Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings

To better deal with the radioactive iodine generated during the development of nuclear energy, B2O3, Bi2O3, ZnO, and SiO2 were used to sinter borosilicate glass for the immobilization of iodine. The effect of B2O3 on glass formation was discussed by changing the molar ratio of B2O3 in the matrix. When B2O3 content is 50 mol% and sintering temperature is 600 degrees C, the amorphous degree of quaternary glass is the highest. The sintered body with the highest degree of amorphous was selected to study radioactive iodine. Then, the effects of different iodine loading concentrations for sintering borosilicate glass in terms of microstructure and phase change were discussed. With the increase in iodine content on silica-gel, the degree of amorphous of the specimens presented a decreasing trend, and there are obvious SiO2 peaks. When the content was 20 wt.%-30 wt.%, a large number of new phases were generated. When the iodine content is 20 wt.%, in addition to the enrichment of Si and O elements, the elemental distribution for B, Bi, Zn, I, and Ag was even. TEM results also showed that there was a crystalline phase in the sinter.

Automated summary

In order to immobilize radioactive iodine generated during nuclear energy development, borosilicate glass was sintered using B2O3, Bi2O3, ZnO, and SiO2. The addition of B2O3 significantly affected the glass formation, and increasing iodine loading concentrations resulted in changes in microstructure and phase transformation of the glass.