Related references
Note: Only part of the references are listed.Multicriteria Analysis for Retrofitting of Natural Gas Melting and Heating Furnaces for Sustainable Manufacturing and Industry 4.0
Aprimelvaro J. Arnal et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)
Exergetic, energetic and life cycle assessments of the modified claus process
Samane Zarei
ENERGY (2020)
Mineral resources in life cycle impact assessment: part II - recommendations on application-dependent use of existing methods and on future method development needs
Markus Berger et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2020)
Mineral resources in life cycle impact assessment-part I: a critical review of existing methods
Thomas Sonderegger et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2020)
Evaluation of the efficiency and sustainability of timber-based construction
Jozef Svajlenka et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A critical view on the current application of LCA for new technologies and recommendations for improved practice
Coen van der Giesen et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Exergy and exergoeconomic analyses of a combined cooling, heating, and power (CCHP) system based on dual-fuel of biomass and natural gas
Kun Yang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Energetic, exergetic, economic and environmental (4E) analysis and multi-factor evaluation method of low GWP fluids in trans-critical organic Rankine cycles
Cheng Zhang et al.
ENERGY (2019)
Exergy-based analysis combined with LCA for waste heat recovery in coal-fired CHP plants
Qi Zhang et al.
ENERGY (2019)
Exergoeconomic and exergoenvironmental comparison of diesel-biodiesel blends in a direct injection engine at variable loads
Eduardo J. C. Cavalcanti et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Emergy-based life-cycle assessment (Em-LCA) for sustainability assessment: a case study of laser additive manufacturing versus CNC machining
Qiuhong Jiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Three pillars of sustainability: in search of conceptual origins
Ben Purvis et al.
SUSTAINABILITY SCIENCE (2019)
Multi-dimensional life cycle assessment of decentralised energy storage systems
Lydia Stougie et al.
ENERGY (2019)
Ecological cumulative exergy consumption analysis of organic Rankine cycle for waste heat power generation
Shukun Wang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Circular economy performance assessment methods: A systematic literature review
Claudio Sassanelli et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Review of Sustainability Assessment Approaches Based on Life Cycles
Christina Wulf et al.
SUSTAINABILITY (2019)
Advanced exergy, exergo-economic and exrgo-environmental analyses of a solar based trigeneration energy system
Hadis Montazerinejad et al.
APPLIED THERMAL ENGINEERING (2019)
Hybrid Exergetic Analysis-LCA approach and the Industry 4.0 paradigm: Assessing Manufacturing Sustainability in an Italian SME
Michele Dassisti et al.
SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY (2019)
Exergy: A universal metric for measuring resource efficiency to address industrial decarbonisation
Ana Gonzalez Hernandez et al.
SUSTAINABLE PRODUCTION AND CONSUMPTION (2019)
Waste-to-energy: A review of life cycle assessment and its extension methods
Zhaozhi Zhou et al.
WASTE MANAGEMENT & RESEARCH (2018)
Exergy and exergoeconomic analyses with modeling for CO2 allocation of coal-fired CHP plants
Jintong Gao et al.
ENERGY (2018)
Exergetic, environmental and economic sustainability assessment of stationary Molten Carbonate Fuel Cells
Andi Mehmeti et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Environmental and exergetic impacts of cement production: A case study
Amir Shirkhani et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2018)
Advanced life cycle integrated exergoeconomic analysis of building heating systems: An application and proposing new indices
Emin Acikkalp et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Exergoeconoenvironmental analysis as a new concept for developing thermodynamically, economically, and environmentally sound energy conversion systems
Mortaza Aghbashlo et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Consolidating exergoeconomic and exergoenvironmental analyses using the emergy concept for better understanding energy conversion systems
Mortaza Aghbashlo et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Environmental and exergetic sustainability assessment of power generation from biomass
Lydia Stougie et al.
RENEWABLE ENERGY (2018)
Exergo-environmental life cycle assessment of biodiesel production from mutton tallow transesterification
Nahla Faleh et al.
RENEWABLE ENERGY (2018)
Thermo-ecological cost of electricity from renewable energy sources
Wojciech Stanek et al.
RENEWABLE ENERGY (2018)
Environmental impact and cost allocations for a dual product heat pump
Anderson Felipe Chaves Fortes et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Life cycle environmental impacts of saffron production in Iran
Majid Khanali et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
Exergoenvironmental analysis of a waste-based Integrated Combined Cycle (WICC) for heat and power production
Yannay Casas-Ledon et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations
Branislav Milanovic et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Systems Thinking for Life Cycle Sustainability Assessment: A Review of Recent Developments, Applications, and Future Perspectives
Nuri Cihat Onat et al.
SUSTAINABILITY (2017)
Exergy Life Cycle Assessment of electricity production from Waste-to-Energy technology: A Hybrid Input-Output approach
Matteo V. Rocco et al.
APPLIED ENERGY (2017)
Possibilities and consequences of the Total Cumulative Exergy Loss method in improving the sustainability of power generation
Lydia Stougie et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Co-firing: An exergoenvironmental analysis applied to power plants modified for burning coal and rice straw
Alvaro Restrepo et al.
RENEWABLE ENERGY (2016)
Concepts and fundamental equations in Thermodynamics with Finite Speed
S. Petrescu et al.
7TH INTERNATIONAL CONFERENCE ON ADVANCED CONCEPTS IN MECHANICAL ENGINEERING (2016)
Exergy Life Cycle Assessment of a Waste-to-Energy plant
Matteo V. Rocco et al.
CLEAN ENERGY FOR CLEAN CITY: CUE 2016 - APPLIED ENERGY SYMPOSIUM AND FORUM: LOW-CARBON CITIES AND URBAN ENERGY SYSTEMS (2016)
Exergy as a Measure of Resource Use in Life Cycle Assessment and Other Sustainability Assessment Tools
Goran Finnveden et al.
RESOURCES-BASEL (2016)
Exergetic Control Charts (Variability analysis in a real injection-moulding industrial application)
Michele Dassisti et al.
RESEARCH AND INNOVATION IN MANUFACTURING: KEY ENABLING TECHNOLOGIES FOR THE FACTORIES OF THE FUTURE - PROCEEDINGS OF THE 48TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2016)
Thermo-ecological cost of hard coal with inclusion of the whole life cycle chain
Wojciech Stanek et al.
ENERGY (2015)
The inclusion of economic and environmental factors in the ecological cumulative exergy consumption analysis of industrial processes
Shiying Yang et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Advances in exergy analysis: a novel assessment of the Extended Exergy Accounting method
M. V. Rocco et al.
APPLIED ENERGY (2014)
Emergy-based life cycle assessment (Em-LCA) for sustainability appraisal of infrastructure systems: a case study on paved roads
Bahareh Reza et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2014)
Integrating emergy into LCA: Potential added value and lingering obstacles
Marco Raugei et al.
ECOLOGICAL MODELLING (2014)
Thermo-ecological and exergy replacement costs of nickel processing
Adriana Dominguez et al.
ENERGY (2014)
Ecological Accounting Based on Extended Exergy: A Sustainability Perspective
Jing Dai et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)
Exergetic life cycle assessment of a grid-connected, polycrystalline silicon photovoltaic system
Christopher Koroneos et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2014)
Exergoenvironmental analysis of hybrid electric vehicle thermal management systems
H. S. Hamut et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Emerging approaches, challenges and opportunities in life cycle assessment
Stefanie Hellweg et al.
SCIENCE (2014)
Revision and Extension of Eco-LCA Metrics for Sustainability Assessment of the Energy and Chemical Processes
Shiying Yang et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)
Exergy-based accounting for land as a natural resource in life cycle assessment
Rodrigo A. F. Alvarenga et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2013)
Exergetic analysis in cane sugar production in combination with Life Cycle Assessment
Contreras Moya et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Resource use analysis of Pangasius aquaculture in the Mekong Delta in Vietnam using Exergetic Life Cycle Assessment
Sophie Huysveld et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Decomposition of embodied exergy flows in manufactured products and implications for carbon tariff policies
Mei Liao et al.
ASIA EUROPE JOURNAL (2013)
Improvements to Emergy Evaluations by Using Life Cycle Assessment
Benedetto Rugani et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)
Exergetic life cycle assessment of a hydrogen production process
Ahmet Ozbilen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Addressing sustainability in the aluminum industry: a critical review of life cycle assessments
Gang Liu et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Exergy analysis and life cycle assessment of solar heating and cooling systems in the building environment
C. Koroneos et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Constructing a network of the social-economic consumption system of China using extended exergy analysis
Jing Dai et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
A Thermodynamically Correct Treatment of Externalities with an Exergy-Based Numeraire
Enrico Sciubba
SUSTAINABILITY (2012)
An LCA based indicator for evaluation of alternative energy routes
M. A. Rubio Rodriguez et al.
APPLIED ENERGY (2011)
Is sustainability a thermodynamic concept?
Enrico Sciubba et al.
INTERNATIONAL JOURNAL OF EXERGY (2011)
Exergy life cycle assessment model of CO2 zero-emission energy system and application
Wang Yun et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2011)
Development of social, environmental, and economic indicators for a small/medium enterprise
Abigail R. Clarke-Sather et al.
INTERNATIONAL JOURNAL OF ACCOUNTING AND INFORMATION MANAGEMENT (2011)
Environmental Performance of Sheet Metal Working Processes
Joost R. Duflou et al.
SHEET METAL 2011 (2011)
Exergoenvironmental Analysis - A New Approach to Support the Design for Environment of Chemical Processes?
Jens Buchgeister
CHEMICAL ENGINEERING & TECHNOLOGY (2010)
Estimation of the environmental impact of a petrochemical process using coupled LCA and exergy analysis
Jean-Francois Portha et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Exergoenvironmental analysis for evaluation of the environmental impact of energy conversion systems
Lutz Meyer et al.
ENERGY (2009)
Economies Evolve by Energy Dispersal
Arto Annila et al.
ENTROPY (2009)
Comparative Life Cycle Assessment of four alternatives for using by-products of cane sugar production
Ana M. Contreras et al.
JOURNAL OF CLEANER PRODUCTION (2009)
The Tenuous Use of Exergy as a Measure of Resource Value or Waste Impact
Kyrke Gaudreau et al.
Sustainability (2009)
Cumulative exergy extraction from the natural environment (CEENE):: a comprehensive life cycle impact assessment method for resource accounting
J. Dewulf et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)
Applying cumulative exergy demand (CExD) indicators to the ecoinvent database
Michael E. Boesch et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2007)
Thermo-ecological optimization of a solar collector
J. Szargut et al.
ENERGY (2007)
Social sustainability and social acceptance in technology assessment: A case study of energy technologies
G. Assefa et al.
TECHNOLOGY IN SOCIETY (2007)
Applying multi-objective genetic algorithms in green building design optimization
WM Wang et al.
BUILDING AND ENVIRONMENT (2005)
Expanding exergy analysis to account for ecosystem products and services
JL Hau et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2004)
New exergy criterion in the multi-criteria context: a life cycle assessment of two plaster products
G Beccali et al.
ENERGY CONVERSION AND MANAGEMENT (2003)
Application of thermoeconomics to the allocation of environmental loads in the life cycle assessment of cogeneration plants
A González et al.
ENERGY (2003)
The value of the exergetic life cycle assessment besides the LCA
RL Cornelissen et al.
ENERGY CONVERSION AND MANAGEMENT (2002)
Assessment of the sustainability of technology by means of a thermodynamically based life cycle analysis
J Dewulf et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2002)
Aggregation and the role of energy in the economy
CJ Cleveland et al.
ECOLOGICAL ECONOMICS (2000)
Share Paper
