Related references
Note: Only part of the references are listed.Catalytic combustion performances, kinetics, reaction mechanisms and gas emissions of Lentinus edodes
Huihuang Zou et al.
BIORESOURCE TECHNOLOGY (2020)
Effects of alumina trihydrate (ATH) and organic montmorillonite (OMMT) on asphalt fume emission and flame retardancy properties of SBS-modified asphalt
Xiaolong Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Co-pyrolysis behavior of sewage sludge and rice husk by TG-MS and residue analysis
Teng Wang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Combustions of torrefaction-pretreated bamboo forest residues: Physicochemical properties, evolved gases, and kinetic mechanisms
Jinwen Hu et al.
BIORESOURCE TECHNOLOGY (2020)
Combusting behavior and pyrolysis products evaluation of SARA components separated from bitumen
Dong Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Co-combustion of textile dyeing sludge with cattle manure: Assessment of thermal behavior, gaseous products, and ash characteristics
Junhui Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Development of environmentally friendly flame retardant to achieve low flammability for asphalt binder used in tunnel pavements
Yanping Sheng et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Co-combustion behavior of dyeing sludge and rice husk by using TG-MS: Thermal conversion, gas evolution, and kinetic analyses
Teng Wang et al.
BIORESOURCE TECHNOLOGY (2020)
Analysis of interfacial adhesion properties of nano-silica modified asphalt mixtures using molecular dynamics simulation
Zhengwu Long et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Pyrolysis of blend (oil palm biomass and sawdust) biomass using TG-MS
Arshad Adam Salema et al.
BIORESOURCE TECHNOLOGY (2019)
TG-FTIR-MS study of synergistic effects during co-pyrolysis of corn stalk and high-density polyethylene (HDPE)
Xingping Kai et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Effect of chlorine, sulfur, moisture and ash content on the partitioning of As, Cr, Cu, Mn, Ni and Pb during bituminous coal and pickling sludge co-combustion
Shaorui Zhang et al.
FUEL (2019)
Characteristics of dehydration during rice husk pyrolysis and catalytic mechanism of dehydration reaction with NiO/γ-Al2O3 as catalyst
Yuchen Zhou et al.
FUEL (2019)
The thermal behavior and kinetics of co-combustion between sewage sludge and wheat straw
Chengxin Wang et al.
FUEL PROCESSING TECHNOLOGY (2019)
Combustion behavior of refuse-derived fuel produced from sewage sludge and rice husk/wood sawdust using thermogravimetric and mass spectrometric analyses
Teng Wang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Thermal behaviors and harmful volatile constituents released from asphalt components at high temperature
Wenjing Xia et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Combustion kinetics of asphalt binder components and the release processes of gaseous products
Wenjing Xia et al.
COMBUSTION AND FLAME (2019)
Helianthus tuberosus as a promising feedstock for bioenergy and chemicals appraised through pyrolysis, kinetics, and TG-FTIR-MS based study
Muhammad Aamer Mehmood et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
The study of sulphur retention characteristics of biomass briquettes during combustion
Kuihua Han et al.
ENERGY (2019)
Assessing thermal behaviors and kinetics of (co-)combustion of textile dyeing sludge and sugarcane bagasse
Wenhao Xie et al.
APPLIED THERMAL ENGINEERING (2018)
Influence of catalysts on co-combustion of sewage sludge and water hyacinth blends as determined by TG-MS analysis
Limao Huang et al.
BIORESOURCE TECHNOLOGY (2018)
Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis
Ranjeet Kumar Mishra et al.
BIORESOURCE TECHNOLOGY (2018)
The impact of co-combustion of polyethylene plastics and wood in a small residential boiler on emissions of gaseous pollutants, particulate matter, PAHs and 1,3,5-triphenylbenzene
Tomas Tomsej et al.
CHEMOSPHERE (2018)
Co-combustion of anthracite coal and wood pellets: Thermodynamic analysis, combustion efficiency, pollutant emissions and ash slagging
Feihong Guo et al.
ENVIRONMENTAL POLLUTION (2018)
Blending effect of sewage sludge and woody biomass into coal on combustion and ash agglomeration behavior
Hueon Namkung et al.
FUEL (2018)
Optimization of the co-combustion of coal and composite biomass pellets
Feihong Guo et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Comparative study of in-situ catalytic pyrolysis of rice husk for syngas production: Kinetics modelling and product gas analysis
Adrian Chun Minh Loy et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Thermogravimetric analysis of (co-)combustion of oily sludge and litchi peels: combustion characterization, interactions and kinetics
Chao Liu et al.
THERMOCHIMICA ACTA (2018)
Combustion mechanism of four components separated from asphalt binder
Huaquan Shi et al.
FUEL (2017)
Carbon, sulfur and nitrogen oxide emissions from combustion of pulverized raw and torrefied biomass
Xiaohan Ren et al.
FUEL (2017)
Preparation of carbon nanosheets from petroleum asphalt via recyclable molten-salt method for superior lithium and sodium storage
Yixian Wang et al.
CARBON (2017)
Investigation of co-combustion characteristics of sewage sludge and coffee grounds mixtures using thermogravimetric analysis coupled to artificial neural networks modeling
Jiacong Chen et al.
BIORESOURCE TECHNOLOGY (2017)
Combustion mechanism of asphalt binder with TG-MS technique based on components separation
Jiewen Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Gas evolution characteristics during pyrolysis and catalytic pyrolysis of coals by TG-MS and in a high-frequency furnace
Lu Ding et al.
FUEL (2015)
Coal pyrolysis characteristics by TG-MS and its late gas generation potential
Min Wang et al.
FUEL (2015)
Effects of sulfur on lead partitioning during sludge incineration based on experiments and thermodynamic calculations
Liu Jing-yong et al.
WASTE MANAGEMENT (2015)
Co-pelletization of sewage sludge and biomass: The density and hardness of pellet
Longbo Jiang et al.
BIORESOURCE TECHNOLOGY (2014)
An overview of the behaviour of biomass during combustion: Part II. Ash fusion and ash formation mechanisms of biomass types
Stanislav V. Vassilev et al.
FUEL (2014)
Assessment of marble waste utilization as an alternative sorbent to limestone for SO2 control
N. Emre Altun
FUEL PROCESSING TECHNOLOGY (2014)
100% recycled hot mix asphalt: A review and analysis
Martins Zaumanis et al.
RESOURCES CONSERVATION AND RECYCLING (2014)
The kinetic analysis of the pyrolysis of agricultural residue under non-isothermal conditions
Chao Gai et al.
BIORESOURCE TECHNOLOGY (2013)
Reclaimed asphalt concretes with high recycling rates: Changes in reclaimed binder properties according to rejuvenating agent
A. Dony et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Combustion behavior and pollutant emission characteristics of RDF (refuse derived fuel) and sawdust in a vortexing fluidized bed combustor
Feng Duan et al.
ENERGY (2013)
Fluidized bed desulfurization using lime obtained after slow calcination of limestone particles
Fabrizio Scala et al.
FUEL (2013)
An overview of the behaviour of biomass during combustion: Part I. Phase-mineral transformations of organic and inorganic matter
Stanislav V. Vassilev et al.
FUEL (2013)
Performance characteristics of plant produced high RAP mixtures
Walaa Mogawer et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2012)
Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction
Rodrigo Miro et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Study on combustion mechanism of asphalt binder by using TG-FTIR technique
Tao Xu et al.
FUEL (2010)
A TG-FTIR investigation into smoke suppression mechanism of magnesium hydroxide in asphalt combustion process
Tao Xu et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2010)
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Haiping Yang et al.
FUEL (2007)
Investigations on the influence of additives for SO2 reduction during high alkaline biomass combustion
KJ Wolf et al.
ENERGY & FUELS (2005)