Related references
Note: Only part of the references are listed.The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
Corrosion behavior of austenitic 304L and 316LN stainless steel clad reinforcing bars in cracked concrete
Ibrahim G. Ogunsanya et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)
Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting
Xiao-qing Ni et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Effect of prior plastic deformation and deformation rate on the corrosion resistance of AISI 321 austenitic stainless steel
A. A. Tiamiyu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The corrosion behavior and mechanism of X65 steel induced by iron-oxidizing bacteria in the seawater environment
Yongyong Yue et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)
Comparative study on microstructure and corrosion performance of 316 stainless steel prepared by laser melting deposition with ring-shaped beam and Gaussian beam
Jianbo Lei et al.
OPTICS AND LASER TECHNOLOGY (2019)
Improved corrosion resistance of 316LN stainless steel performed by rotationally accelerated shot peening
Xudong Chen et al.
APPLIED SURFACE SCIENCE (2019)
Wear anisotropy of selective laser melted 316L stainless steel
Y. Yang et al.
WEAR (2019)
Surface treatment and corrosion behavior of 316L stainless steel fabricated by selective laser melting
Shasha Lv et al.
MATERIALS RESEARCH EXPRESS (2019)
Microstructural evolution and chemical corrosion of electron beam wire-feed additively manufactured AISI 304 stainless steel
S. Yu Tarasov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of hydrogen and stress on the electrochemical and passivation behaviour of 304 stainless steel in simulated PEMFC environment
Xian-Zong Wang et al.
ELECTROCHIMICA ACTA (2019)
Effect of misorientation angle of grain boundary on the interaction with Σ3 boundary at crystal/melt interface of multicrystalline silicon
Lu-Chung Chuang et al.
MATERIALIA (2019)
A fractal approach to predict the oxidation and corrosion behavior of a grain boundary engineered low SFE high entropy alloy
R. J. Vikram et al.
MATERIALIA (2019)
In-situ high-energy X-ray characterization of neutron irradiated HT-UPS stainless steel under tensile deformation
Chi Xu et al.
ACTA MATERIALIA (2018)
The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt
M. Maric et al.
CORROSION SCIENCE (2018)
Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells
Decheng Kong et al.
ELECTROCHIMICA ACTA (2018)
Microstructure and corrosion performance of 316L stainless steel fabricated by Selective Laser Melting and processed through high-pressure torsion
Shahir Mohd Yusuf et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
Decheng Kong et al.
MATERIALS & DESIGN (2018)
Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing
M. S. Pham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Electrochemical and pitting corrosion resistance of AISI 4145 steel subjected to massive laser shock peening treatment with different coverage layers
J. Z. Lu et al.
OPTICS AND LASER TECHNOLOGY (2017)
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Qi Chao et al.
SCRIPTA MATERIALIA (2017)
Corrosion Behavior of Cold Rolled Type 316L Stainless Steel in HCl-Containing Environments
Benjamin Krawczyk et al.
CORROSION (2017)
Effect of cold deformation on the electrochemical behaviour of 304L stainless steel in contaminated sulfuric acid environment
Hong Luo et al.
APPLIED SURFACE SCIENCE (2017)
Effect of cold deformation on the corrosion behaviour of UNS S31803 duplex stainless steel in simulated concrete pore solution
Hong Luo et al.
CORROSION SCIENCE (2017)
Effect of rolling-induced microstructure on corrosion behaviour of an as-extruded Mg-5Li-1Al alloy sheet
Qing Xiang et al.
CORROSION SCIENCE (2017)
Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution
Hong Luo et al.
APPLIED SURFACE SCIENCE (2017)
Control of grain boundary connectivity based on fractal analysis for improvement of intergranular corrosion resistance in SUS316L austenitic stainless steel
Shigeaki Kobayashi et al.
ACTA MATERIALIA (2016)
Improving intergranular corrosion resistance in a nickel-free and manganese-bearing high-nitrogen austenitic stainless steel through grain boundary character distribution optimization
F. Shi et al.
CORROSION SCIENCE (2016)
The effect of deformation on metastable pitting of 304 stainless steel in chloride contaminated concrete pore solution
Xingguo Feng et al.
CORROSION SCIENCE (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Selective laser melting of stainless steel 316L with low porosity and high build rates
Zhongji Sun et al.
MATERIALS & DESIGN (2016)
The effect of extension twinning on the electrochemical corrosion properties of Mg-Y alloys
Guodong Zou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Grain boundary energy function for fcc metals
Vasily V. Bulatov et al.
ACTA MATERIALIA (2014)
Effect of molten pool boundaries on the mechanical properties of selective laser melting parts
Wen Shifeng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Effect of hot rolling and subsequent annealing on electrochemical discharge behavior of AP65 magnesium alloy as anode for seawater activated battery
Naiguang Wang et al.
CORROSION SCIENCE (2012)
A 3D dynamic analysis of thermal behavior during single-pass multi-layer weld-based rapid prototyping
Huihui Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Influence of nanocrystallization on pitting corrosion behavior of an austenitic stainless steel by stochastic approach and in situ AFM analysis
Li Liu et al.
ELECTROCHIMICA ACTA (2010)
Investigating accuracy of the Tafel extrapolation method in HCl solutions
E. Poorqasemi et al.
CORROSION SCIENCE (2009)
Effects of cold work and sensitization treatment on the corrosion resistance of high nitrogen stainless steel in chloride solutions
Yao Fu et al.
ELECTROCHIMICA ACTA (2009)
Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel
B. N. Mordyuk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering
V. K. William Grips et al.
THIN SOLID FILMS (2006)
Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues
LP Kubin et al.
SCRIPTA MATERIALIA (2003)
On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless steels
UK Mudali et al.
CORROSION SCIENCE (2002)
Chemical states of oxygen implanted in SUS 304 stainless steel and pure metals studied by in situ XPS using synchrotron radiation
Y Li et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Share Paper
