Related references
Note: Only part of the references are listed.Abilities of porous materials for energy saving in advanced thermal systems
Saman Rashidi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)
Quantifying Oil-Recovery Mechanisms during Natural-Gas Huff 'n' Puff Experiments on Ultratight Core Plugs
Son Tran et al.
SPE JOURNAL (2021)
Numerical study on the application of biodiesel and bioethanol in a multiple injection diesel engine
Asgar Asadi et al.
RENEWABLE ENERGY (2020)
Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid
Mohammad Reza Saffarian et al.
RENEWABLE ENERGY (2020)
CFD study of heat transfer and fluid flow in a parabolic trough solar receiver with internal annular porous structure and synthetic oile-Al2O3 nanofluid
Mehdi Vahabzadeh Bozorg et al.
RENEWABLE ENERGY (2020)
A new design of induced-charge electrokinetic micromixer with corrugated walls and conductive plate installation
Soroush Najjaran et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)
Numerical study on thermal-hydraulic performance and exergy analysis of laminar oil flow in a circular tube with fluid exchanger inserts
Peng Liu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Heat transfer and entropy generation analysis in a three-dimensional impinging jet porous heat sink under local thermal non-equilibrium condition
Mohammad Reza Salimi et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Heat-transfer analysis of a transitional boundary layer over a concave surface with Gortler vortices by means of direct numerical simulations
M. Mendez et al.
PHYSICS OF FLUIDS (2020)
The effect of alcohol-gasoline fuel blends on the engines' performances and emissions
Wanli Liu et al.
FUEL (2020)
Two-phase flow boiling in a microfluidic channel at high mass flux
Chanyoot Keepaiboon et al.
PHYSICS OF FLUIDS (2020)
Quantification of convective and diffusive transport during CO2 dissolution in oil: A numerical and analytical study
Mohammad Hossein Doranehgard et al.
PHYSICS OF FLUIDS (2020)
Numerical simulation of the heterogeneous combustion of dust clouds containing polydisperse porous iron particles
Mehdi Vahabzadeh Bozorg et al.
ENERGY (2020)
Generation of entropy during forced convection of heat in nanofluid stagnation-point flows over a cylinder embedded in porous media
Sina Rezaei Gomari et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2019)
Mixing process and mass transfer in a novel design of induced-charge electrokinetic micromixer with a conductive mixing-chamber
Morteza Nazari et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
A comprehensive analysis and empirical correlations for Nusselt number, friction factor and exergy destruction of helical tube equipped with spring-wire
Samira Pourhedayat et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Predicting entropy generation of a hybrid nanofluid containing graphene-platinum nanoparticles through a microchannel liquid block using neural networks
Raouf Khosravi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)
Numerical analysis of mixed convection of two-phase non-Newtonian nanofluid flow inside a partially porous square enclosure with a rotating cylinder
Majid Siavashi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Analysis of spectral radiative entropy generation in a non-gray planar participating medium at radiative equilibrium with two different boundary conditions
Asadollah Bahrami et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Spatial Entropy Generation Analysis for the Design Improvement of a Single Slope Solar Still
Saman Rashidi et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2018)
A review on the application, simulation, and experiment of the electrokinetic mixers
Saman Rashidi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Capturing Geometry for Labeling and Mapping Built Infrastructure: An Overview of Technologies
Abbas Rashidi et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2017)
Thermodynamics Analyses of Porous Microchannels With Asymmetric Thick Walls and Exothermicity: An Entropic Model of Microreactors
Alexander Elliott et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2017)
Effect of flap installation on improving the homogeneity of the mixture in an induced-charge electrokinetic micro-mixer
Zeynab Kazemi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)
On the effects of internal heat sources upon forced convection in porous channels with asymmetric thick walls
Alexander Elliott et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)
A thermodynamic analysis of forced convection through porous media using pore scale modeling
Mehrdad Torabi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Combined effects of streaming potential and wall slip on flow and heat transfer in microchannels
D. K. Tan et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)
Numerical study of mixing and heat transfer in mixed electroosmotic/pressure driven flow through T-shaped microchannels
Saman Ebrahimi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Numerical study of flow around and through a porous diamond cylinder in different apex angles
Saman Rashidi et al.
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2014)
Magnetohydrodynamics Flow and Heat Transfer Around a Solid Cylinder Wrapped With a Porous Ring
Mohammad Sadegh Valipour et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2014)
Thermal characteristics of electroosmotic flow in a wavy-wall microtube
Bae-Woei Liaw et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2011)
Pressure-driven electrokinetic slip-flow in planar microchannels
J. Jamaati et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)
Investigation of heat transfer and exergy loss in a concentric double pipe exchanger equipped with swirl generators
EK Akpinar et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2005)