Radioactive cesium ion removal from wastewater using polymer metal oxide composites

Radioactive cesium ion (Cs-137) removal from wastewater was investigated by novel composite adsorbents, chitosan-bone powder (CS-KT) and chitosan-bone powder-iron oxide (CS-KT-M) at 25 and 50 degrees C. The characterization of adsorbents was performed by Fourier-Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Brunauer-Emmett-Teller and Barrett-Joyner-Hallenda (BET-BJH), and Atomic Force Microscopy (AFM) analyses. While BET surface areas of CS-KT and CS-KT-M adsorbents were found to be 131.5 and 144.9 m(2)/g, respectively, average pore size and pore volume values were 4.69 nm/0.154 cm(3)/g and 7.49 nm/0.271 cm(3)/g, respectively. Amongst Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) models, Langmuir model fits well for Cs+ ion sorption by these adsorbents. The maximum adsorption capacity obtained from Langmuir adsorption isotherm was 0.98 x 10(-4) mol/g at 25 degrees C, and 1.16 x 10(-4) mol/g at 50 degrees C for CS-KT; it was found to be 1.79 x 10(-4) mol/g at 25 degrees C and 2.24 x 10(-4) mol/g at 50 degrees C for CS-KT-M. FT-IR analyses showed that Cs+ sorption occurs by its interaction with CO32-, PO43- and -NH2 groups. The average adsorption energy E was calculated as ca.11 kJ/mol from D-R adsorption isotherm. The adsorption kinetics was interpreted well by pseudo-second order model.

Automated summary

The study investigates the removal of radioactive cesium ion (Cs-137) from wastewater using novel composite adsorbents. Characterization of the adsorbents and Cs+ ion sorption process were analyzed. Langmuir model was found to be suitable for the adsorption of Cs+ ion by the adsorbents, along with determination of various parameters like pore size and pore volume.