Related references
Note: Only part of the references are listed.Integrated 3D printed heaters for microfluidic applications: Ammonium analysis within environmental water
Elisenda Fornells et al.
ANALYTICA CHIMICA ACTA (2020)
An integrated microfluidic device for solid-phase extraction and spectrophotometric detection of opium alkaloids in urine samples
Ali Farahani et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2020)
3D printed microfluidic devices for circulating tumor cells (CTCs) isolation
Juhong Chen et al.
BIOSENSORS & BIOELECTRONICS (2020)
3D Printing for Electrochemical Energy Applications
Michelle P. Browne et al.
CHEMICAL REVIEWS (2020)
Gelatin Methacryloyl Microneedle Patches for Minimally Invasive Extraction of Skin Interstitial Fluid
Jixiang Zhu et al.
SMALL (2020)
Ultracompact 3D microfluidics for time-resolved structural biology
Juraj Knoska et al.
NATURE COMMUNICATIONS (2020)
Hollow Fiber Liquid-Phase Microextraction At-Line Coupled to Capillary Electrophoresis for Direct Analysis of Human Body Fluids
Blanka Mikova et al.
ANALYTICAL CHEMISTRY (2020)
A novel and potential chemical sensor for effective monitoring of Fe(II) ion in corrosion systems of water samples
Hassan M. A. Hassan et al.
MICROCHEMICAL JOURNAL (2020)
3D-Printed Soft Lithography for Complex Compartmentalized Microfluidic Neural Devices
Janko Kajtez et al.
ADVANCED SCIENCE (2020)
The global rise of 3D printing during the COVID-19 pandemic
Yu Ying Clarrisa Choong et al.
NATURE REVIEWS MATERIALS (2020)
3D Printed Microfluidic Devices for Solid-Phase Extraction and On-Chip Fluorescent Labeling of Preterm Birth Risk Biomarkers
Anna Bickham et al.
ANALYTICAL CHEMISTRY (2020)
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Ruitao Su et al.
SCIENCE ADVANCES (2020)
3D printing enables the rapid prototyping of modular microfluidic devices for particle conjugation
Steven A. Vasilescu et al.
APPLIED MATERIALS TODAY (2020)
Direct embedding and versatile placement of electrodes in 3D printed microfluidic-devices
Andre D. Castiaux et al.
ANALYST (2020)
Cell adhesion and proliferation on common 3D printing materials used in stereolithography of microfluidic devices
Kati Piironen et al.
LAB ON A CHIP (2020)
Fabrication of unconventional inertial microfluidic channels using wax 3D printing
Mohammad Amin Raoufi et al.
SOFT MATTER (2020)
A modular 3D printed lab-on-a-chip for early cancer detection
Alessandro Chiado et al.
LAB ON A CHIP (2020)
An integrated microfluidic device with solid-phase extraction and graphene oxide quantum dot array for highly sensitive and multiplex detection of trace metal ions
Minsu Park et al.
BIOSENSORS & BIOELECTRONICS (2019)
A novel thread-based microfluidic device for capillary electrophoresis with capacitively coupled contactless conductivity detection
Reverson Fernandes Quero et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Facile, Rapid, and Low-Cost Electrophoresis Titration of Thrombin by Aptamer-Linked Magnetic Nanoparticles and a Redox Boundary Chip
Hao Kong et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Extraction of Plant DNA by Microneedle Patch for Rapid Detection of Plant Diseases
Rajesh Paul et al.
ACS NANO (2019)
A Miniature 3D Printed LED-Induced Fluorescence Detector for Capillary Electrophoresis and Dual-Detector Taylor Dispersion Analysis
Laura D. Casto et al.
ANALYTICAL CHEMISTRY (2019)
3D-printed CuO nanoparticle-functionalized flow reactor enables online fluorometric monitoring of glucose
Cheng-Kuan Su et al.
MICROCHIMICA ACTA (2019)
Direct photoimmobilization of extraction disks on green state 3D printed devices
Carlos Calderilla et al.
TALANTA (2019)
A 3D printed centrifugal microfluidic platform for spilled oil enrichment and detection based on solid phase extraction (SPE)
Yong Zhang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
3D printed microfluidic devices with immunoaffinity monoliths for extraction of preterm birth biomarkers
Ellen K. Parker et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2019)
3D Printing: The Second Dawn of Lab-On-Valve Fluidic Platforms for Automatic (Bio)Chemical Assays
David J. Cocovi-Solberg et al.
ANALYTICAL CHEMISTRY (2019)
Column Characterization and Selection Systems in Reversed-Phase High-Performance Liquid Chromatography
Petar Zuvela et al.
CHEMICAL REVIEWS (2019)
3D-Printed Stationary Phases with Ordered Morphology: State of the Art and Future Development in Liquid Chromatography
Christopher Salmean et al.
CHROMATOGRAPHIA (2019)
Droplet-based PCR in a 3D-printed microfluidic chip for miRNA-21 detection
Zhiqiang Jiao et al.
ANALYTICAL METHODS (2019)
Integrating 3D cell culture of PC12 cells with microchip-based electrochemical detection
Benjamin T. Mehl et al.
ANALYTICAL METHODS (2019)
3D printed microfluidic device for online detection of neurochemical changes with high temporal resolution in human brain microdialysate
Isabelle C. Samper et al.
LAB ON A CHIP (2019)
Chemical analysis using 3D printed glass microfluidics
Eran Gal-Or et al.
ANALYTICAL METHODS (2019)
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Milena Nadgorny et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Insert-based microfluidics for 3D cell culture with analysis
Chengpeng Chen et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2018)
New 3D-printed sorbent for extraction of steroids from human plasma preceding LC-MS analysis
Lucyna Konieczna et al.
JOURNAL OF CHROMATOGRAPHY A (2018)
Biodegradable 3D printed polymer microneedles for transdermal drug delivery
Michael A. Luzuriaga et al.
LAB ON A CHIP (2018)
3D-printed, TiO2 NP-incorporated minicolumn coupled with ICP-MS for speciation of inorganic arsenic and selenium in high-salt-content samples
Cheng-Kuan Su et al.
MICROCHIMICA ACTA (2018)
Improving thermal control of capillary electrophoresis with mass spectrometry and capacitively coupled contactless conductivity detection by using 3D printed cartridges
Kelliton Jose Mendonca Francisco et al.
TALANTA (2018)
In-line carbon nanofiber reinforced hollow fiber-mediated liquid phase microextraction using a 3D printed extraction platform as a front end to liquid chromatography for automatic sample preparation and analysis: A proof of concept study
Chanatda Worawit et al.
TALANTA (2018)
Automated dispersive liquid-liquid microextraction based on the solidification of the organic phase
Deyber Arley Vargas Medina et al.
TALANTA (2018)
(Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
C. Lorena Manzanares Palenzuela et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2018)
Current and future impact of 3D printing on the separation sciences
Umme Kalsoom et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2018)
Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Ludovic Serex et al.
MICROMACHINES (2018)
FDM 3D Printing of High-Pressure, Heat-Resistant, Transparent Microfluidic Devices
Valentin Romanov et al.
ANALYTICAL CHEMISTRY (2018)
3D printed microfluidic chip for multiple anticancer drug combinations
Xiaojun Chen et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Opportunities for 3D printed millifluidic platforms incorporating on-line sample handling and separation
David J. Cocovi-Solberg et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2018)
Microfluidic-based solid phase extraction of cell free DNA
Camila D. M. Campos et al.
LAB ON A CHIP (2018)
Investigating the Effect of Column Geometry on Separation Efficiency using 3D Printed Liquid Chromatographic Columns Containing Polymer Monolithic Phases
Vipul Gupta et al.
ANALYTICAL CHEMISTRY (2018)
Recent Advances in Analytical Chemistry by 3D Printing
Bethany Gross et al.
ANALYTICAL CHEMISTRY (2017)
A Gas Chromatographic System for the Detection of Ethylene Gas Using Ambient Air as a Carrier Gas
Nayyer Abbas Zaidi et al.
SENSORS (2017)
3D printed device including disk-based solid-phase extraction for the automated speciation of iron using the multisyringe flow injection analysis technique
Carlos Calderilla et al.
TALANTA (2017)
3D-printed flow system for determination of lead in natural waters
Elodie Mattio et al.
TALANTA (2017)
Rapid prototyping using 3D printing in bioanalytical research
Chengsen Zhang et al.
BIOANALYSIS (2017)
Using Printing Orientation for Tuning Fluidic Behavior in Microfluidic Chips Made by Fused Deposition Modeling 3D Printing
Feng Li et al.
ANALYTICAL CHEMISTRY (2017)
3D-Printed Microflow Injection Analysis Platform for Online Magnetic Nanoparticle Sorptive Extraction of Antimicrobials in Biological Specimens as a Front End to Liquid Chromatographic Assays
Han Wang et al.
ANALYTICAL CHEMISTRY (2017)
A Printed Equilibrium Dialysis Device with Integrated Membranes for Improved Binding Affinity Measurements
Cody W. Pinger et al.
ANALYTICAL CHEMISTRY (2017)
Fused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications
Gert I. J. Salentijn et al.
ANALYTICAL CHEMISTRY (2017)
Microfluidic Capillaric Circuit for Rapid and Facile Bacteria Detection
Ayokunle Oluwafemi Olanrewaju et al.
ANALYTICAL CHEMISTRY (2017)
Dispersion behavior of 3D-printed columns with homogeneous microstructures comprising differing element shapes
Suhas Nawada et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Fundamentals and applications of 3D printing for novel materials
Jian-Yuan Lee et al.
APPLIED MATERIALS TODAY (2017)
3D printed LED based on-capillary detector housing with integrated slit
Farhan Cecil et al.
ANALYTICA CHIMICA ACTA (2017)
One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing
Feng Li et al.
ANALYTICAL CHEMISTRY (2017)
Fused Deposition Modeling Enables the Low-Cost Fabrication of Porous, Customized-Shape Sorbents for Small-Molecule Extraction
Mariusz Belka et al.
ANALYTICAL CHEMISTRY (2017)
3D-Printed Microfluidics
Anthony K. Au et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
High density 3D printed microfluidic valves, pumps, and multiplexers
Hua Gong et al.
LAB ON A CHIP (2016)
3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications
Alireza Ahmadian Yazdi et al.
MICROFLUIDICS AND NANOFLUIDICS (2016)
Chemical and biochemical analysis on lab-on-a-chip devices fabricated using three-dimensional printing
Yan Zhang et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2016)
Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater
Cheng-Kuan Su et al.
ANALYTICAL CHEMISTRY (2015)
Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
Jin-Feng Xing et al.
CHEMICAL SOCIETY REVIEWS (2015)
3D printed microfluidics for biological applications
Chee Meng Benjamin Ho et al.
LAB ON A CHIP (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
Seyed Farid Seyed Shirazi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Miniature 3D gas chromatography columns with integrated fluidic connectors using high-resolution stereolithography fabrication
F. Lucklum et al.
EUROSENSORS 2015 (2015)
Fabricated data bodies: Reflections on 3D printed digital body objects in medical and health domains
Deborah Lupton
SOCIAL THEORY & HEALTH (2015)
Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
Anthony K. Au et al.
LAB ON A CHIP (2014)
The present and future role of microfluidics in biomedical research
Eric K. Sackmann et al.
NATURE (2014)
Scalable Manufacture of Built-to-Order Nanomedicine: Spray-Assisted Layer-by-Layer Functionalization of PRINT Nanoparticles
Stephen W. Morton et al.
ADVANCED MATERIALS (2013)
Optimization of poly-di-methyl-siloxane (PDMS) substrates for studying cellular adhesion and motility
D. Fuard et al.
MICROELECTRONIC ENGINEERING (2008)
Analytical methods for polycyclic aromatic hydrocarbons (PAHs) in food and the environment needed for new food legislation in the European Union
Thomas Wenzl et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2006)
Lab-on-a-chip: microfluidics in drug discovery
PS Dittrich et al.
NATURE REVIEWS DRUG DISCOVERY (2006)
Microfluidic devices fabricated in poly(dimethylsiloxane) for biological studies
SK Sia et al.
ELECTROPHORESIS (2003)
Microfluidic large-scale integration
T Thorsen et al.
SCIENCE (2002)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
Single-channel microchip for fast screening and detailed identification of nitroaromatic explosives or organophosphate nerve agents
J Wang et al.
ANALYTICAL CHEMISTRY (2002)
Monolithic microfabricated valves and pumps by multilayer soft lithography
MA Unger et al.
SCIENCE (2000)