearing
S. Kango et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2014)
Thermal analysis of microtextured journal bearing using non-Newtonian rheology of lubricant and JFO boundary conditions
S. Kango et al.
TRIBOLOGY INTERNATIONAL (2014)
Use of structured surfaces for friction and wear control on bearing surfaces
Ling Wang
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2014)
On influence of cavitation in lubricant upon tribological performances of textured surfaces
F. M. Meng
OPTICS AND LASER TECHNOLOGY (2013)
Contact Mechanics of Laser-Textured Surfaces
Nikolay Prodanov et al.
TRIBOLOGY LETTERS (2013)
Balancing Wedge Action: A Contribution of Textured Surface to Hydrodynamic Pressure Generation
Kazuyuki Yagi et al.
TRIBOLOGY LETTERS (2013)
Influence of Texture Geometry on the Hydrodynamic Performances of Parallel Bearings
A. R. Gherca et al.
TRIBOLOGY TRANSACTIONS (2013)
Characterization of Stiffness and Damping in Textured Sector Pad Micro Thrust Bearings Using Computational Fluid Dynamics
Christos I. Papadopoulos et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2012)
An isoviscous, isothermal model investigating the influence of hydrostatic recesses on a spring-supported tilting pad thrust bearing
Dennis V. De Pellegrin et al.
TRIBOLOGY INTERNATIONAL (2012)
Parametric study of texturing in convergent bearings
M. T. Fowell et al.
TRIBOLOGY INTERNATIONAL (2012)
Direct Observation of Cavitation Phenomenon and Hydrodynamic Lubrication Analysis of Textured Surfaces
Jinyu Zhang et al.
TRIBOLOGY LETTERS (2012)
Study on influence factors of bearing capacity of water-lubricated thrust bearing and its improving methods
Xia Zhang et al.
ADVANCED MECHANICAL DESIGN, PTS 1-3 (2012)
The effect of dimple shapes on friction of parallel surfaces
H. Yu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2011)
A Mass-Conserving Complementarity Formulation to Study Lubricant Films in the Presence of Cavitation
Matteo Giacopini et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2010)
Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach
M. B. Dobrica et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)
Development of a texture averaged Reynolds equation
A. de Kraker et al.
TRIBOLOGY INTERNATIONAL (2010)
Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting Surfaces
Haiwu Yu et al.
TRIBOLOGY LETTERS (2010)
Hydrodynamic Lubrication of Microdimple Textured Surface Using Three-Dimensional CFD
Jing Han et al.
TRIBOLOGY TRANSACTIONS (2010)
On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm
Y. Qiu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2009)
About the validity of Reynolds equation and inertia effects in textured sliders of infinite width
M. B. Dobrica et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Experimental studies of pressure distributions in finite slider bearing with single continuous surface profiles on the pads
R. K. Sharma et al.
TRIBOLOGY INTERNATIONAL (2009)
Influence of surface profile on slider bearing performance
R. K. Sharma et al.
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2008)
Thermohydrodynamic analysis of infinitely wide cycloidal profiled pad thrust bearing with rough surface and a comparison to plane profiled pad
R. K. Sharma et al.
LUBRICATION SCIENCE (2008)
The impact of the cavitation model in the analysis of microtextured lubricated journal bearings
Roberto Ausas et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)
Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water
XL Wang et al.
TRIBOLOGY INTERNATIONAL (2003)
The effect of laser texturing of SiC surface on the critical load for transition of water lubrication mode from hydrodynamic to mixed
XL Wang et al.
TRIBOLOGY INTERNATIONAL (2001)
Share Paper
