Related references
Note: Only part of the references are listed.A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques
Patrycja Szymczyk-Ziolkowska et al.
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING (2020)
A Review on Additive Manufacturing of Shape-Memory Materials for Biomedical Applications
Nasim Sabahi et al.
JOM (2020)
Effects of thermal process parameters on mechanical interlayer strength for additively manufactured Ultem 9085
Travis E. Shelton et al.
POLYMER TESTING (2020)
4D printed shape memory polymers and their structures for biomedical applications
YueJia Li et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
S. Garzon-Hernandez et al.
MATERIALS & DESIGN (2020)
Current status and future directions of fused filament fabrication
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
3D printing in tissue engineering: a state of the art review of technologies and biomaterials
Nataraj Poomathi et al.
RAPID PROTOTYPING JOURNAL (2020)
Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling
Carola Esposito Corcione et al.
CERAMICS INTERNATIONAL (2019)
Assessment of Crystallinity Development during Fused Filament Fabrication through Fast Scanning Chip Calorimetry
Dries Vaes et al.
APPLIED SCIENCES-BASEL (2019)
Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing
Hongzhi Wu et al.
MATERIALS & DESIGN (2019)
3D and 4D Printing of Polymers for Tissue Engineering Applications
Dilara Goksu Tamay et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)
Modeling of surface roughness based on heat transfer considering diffusion among deposition filaments for FDM 3D printing heat-resistant resin
Peng Wang et al.
APPLIED THERMAL ENGINEERING (2019)
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2019)
High-Strain Shape Memory Behavior of PLA-PEG Multiblock Copolymers and Its Microstructural Origin
Wasin Koosomsuan et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2019)
Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems
Dana da Silva et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Systematic characterization of 3D-printed PCL/β-TCP scaffolds for biomedical devices and bone tissue engineering: Influence of composition and porosity
Amaud Bruyas et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Diana Popescu et al.
POLYMER TESTING (2018)
Biocompatibility of polymer-based biomaterials and medical devices - regulations, in vitro screening and risk-management
Melisande Bernard et al.
BIOMATERIALS SCIENCE (2018)
The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
Adrian Rodriguez-Panes et al.
MATERIALS (2018)
What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
Chad Duty et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
The effect of plasticizer on the shape memory properties of poly(lactide acid)/poly(ethylene glycol) blends
Yijun Guo et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens
Marzio Grasso et al.
RAPID PROTOTYPING JOURNAL (2018)
A Review on 3D Printable Techniques for Tissue Engineering
Sharda Gupta et al.
BIONANOSCIENCE (2018)
Review of additive manufactured tissue engineering scaffolds: relationship between geometry and performance
Andrew Gleadall et al.
BURNS & TRAUMA (2018)
3D printing of PLGA scaffolds for tissue engineering
Anton V. Mironov et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Shape memory effect in 3D-printed scaffolds for self-fitting implants
F. S. Senatov et al.
EUROPEAN POLYMER JOURNAL (2017)
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Jin-Hyung Shim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
3D printing of hydroxyapatite polymer-based composites for bone tissue engineering
Carola Esposito Corcione et al.
JOURNAL OF POLYMER ENGINEERING (2017)
Room temperature deformable shape memory composite with fine-tuned crystallization induced via nanoclay particles
Yu-Chen Sun et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)
Thermally induced shape memory behavior, enzymatic degradation and biocompatibility of PLA/TPU blends: Effects of compatibilization
S. K. Dogan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
4D printing of polymeric materials for tissue and organ regeneration
Shida Miao et al.
MATERIALS TODAY (2017)
Biodegradable Shape Memory Polymers in Medicine
Gregory I. Peterson et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Biocompatible, degradable thermoplastic polyurethane based on polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone copolymers for soft tissue engineering
Hao-Yang Mi et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Toward the low actuation temperature of flexible shape memory polymer composites with room temperature deformability via induced plasticizing effect
Shenyang Cai et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Material issues in additive manufacturing: A review
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
3D-Printed Poly(ε-caprolactone) Scaffold Integrated with Cell-laden Chitosan Hydrogels for Bone Tissue Engineering
Liang Dong et al.
SCIENTIFIC REPORTS (2017)
Toward improvement of the properties of parts manufactured by FFF (Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon
Bakrani Balani Shahriar et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Multi-layered scaffolds production via Fused Deposition Modeling (FDM) using an open source 3D printer: process parameters optimization for dimensional accuracy and design reproducibility
E. Ceretti et al.
3RD CIRP CONFERENCE ON BIOMANUFACTURING (2017)
Additive manufacturing techniques and their biomedical applications
Yujing Liu et al.
FAMILY MEDICINE AND COMMUNITY HEALTH (2017)
Towards 4D printed scaffolds for tissue engineering: exploiting 3D shape memory polymers to deliver time-controlled stimulus on cultured cells
Wilhelmus J. Hendrikson et al.
BIOFABRICATION (2017)
Scaffolds and cells for tissue regeneration: different scaffold pore sizes-different cell effects
Ieva Bruzauskaite et al.
CYTOTECHNOLOGY (2016)
Additive manufacturing methods and modelling approaches: a critical review
H. Bikas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Multiresponsive Shape Memory Blends and Nanocomposites Based on Starch
Valentina Sessini et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Design of Poly(L-lactide)-Poly(ethylene glycol) Copolymer with Light-Induced Shape-Memory Effect Triggered by Pendant Anthracene Groups
Hui Xie et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Cold atmospheric plasma (CAP) surface nanomodified 3D printed polylactic acid (PLA) scaffolds for bone regeneration
Mian Wang et al.
ACTA BIOMATERIALIA (2016)
Poly(lactic acid) blends in biomedical applications
P. Saini et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Polylactic acid (PLA) controlled delivery carriers for biomedical applications
Betty Tyler et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications
Chao-Chung Kuo et al.
COMPOSITES PART B-ENGINEERING (2016)
PGA-incorporated collagen: Toward a biodegradable composite scaffold for bone-tissue engineering
Shirin Toosi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)
Influence of internal pore architecture on biological and mechanical properties of three-dimensional fiber deposited scaffolds for bone regeneration
Barbara Ostrowska et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)
Polyetheretherketone (PEEK) for medical applications
Ivan Vladislavov Panayotov et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)
Design, analysis and fabrication of polyamide/hydroxyapatite porous structured scaffold using selective laser sintering method for bio-medical applications
T. Kumaresan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: The effect of layer penetration and post-heating
S. Naghieh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
F. S. Senatov et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Tailor-made poly(L-lactide)/poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds prepared via high-pressure compression molding/salt leaching
Jin Zhang et al.
RSC ADVANCES (2016)
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Ashu Garg et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Manufacture and characterisation of porous PLA scaffolds
Natacha Rodrigues et al.
SECOND CIRP CONFERENCE ON BIOMANUFACTURING (2016)
The impact of temperature changing on surface roughness of FFF process
D. Chaidas et al.
20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016) (2016)
Influence of inter-layer cooling time on the quasi-static properties of ABS components produced via Fused Deposition Modelling
M. Faes et al.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII) (2016)
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Chia-Tze Kao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Extrusion-based additive manufacturing of PEEK for biomedical applications
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Biodegradable polyester-based shape memory polymers: Concepts of (supra)molecular architecturing
J. Karger-Kocsis et al.
EXPRESS POLYMER LETTERS (2014)
Shape-Memory Performance of Thermoplastic Amphiphilic Triblock Copolymer Poly(D,L-lactic acid-co-ethylene glycol-co-D,L-lactic acid) (PELA)/Hydroxyapatite Composites
Artem B. Kutikov et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2014)
Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing
W. Z. Wu et al.
MATERIALS RESEARCH INNOVATIONS (2014)
Synthesis and Characterization of Poly(Methyl Methacrylate) PMMA and Evaluation of Cytotoxicity for Biomedical Application
Paulo E. Feuser et al.
MACROMOLECULAR SYMPOSIA (2014)
High-resolution PLA-based composite scaffolds via 3-D printing technology
T. Serra et al.
ACTA BIOMATERIALIA (2013)
Surface roughness prediction in fused deposition modelling by neural networks
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Shape memory properties of melt-blended polylactic acid (PLA)/thermoplastic polyurethane (TPU) bio-based blends
S. -M. Lai et al.
JOURNAL OF POLYMER RESEARCH (2013)
Nano-hydroxyapatite reinforced polyhydroxybutyrate composites: A comprehensive study on the structural and in vitro biological properties
Mehdi Sadat-Shojai et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
3D printed PLA-based scaffolds A versatile tool in regenerative medicine
Tiziano Serra et al.
ORGANOGENESIS (2013)
Bioactive Surface Modification of Hydroxyapatite
Yasuhiko Abe et al.
BIOMED RESEARCH INTERNATIONAL (2013)
Preparation and cytocompatibility of polylactic acid/hydroxyapatite/graphene oxide nanocomposite fibrous membrane
Ma HaiBin et al.
CHINESE SCIENCE BULLETIN (2012)
Modelling micro geometrical profiles in fused deposition process
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Scaffolds for bone tissue engineering fabricated from two different materials by the rapid prototyping technique: PCL versus PLGA
So Hee Park et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Sterculia crosslinked PVA and PVA-poly(AAm) hydrogel wound dressings for slow drug delivery: Mechanical, mucoadhesive, biocompatible and permeability properties
Baljit Singh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
pH-Induced Shape-Memory Polymers
Xiao-Juan Han et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2012)
Suitability of PLA/TCP for fused deposition modeling
Dietmar Drummer et al.
RAPID PROTOTYPING JOURNAL (2012)
Alginate: Properties and biomedical applications
Kuen Yong Lee et al.
PROGRESS IN POLYMER SCIENCE (2012)
Determination of Shape Fixity and Shape Recovery Rate of Carbon Nanotube-filled Shape Memory Polymer Nanocomposites
Shahrul Azam Abdullah et al.
INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS 2012 (IRIS 2012) (2012)
Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering
Su A. Park et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2011)
Biomedical Applications of Biodegradable Polymers
Bret D. Ulery et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Bioinspired Mechanically Adaptive Polymer Nanocomposites with Water-Activated Shape-Memory Effect
Julie Mendez et al.
MACROMOLECULES (2011)
Biomaterials & scaffolds for tissue engineering
Fergal J. O'Brien
MATERIALS TODAY (2011)
Polymeric Scaffolds in Tissue Engineering Application: A Review
Brahatheeswaran Dhandayuthapani et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2011)
Biodegradable shape-memory block co-polymers for fast self-expandable stents
Liang Xue et al.
BIOMATERIALS (2010)
A biodegradable porous composite scaffold of PGA/β-TCP for bone tissue engineering
Hong Cao et al.
BONE (2010)
Effect of Thermal Degradation of SFF-Based PLGA Scaffolds Fabricated Using a Multi-head Deposition System Followed by Change of Cell Growth Rate
Jin-Hyung Shim et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2010)
Biomedical applications of thermally activated shape memory polymers
Ward Small et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Doxorubicin loaded PVA coated iron oxide nanoparticles for targeted drug delivery
S. Kayal et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Physicochemical characterisation of degrading polycaprolactone scaffolds
Lucy A. Bosworth et al.
POLYMER DEGRADATION AND STABILITY (2010)
New PMMA-co-EHA glass-filled composites for biomedical applications: Mechanical properties and bioactivity
Poliana Lopes et al.
ACTA BIOMATERIALIA (2009)
Synthesis and characterization of collagen/hyaluronan/chitosan composite sponges for potential biomedical applications
Yen-Chih Lin et al.
ACTA BIOMATERIALIA (2009)
Evaluation of chondrocyte growth in the highly porous scaffolds made by fused deposition manufacturing (FDM) filled with type II collagen
Hung-Jen Yen et al.
BIOMEDICAL MICRODEVICES (2009)
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
L. M. Galantucci et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
A biodegradable shape-memory nanocomposite with excellent magnetism sensitivity
Xiongjun Yu et al.
NANOTECHNOLOGY (2009)
Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer
Wei Zhang et al.
POLYMER (2009)
Nanofibrous poly(lactic acid)/hydroxyapatite composite scaffolds for guided tissue regeneration
Sung In Jeong et al.
MACROMOLECULAR BIOSCIENCE (2008)
Development of 3-D nanofibrous fibroin scaffold with high porosity by electrospinning: implications for bone regeneration
Chang Seok Ki et al.
BIOTECHNOLOGY LETTERS (2008)
Comparison of the degradation of polycaprolactone and polycaprolactone-(β-tricalcium phosphate) scaffolds in alkaline medium
Christopher X. F. Lam et al.
POLYMER INTERNATIONAL (2007)
Shape-memory polymers
Marc Behl et al.
MATERIALS TODAY (2007)
A model research for prototype warp deformation in the FDM process
Tian-Ming Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
The future prospects of microbial cellulose in biomedical applications
Wojciech K. Czaja et al.
BIOMACROMOLECULES (2007)
Review of progress in shape-memory polymers
C. Liu et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
A comparative analysis of scaffold material modifications for load-bearing applications in bone tissue engineering
H. Chim et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2006)
Shape memory properties of poly(D,L-lactide)/hydroxyapatite composites
Xiaotong Zheng et al.
BIOMATERIALS (2006)
Polymers move in response to light
Hongyan Jiang et al.
ADVANCED MATERIALS (2006)
Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering
LM Mathieu et al.
BIOMATERIALS (2006)
Understanding the biodegradation of polyurethanes: From classical implants to tissue engineering materials
JP Santerre et al.
BIOMATERIALS (2005)
A new biotechnology for articular cartilage repair: subchondral implantation of a composite of interconnected porous hydroxyapatite, synthetic polymer (PLA-PEG), and bone morphogenetic protein-2 (rhBMP-2)
N Tamai et al.
OSTEOARTHRITIS AND CARTILAGE (2005)
Direct synthesis of poly(D,L-lactic acid) by melt polycondensation and its application in drug delivery
YM Zhao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
In vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering
LB Wu et al.
BIOMATERIALS (2004)
In vitro evaluation of novel bioactive composites based on Bioglass®-filled polylactide foams for bone tissue engineering scaffolds
JJ Blaker et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Preparation and characterization of biodegradable PLA polymeric blends
CC Chen et al.
BIOMATERIALS (2003)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
The design of scaffolds for use in tissue engineering. Part 1. Traditional factors
SF Yang et al.
TISSUE ENGINEERING (2001)
Biomedical applications of collagen
CH Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2001)
Effects of mechanical forces on maintenance and adaptation of form in trabecular bone
R Huiskes et al.
NATURE (2000)
Share Paper
