Related references
Note: Only part of the references are listed.Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Influence of sub-cell structure on the mechanical properties of AlSi10Mg manufactured by laser powder bed fusion
A. Kempf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
Ruidi Li et al.
ACTA MATERIALIA (2020)
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties
C. Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Effects of TiC content on microstructure and mechanical properties of nickel-based hastelloy X nanocomposites manufactured by selective laser melting
Quanquan Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Compression behaviour of quasicrystal/Al composite with powder mixture driven layered microstructure prepared by selective laser melting
J. L. Lu et al.
OPTICS AND LASER TECHNOLOGY (2020)
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting
Pei Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites
Xuan Zhao et al.
VACUUM (2019)
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
Dongdong Gu et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of SiC particle size on mechanical properties of SiC particle reinforced aluminum metal matrix composite
Tengke Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure of selective laser melted AlSi10Mg alloy
Xihe Liu et al.
MATERIALS & DESIGN (2019)
Simultaneous refinement and modification of the eutectic Si in hypoeutectic Al-Si alloys achieved via the addition of SiC nanoparticles
Dapeng Jiang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
W. H. Yu et al.
PROGRESS IN MATERIALS SCIENCE (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Influence of processing parameters on selective laser melted SiCp/AlSi10Mg composites: Densification, microstructure and mechanical properties
Gang Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting
Min Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
Bandar AlMangour et al.
COMPOSITES PART B-ENGINEERING (2019)
Characterization of hardness, elastic modulus and fracture toughness of RB-SiC ceramics at elevated temperature by Vickers test
Xiaoshuang Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy
Min Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and synergistic-strengthening efficiency of CNTs-SiCp dual-nano reinforcements in aluminum matrix composites
Xin Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Y. J. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A novel strengthening effect of in-situ nano Al2O3w on CNTs reinforced aluminum matrix nanocomposites and the matched strengthening mechanisms
Xin Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
Kun V. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting
Bandar AlMangour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
Donghua Dai et al.
OPTICS AND LASER TECHNOLOGY (2018)
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
Donghua Dai et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
Bandar AlMangour et al.
MATERIALS & DESIGN (2018)
Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
Kun V. Yang et al.
MATERIALS & DESIGN (2018)
Effect of process parameters on the density and porosity of laser melted AlSi10Mg/SiC metal matrix composite
Omotoyosi H. Famodimu et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Al4SiC4 vibrational properties: density functional theory calculations compared to Raman and infrared spectroscopy measurements
L. Pedesseau et al.
JOURNAL OF RAMAN SPECTROSCOPY (2017)
Selective laser melting of advanced Al-Al2O3 nanocomposites: Simulation, microstructure and mechanical properties
Quanquan Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
K. G. Prashanth et al.
MATERIALS RESEARCH LETTERS (2017)
On the Breakdown of SiC during the Selective Laser Melting of Aluminum Matrix Composites
Lachlan Connor Astfalck et al.
ADVANCED ENGINEERING MATERIALS (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites
B. Chen et al.
CARBON (2017)
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Jyoti Suryawanshi et al.
ACTA MATERIALIA (2016)
Investigation of Interfacial Reaction Products and Stress Distribution in Selective Laser Melted Al12Si/SiC Composite Using Confocal Raman Microscopy
Xiaopeng Li et al.
ADVANCED ENGINEERING MATERIALS (2016)
Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting
Bandar AlMangour et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
Dongdong Gu et al.
SCRIPTA MATERIALIA (2015)
Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size
Fei Chang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles
A. J. Knowles et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing
X. J. Wang et al.
MATERIALS & DESIGN (2014)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process
Subrata Kumar Ghosh et al.
MATERIALS & DESIGN (2011)
Preparation, microstructures and deformation behavior of SiCP/6066Al composites produced by PM route
N. P. Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
A model for the abrasive wear behaviour of aluminium based composites
Y. Sahin et al.
MATERIALS & DESIGN (2008)
Effect of SiC particles on the laser sintering of Al-7Si-0.3Mg alloy
A. Simchi et al.
SCRIPTA MATERIALIA (2008)
Microstructure and wear studies of laser clad Al-Si/SiC(p) composite coatings
R. Anandkumar et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Sintering of commercially pure titanium powder with a Nd:YAG laser source
P Fischer et al.
ACTA MATERIALIA (2003)
Lasers and materials in selective laser sintering
JP Kruth et al.
ASSEMBLY AUTOMATION (2003)
Thermo-mechanical stability of wide-bandgap semiconductors: high temperature hardness of SiC, AIN, GaN, ZnO and ZnSe
I Yonenaga
PHYSICA B-CONDENSED MATTER (2001)
Share Paper
