Related references
Note: Only part of the references are listed.Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates
Jinyan Shi et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Study on the improvement of the waterproof and mechanical properties of hemihydrate phosphogypsum-based foam insulation materials
Qiang Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of foaming gas and cement type on the thermal conductivity of foamed concrete
Tian Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Use of green calcium sulphoaluminate cement to prepare foamed concrete for road embankment: A feasibility study
Zhi Ge et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate
Osman Hulusi Oren et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO2
Lei Lang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Environmental impact and quality assessment of using eggshell powder incorporated in lightweight foamed concrete
Hock Yong Tiong et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cycles
Shenghao Zuo et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Fabrication of superhydrophobicity on foamed concrete surface by GO/silane coating
Yongjuan Geng et al.
MATERIALS LETTERS (2020)
Physical & mechanical properties of fiber reinforced metakaolin-based geopolymer concrete
Amir Bahador Moradikhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical and durability properties of hybrid fiber reinforced foam concrete
Bhagyasree Raj et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Heat damage of concrete surfaces under steam curing and improvement measures
Jinyan Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste
Zhiming Ma et al.
CEMENT & CONCRETE COMPOSITES (2020)
Preparation and characterization of lightweight aggregate foamed geopolymer concretes aerated using hydrogen peroxide
Jinyan Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Engineering properties evaluation of unfired sludge bricks solidified by cement-fly ash-lime admixed nano-SiO2 under compaction forming technology
Lei Lang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Characterization and cooling effect of a novel cement-based composite phase change material
Du Yinfei et al.
SOLAR ENERGY (2020)
The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review
Qin Tang et al.
CEMENT & CONCRETE COMPOSITES (2020)
Review on designs and properties of multifunctional alkali-activated materials (AAMs)
Zhuo Tang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Design and preparation of ultra-high performance concrete with low environmental impact
Ye Shi et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Reutilization of dredged harbor sediment and steel slag by sintering as lightweight aggregate
Yee Cheng Lim et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)
Progress in manufacture and properties of construction materials incorporating water treatment sludge: A review
Samuel de Carvalho Gomes et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Effect of foaming agent on physical and mechanical properties of alkali-activated slag foamed concrete
Juan He et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Properties of High-Early-Strength Aerated Concrete Incorporating Metakaolin
Cong Ma et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Preparation and properties of ultra-lightweight EPS concrete based on pre-saturated bentonite
Yue Xie et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Preparation of high porosity bricks by utilizing red mud and mine tailing
Youngjae Kim et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Preparation and characterization of ultra-lightweight foamed geopolymer (UFG) based on fly ash-metakaolin blends
Jiandong Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Production of lightweight aerated alkali-activated slag pastes using hydrogen peroxide
Murat Sahin et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A simple novel mix design method and properties assessment of foamed concretes with limestone slurry waste
Rajesh Kumar et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Recycling dredged sediment into fill materials, partition blocks, and paving blocks: Technical and economic assessment
Lei Wang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Pore structure analysis and properties evaluations of fly ash-based geopolymer foams by chemical foaming method
Fang Xu et al.
CERAMICS INTERNATIONAL (2018)
Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: Reaction mechanism, engineering properties and leaching behaviors
Dengquan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A study of city-level building energy efficiency benchmarking system for China
Zheng Wei et al.
ENERGY AND BUILDINGS (2018)
Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete
Z. Y. Qu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag
X. Gao et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Mechanical and thermal properties of graphene sulfonate nanosheet reinforced sacrificial concrete at elevated temperatures
Hong-yan Chu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Thermomechanical performance of blended metakaolin-GGBS alkali-activated foam concrete
Gabriel Samson et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Investigation on a green olivine nano-silica source based activator in alkali activated slag-fly ash blends: Reaction kinetics, gel structure and carbon footprint
X. Gao et al.
CEMENT AND CONCRETE RESEARCH (2017)
Arsenic-containing soil from geogenic source in Hong Kong: Leaching characteristics and stabilization/solidification
Jiang-Shan Li et al.
CHEMOSPHERE (2017)
Investigation of the leaching behavior of lead in stabilized/solidified waste using a two-year semi-dynamic leaching test
Qiang Xue et al.
CHEMOSPHERE (2017)
Properties and pozzolanic reactivity of flash calcined dredging sediments
Ruben Snellings et al.
APPLIED CLAY SCIENCE (2016)
Properties of foamed concrete containing water repellents
Cong Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete
Ali A. Sayadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Design and performance evaluation of ultra-lightweight geopolymer concrete
D. M. A. Huiskes et al.
MATERIALS & DESIGN (2016)
Ultra-lightweight concrete: Conceptual design and performance evaluation
Q. L. Yu et al.
CEMENT & CONCRETE COMPOSITES (2015)
Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete
Ning Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Mechanical and thermal properties of lightweight concretes with vermiculite and EPS using air-entraining agent
Adilson Schackow et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Recycling steel-manufacturing slag and harbor sediment into construction materials
Yu-Ling Wei et al.
JOURNAL OF HAZARDOUS MATERIALS (2014)
Studies on some factors affecting CO2 curing of lightweight concrete products
Caijun Shi et al.
RESOURCES CONSERVATION AND RECYCLING (2008)
Mechanical properties of polymer-modified concretes containing expanded polystyrene beads
Bing Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Isothermal moisture properties of Clayey Cellular Concretes elaborated from clayey waste, cement and aluminium powder
M. S. Goual et al.
CEMENT AND CONCRETE RESEARCH (2006)
Fire-resistant geopolymer produced by granulated blast furnace slag
TW Cheng et al.
MINERALS ENGINEERING (2003)
Share Paper
