Related references
Note: Only part of the references are listed.Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing
Sandra Petersmann et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Multi-Material 3D and 4D Printing: A Survey
Mohammad Rafiee et al.
ADVANCED SCIENCE (2020)
Tailored crystalline structure and enhanced impact strength of isotactic polypropylene/high-density polyethylene blend by controlling the printing speed of fused filament fabrication
Jie Leng et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Promotion of molecular diffusion and/or crystallization in fused deposition modeled poly(lactide) welds
Varun Srinivas et al.
POLYMER (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Mechanical properties of 3D parts fabricated by fused deposition modeling: Effect of various fillers in polylactide
Xia Gao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Morphology Evolutions and Mechanical Properties of In Situ Fibrillar Polylactic Acid/Thermoplastic Polyurethane Blends Fabricated by Fused Deposition Modeling
Jianye Wang et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Additive manufacturing for space: status and promises
Enea Sacco et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Assessment of Crystallinity Development during Fused Filament Fabrication through Fast Scanning Chip Calorimetry
Dries Vaes et al.
APPLIED SCIENCES-BASEL (2019)
In Situ Time-Resolved X-ray Scattering Study of Isotactic Polypropylene in Additive Manufacturing
Yuval Shmueli et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Preparation of Thermoplastic Polyurethane Parts Reinforced with in Situ Polylactic Acid Microfibers during Fused Deposition Modeling: The Influences of Deposition-Induced Effects
Jie Leng et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Melt crystallization of PLA/Talc in fused filament fabrication
Wangwang Yu et al.
MATERIALS & DESIGN (2019)
Structure Development in Polymers during Fused Filament Fabrication (FFF): An in Situ Small- and Wide-Angle X-ray Scattering Study Using Synchrotron Radiation
Aurora Nogales et al.
MACROMOLECULES (2019)
3D printed porous PLA/nHA composite scaffolds with enhanced osteogenesis and osteoconductivity in vivo for bone regeneration
Xibao Chen et al.
BIOMEDICAL MATERIALS (2019)
Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
Eric L. Gilmer et al.
POLYMER (2018)
Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing
Radoslaw A. Wach et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Shear-induced stereocomplex cylindrites in polylactic acid racemic blends: Morphology control and interfacial performance
Jia-Zhuang Xu et al.
POLYMER (2018)
Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides
Varun Srinivas et al.
POLYMER (2018)
Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
Jun Yin et al.
MATERIALS & DESIGN (2018)
Three-dimensional printing of hierarchical liquid-crystal-polymer structures
Silvan Gantenbein et al.
NATURE (2018)
Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing
Lily A. Northcutt et al.
POLYMER (2018)
3D printable thermoplastic polyurethane blends with thermal energy storage/release capabilities
D. Rigotti et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)
Claire Benwood et al.
ACS OMEGA (2018)
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Helge Klippstein et al.
ADVANCED ENGINEERING MATERIALS (2018)
Thicker Lamellae and Higher Crystallinity of Poly(lactic acid) via Applying Shear Flow and Pressure and Adding Poly(ethylene Glycol)
Jia-Feng Ru et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Supercooling-dependent morphology evolution of an organic nucleating agent in poly(L-lactide)/poly(D-lactide) blends
Sen-Qi Shen et al.
CRYSTENGCOMM (2017)
Shear-induced nonisothermal crystallization of two grades of PLA
Joanna Bojda et al.
POLYMER TESTING (2016)
Robust Interfacial Cylindrites of Polylactic Acid Modulated by an Intense Shear Flow Field
Yang Li et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Toward High-Performance Poly(L-lactide) Fibers via Tailoring Crystallization with the Aid of Fibrillar Nucleating Agent
Huixian Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Enhancing Thermomechanical Properties and Heat Distortion Resistance of Poly(L-lactide) with High Crystallinity under High Cooling Rate
Hai-Yan Yin et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
Tailoring Crystallization: Towards High-Performance Poly(lactic acid)
Guoming Liu et al.
ADVANCED MATERIALS (2014)
Multi-material, multi-technology FDM: exploring build process variations
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2014)
Rheologically Determined Critical Shear Rates for Shear-Induced Nucleation Rate Enhancements of Poly(lactic acid)
Yong Zhong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2013)
Shear Flow and Carbon Nanotubes Synergistically Induced Nonisothermal Crystallization of Poly(lactic acid) and Its Application in Injection Molding
Hu Tang et al.
BIOMACROMOLECULES (2012)
Spectroscopic Evidence of Melting of Ordered Structures in the Aged Glassy Poly(L-lactide)
Bing Na et al.
MACROMOLECULES (2010)
Conformational and microstructural characteristics of poly(L-lactide) during glass transition and physical aging
Pengju Pan et al.
JOURNAL OF CHEMICAL PHYSICS (2008)
Polymorphic transition in disordered poly(L-lactide) crystals induced by annealing at elevated temperatures
Pengju Pan et al.
MACROMOLECULES (2008)
Processing technologies for poly(lactic acid)
L-T Lim et al.
PROGRESS IN POLYMER SCIENCE (2008)
Crystallization and melting behavior of poly (L-lactic acid)
Takahiko Kawai et al.
MACROMOLECULES (2007)
Effect of nucleation and plasticization on the crystallization of poly(lactic acid)
Hongbo Li et al.
POLYMER (2007)
Plasticization of semicrystalline poly(L-lactide) with poly(propylene glycol)
E. Piorkowska et al.
POLYMER (2006)