Related references
Note: Only part of the references are listed.Simulating the distribution of electrochemical characteristics: A case study of 4.35 V LiCoO2/graphite pouch cell
Siqi Tang et al.
ELECTROCHIMICA ACTA (2020)
An Electro-chemo-thermo-mechanical Coupled Three-dimensional Computational Framework for Lithium-ion Batteries
Xiaoxuan Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Evaluation of convective heat transfer coefficient and specific heat capacity of a lithium-ion battery using infrared camera and lumped capacitance method
Xiaoxuan Zhang et al.
JOURNAL OF POWER SOURCES (2019)
A review on modeling of electro-chemo-mechanics in lithium-ion batteries
Ying Zhao et al.
JOURNAL OF POWER SOURCES (2019)
Fabrication of Low-Tortuosity Ultrahigh-Area-Capacity Battery Electrodes through Magnetic Alignment of Emulsion-Based Slurries
Linsen Li et al.
ADVANCED ENERGY MATERIALS (2019)
Systematic parameter acquisition method for electrochemical model of 4.35 V LiCoO2 batteries
Siqi Tang et al.
SOLID STATE IONICS (2019)
Direct Determination of Diffusion Coefficients in Commercial Li-Ion Batteries
Maria Angeles Cabanero et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
LiCoO2 particle size distribution as a function of the state of health of discarded cell phone batteries
Fernando Henrique Pavoni et al.
POWDER TECHNOLOGY (2018)
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Xuning Feng et al.
ENERGY STORAGE MATERIALS (2018)
An Inverse Method for Estimating the Electrochemical Parameters of Lithium-Ion Batteries II: Implementation
Barzin Rajabloo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Intercalation Driven Porosity Effects in Coupled Continuum Models for the Electrical, Chemical, Thermal and Mechanical Response of Battery Electrode Materials
Z. Wang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Elastic properties of lithium cobalt oxide (LiCoO2)
Eric Jianfeng Cheng et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
Modeling Crack Growth during Li Extraction in Storage Particles Using a Fracture Phase Field Approach
Markus Klinsmann et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes
Xiaoxuan Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Characterising the structural properties of polymer separators for lithium-ion batteries in 3D using phase contrast X-ray microscopy
Donal P. Finegan et al.
JOURNAL OF POWER SOURCES (2016)
A New Method to Model the Thickness Change of a Commercial Pouch Cell during Discharge
Bernhard Rieger et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Modeling crack growth during Li insertion in storage particles using a fracture phase field approach
Markus Klinsmann et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Electrochemomechanics of Electrodes in Li-Ion Batteries: A Review
Rong Xu et al.
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2016)
Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery
B. Rieger et al.
JOURNAL OF ENERGY STORAGE (2016)
The transformation of graphite electrode materials in lithium-ion batteries after cycling
Kehua Dai et al.
JOURNAL OF POWER SOURCES (2015)
Molecular dynamics simulation of lithium ion diffusion in LiCoO2 cathode material
R. Fallahzadeh et al.
SOLID STATE IONICS (2015)
Tool for Tortuosity Estimation in Lithium Ion Battery Porous Electrodes
Martin Ebner et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
A reaction-controlled diffusion model for the lithiation of silicon in lithium-ion batteries
Xiaoxuan Zhang et al.
EXTREME MECHANICS LETTERS (2015)
A Computational Model of the Mechanical Behavior within Reconstructed LixCoO2 Li-ion Battery Cathode Particles
Veruska Malave et al.
ELECTROCHIMICA ACTA (2014)
Real-time displacement and strain mappings of lithium-ion batteries using three-dimensional digital image correlation
P. K. Leung et al.
JOURNAL OF POWER SOURCES (2014)
Simulation and analysis of stress in a Li-ion battery with a blended LiMn2O4 and LiNi0.8Co0.15Al0.05O2 cathode
Yiling Dai et al.
JOURNAL OF POWER SOURCES (2014)
Stress evolution and capacity fade in constrained lithium-ion pouch cells
John Cannarella et al.
JOURNAL OF POWER SOURCES (2014)
Rate dependence of swelling in lithium-ion cells
Ki-Yong Oh et al.
JOURNAL OF POWER SOURCES (2014)
Measurement of Tortuosity and Porosity of Porous Battery Electrodes
Tyler DuBeshter et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Efficient Reformulation of Solid Phase Diffusion in Electrochemical-Mechanical Coupled Models for Lithium-Ion Batteries: Effect of Intercalation Induced Stresses
Sumitava De et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
An Efficient Parallelizable 3D Thermoelectrochemical Model of a Li-Ion Cell
Jake Christensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Studying the Kinetics of Crystalline Silicon Nanoparticle Lithiation with In Situ Transmission Electron Microscopy
Matthew T. McDowell et al.
ADVANCED MATERIALS (2012)
Thermomechanical analysis and durability of commercial micro-porous polymer Li-ion battery separators
Corey T. Love
JOURNAL OF POWER SOURCES (2011)
Algorithms for Advanced Battery-Management Systems MODELING, ESTIMATION, AND CONTROL CHALLENGES FOR LITHIUM-ION BATTERIES
Nalin A. Chaturvedi et al.
IEEE CONTROL SYSTEMS MAGAZINE (2010)
Lithium Diffusion in Graphitic Carbon
Kristin Persson et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)
A review of conduction phenomena in Li-ion batteries
Myounggu Park et al.
JOURNAL OF POWER SOURCES (2010)
Modeling Diffusion-Induced Stress in Li-Ion Cells with Porous Electrodes
Jake Christensen
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Determination of Activation Energy for Li Ion Diffusion in Electrodes
Masashi Okubo et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2009)
Quantifying tortuosity in porous Li-ion battery materials
Indrajeet V. Thorat et al.
JOURNAL OF POWER SOURCES (2009)
Mathematical Model Reformulation for Lithium-Ion Battery Simulations: Galvanostatic Boundary Conditions
Venkat R. Subramanian et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Modeling side reactions and nonisothermal effects in nickel metal-hydride batteries
Paul Albertus et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Study of germanium as electrode in thin-film battery
B. Laforge et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
High-performance lithium battery anodes using silicon nanowires
Candace K. Chan et al.
NATURE NANOTECHNOLOGY (2008)
Stress generation and fracture in lithium insertion materials
J Christensen et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2006)
A mathematical model of stress generation and fracture in lithium manganese oxide
J Christensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Graphite thermal expansion relationship for different temperature ranges
DKL Tsang et al.
CARBON (2005)
Efficient macro-micro scale coupled modeling of batteries
VR Subramanian et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces
C Monroe et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Effect of porosity on the capacity fade of a lithium-ion battery - Theory
G Sikha et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
A mathematical model for the lithium-ion negative electrode solid electrolyte interphase
J Christensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)
Effect of anode film resistance on the charge/discharge capacity of a lithium-ion battery
J Christensen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Dendrite growth in lithium/polymer systems - A propagation model for liquid electrolytes under galvanostatic conditions
C Monroe et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Battery dimensional changes occurring during charge/discharge cycles - thin rectangular lithium ion and polymer cells
JH Lee et al.
JOURNAL OF POWER SOURCES (2003)
Computer simulations of a lithium-ion polymer battery and implications for higher capacity next-generation battery designs
M Doyle et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Thermal modeling of porous insertion electrodes
KE Thomas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Structural and electronic properties of lithium intercalated graphite LiC6
KR Kganyago et al.
PHYSICAL REVIEW B (2003)
Share Paper
