Related references
Note: Only part of the references are listed.Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application
Akarsh Verma et al.
POLYMER COMPOSITES (2020)
Characterization of solid char produced from pyrolysis of the organic fraction of municipal solid waste, high volatile coal and their blends
Diyar Tokmurzin et al.
ENERGY (2020)
Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel
V. L. Mangesh et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Pyrolysis of plastic waste: Opportunities and challenges
Muhammad Saad Qureshi et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)
The Application of a Novel Char Source From Petroleum Refining Waste in Flame Retardant Thermoplastic Polyurethane
Di Wang et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Raman spectroscopy of biochar from the pyrolysis of three typical Chinese biomasses: A novel method for rapidly evaluating the biochar property
Jun Xu et al.
ENERGY (2020)
Lab-scale pyrolysis and hydrothermal carbonization of biomass digestate: Characterization of solid products and compliance with biochar standards
Edoardo Miliotti et al.
BIOMASS & BIOENERGY (2020)
Cleaner utilization of non-metallic components in separation tailings of waste printed circuit board: Pyrolysis oil, calorific value and building aggregate
Chun-chen Nie et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Insight into the co-pyrolysis of different blended feedstocks to biochar for the adsorption of organic and inorganic pollutants: A review
M. J. Ahmed et al.
JOURNAL OF CLEANER PRODUCTION (2020)
High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions
Sharath P. Subadra et al.
POLYMER TESTING (2020)
A new industrial technology for closing the loop of full-size waste motherboards using chemical-ultrasonic-mechanical treatment
Samy Yousef et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
The effect of waste incineration taxation on industrial plastic waste generation: A panel analysis
Loic De Weerdt et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Legacy additives in a circular economy of plastics: Current dilemma, policy analysis, and emerging countermeasures
Swetlana Wagner et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
On the self-heating behavior of upgraded biochar pellets blended with pyrolysis oil: Effects of process parameters
Lorenzo Riva et al.
FUEL (2020)
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Yutao Zhang et al.
FUEL PROCESSING TECHNOLOGY (2020)
Characterization of post -consumer plastic film waste from mixed MSW in Spain: A key point for the successful implementation of sustainable plastic waste management strategies
Alberto Gala et al.
WASTE MANAGEMENT (2020)
Simultaneous production of mesoporous biochar and palmitic acid by pyrolysis of brewing industry wastes
Lauren M. M. Machado et al.
WASTE MANAGEMENT (2020)
Modeling of Metalized Food Packaging Plastics Pyrolysis Kinetics Using an Independent Parallel Reactions Kinetic Model
Samy Yousef et al.
POLYMERS (2020)
Conversion of end -of -life cotton banknotes into liquid fuel using mini-pyrolysis plant
Samy Yousef et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Superhydrophilic functionalized graphene/fiberglass/epoxy laminates with high mechanical, impact and thermal performance and treated by plasma
Samy Yousef et al.
POLYMER TESTING (2020)
Low velocity impact and pseudo-ductile behaviour of carbon/glass/epoxy and carbon/glass/PMMA hybrid composite laminates for aircraft application at service temperature
Sharath P. Subadra et al.
POLYMER TESTING (2020)
Exergy and energy analysis of pyrolysis of plastic wastes in rotary kiln with heat carrier
Yutao Zhang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Pyrolysis kinetic behavior and TG-FTIR-GC-MS analysis of metallised food packaging plastics
Samy Yousef et al.
FUEL (2020)
Mechanical properties of fibreglass and carbon-fibre reinforced polyetherimide after twenty years of outdoor environmental aging in the city of Gijon (Spain)
J. Vina et al.
COMPOSITES COMMUNICATIONS (2020)
A finite element method based comparative fracture assessment of carbon black and silica filled elastomers: Reinforcing efficacy of carbonaceous fillers in flexible composites
Mohit Goswami et al.
POLYMER TESTING (2020)
Towards a circular economy for plastic packaging wastes - the environmental potential of chemical recycling
Raoul Meys et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Analysis of biochar with different pyrolysis temperatures used as filler in epoxy resin composites
Mauro Giorcelli et al.
BIOMASS & BIOENERGY (2019)
Sustainable industrial technology for recovery of Al nanocrystals, Si micro particles and Ag from solar cell wafer production waste
Samy Yousef et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Pyrolysis of mixed municipal solid waste: Characterisation, interaction effect and kinetic modelling using the thermogravimetric approach
Vibhuti Chhabra et al.
WASTE MANAGEMENT (2019)
Implementation of fiberglass in carbon fiber composites as an isolation layer that enhances lightning strike protection
Yunli Guo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Optimization of the pyrolysis process of a plastic waste to obtain a liquid fuel using different mathematical models
L. Quesada et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Thermal behavior and kinetics study of carbon/epoxy resin composites
Yanying Xu et al.
POLYMER COMPOSITES (2019)
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Hsien H. Khoo
RESOURCES CONSERVATION AND RECYCLING (2019)
A sustainable bioenergy conversion strategy for textile waste with self-catalysts using mini-pyrolysis plant
Samy Yousef et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Catalytic microwave-assisted pyrolysis of plastic waste over NiO and HY for gasoline-range hydrocarbons production
Kuan Ding et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Effects of ozonized carbon black on fracture and post-cracking toughness of carbon fiber-reinforced epoxy composites
Seong Hwang Kim et al.
COMPOSITES PART B-ENGINEERING (2019)
Microwave-assisted pyrolysis of EFB-derived biochar as potential renewable solid fuel for power generation: Biochar versus sub-bituminous coal
Atiyyah Ameenah Azni et al.
RENEWABLE ENERGY (2019)
Sustainable technology for mass production of Ag nanoparticles and Al microparticles from damaged solar cell wafers
Samy Yousef et al.
WASTE MANAGEMENT (2019)
Effect of various carbon nanofillers and different filler aspect ratios on the thermal conductivity of epoxy matrix nanocomposites
Junjie Chen et al.
RESULTS IN PHYSICS (2019)
Optimization of process parameters for slow pyrolysis of neem press seed cake for liquid and char production
Kotaiah Naik Dhanavath et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)
Plastic pollutants: effective waste management for pollution control and abatement
Kunju Vaikarar Soundararajan Rajmohan et al.
CURRENT OPINION IN ENVIRONMENTAL SCIENCE & HEALTH (2019)
Reinforcing effects of functionalized graphene oxide on glass fiber/epoxy composites
Alireza Ashori et al.
POLYMER COMPOSITES (2018)
Impact behavior of carbon fiber/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment
Memduh Kara et al.
COMPOSITES PART B-ENGINEERING (2018)
Separation and purification of metal and fiberglass extracted from waste printed circuit boards using milling and dissolution techniques
Maksym Tatariants et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2018)
Sustainable approach to recycling of multilayer flexible packaging using switchable hydrophilicity solvents
Tamari Mumladze et al.
GREEN CHEMISTRY (2018)
Recycling of bare waste printed circuit boards as received using an organic solvent technique at a low temperature
Samy Yousef et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Cleaner and profitable industrial technology for full recovery of metallic and non-metallic fraction of waste pharmaceutical blisters using switchable hydrophilicity solvents
Samy Yousef et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Valorization of packaging plastic waste by slow pyrolysis
Pallab Das et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Thermal treatments for Biochar and their electrical characterization in epoxy resin composites
M. Giorcelli et al.
9TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY (2018)
Pyrolysis of waste high density polyethylene (HDPE) and low density polyethylene (LDPE) plastics and production of epoxy composites with their pyrolysis chars
Merve Sogancioglu et al.
JOURNAL OF CLEANER PRODUCTION (2017)
The effect of graphite and carbon black ratios on conductive ink performance
Chris Phillips et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Production of Epoxy Composite from the Pyrolysis Char of Washed PET Wastes
Merve Sogancioglu et al.
2017 2ND INTERNATIONAL CONFERENCE ON ADVANCES ON CLEAN ENERGY RESEARCH (ICACER 2017) (2017)
High-surface-area and high-nitrogen-content carbon microspheres prepared by a pre-oxidation and mild KOH activation for superior supercapacitor
Cheng Ma et al.
CARBON (2017)
Influence of functionalized graphene by grafted phosphorus containing flame retardant on the flammability of carbon fiber/epoxy resin (CF/ER) composite
Fei Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Optimal slow pyrolysis of apple pomace reaction conditions for the generation of a feedstock gas for hydrogen production
M. R. Baray Guerrero et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
The effects of feedstock pre-treatment and pyrolysis temperature on the production of biochar from the green seaweed Ulva
David A. Roberts et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)
An experimental study on mechanical properties of epoxy-matrix composites containing graphite filler
Ricardo Baptista et al.
XV PORTUGUESE CONFERENCE ON FRACTURE, PCF 2016 (2016)
Carbon black vs. black carbon and other airborne materials containing elemental carbon: Physical and chemical distinctions
Christopher M. Long et al.
ENVIRONMENTAL POLLUTION (2013)
Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties
H. P. S. Abdul Khalil et al.
MATERIALS & DESIGN (2010)
The interaction of epoxy resin and an additional electrolyte with non-oxidised carbon black in colloidal dispersions
T Prasse et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2001)
Share Paper
