Related references
Note: Only part of the references are listed.Analysis and reduction of process energy consumption and thermal deformation in a micro-structure wire electrode electric discharge machining thin-wall component
Guojun Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A comprehensive review of electric discharge machining of advanced ceramics
Wuyi Ming et al.
CERAMICS INTERNATIONAL (2020)
Multi-Objective Optimization for China's Power Carbon Emission Reduction by 2035
Wu Jianjun et al.
JOURNAL OF THERMAL SCIENCE (2019)
Analysis of energy use and greenhouse gas emissions (GHG) of transplanting and broadcast seeding wetland rice cultivation
Suha Elsoragaby et al.
ENERGY (2019)
Energy optimization and greenhouse gas emissions mitigation for agricultural and horticultural systems in Northern Iran
Fatemeh Mostashari-Rad et al.
ENERGY (2019)
Life cycle energy consumption and greenhouse gas emissions of iron pelletizing process in China, a case study
Wei Lv et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Energy technological progress, energy consumption, and CO2 emissions: Empirical evidence from China
Wei Gu et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Effect of diluted dielectric medium on spark energy in green EDM process using TGRA approach
T. Muthuramalingam
JOURNAL OF CLEANER PRODUCTION (2019)
Sustainable electrical discharge machining using water in oil nanoemulsion
Hang Dong et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Evaluation of EDM process for green manufacturing
Xianlin Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Multi-objective optimization based IBCS for surface roughness and textural feature in MCVE piston machining
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Analysis and optimization of process energy consumption and environmental impact in electrical discharge machining of titanium superalloys
Zhen Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Sustainability in wire electrical discharge machining of titanium alloy: Understanding wire rupture
A. Pramanik et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Application of data envelopment analysis approach for optimization of energy use and reduction of greenhouse gas emission in peanut production of Iran
Homa Hosseinzadeh-Bandbafha et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Sustainable machining: Process energy optimisation of wire electrodischarge machining of Inconel and titanium superalloys
Janaka R. Gamage et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Selection of optimum parameters in multi-pass face milling for maximum energy efficiency and minimum production cost
Congbo Li et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Optimization of process parameters of green electrical discharge machining using principal component analysis (PCA)
Jagadish et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Application of teaching learning based optimization procedure for the development of SVM learned EDM process and its pseudo Pareto optimization
Ushasta Aich et al.
APPLIED SOFT COMPUTING (2016)
Process level environmental performance of electrodischarge machining of aluminium (3003) and steel (AISI P20)
Janaka R. Gamage et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Modeling multiple-response environmental and manufacturing characteristics of EDM process
A. Garg et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Multi-response optimization of Micro-EDM process parameters on AISI304 steel using TOPSIS
R. Manivannan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Optimization of EDM process parameters in machining Si3N4-TiN conductive ceramic composites to improve form and orientation tolerances
L. Selvarajan et al.
MEASUREMENT (2016)
A new cuckoo search algorithm for 2-machine robotic cell scheduling problem with sequence-dependent setup times
Arindam Majumder et al.
SWARM AND EVOLUTIONARY COMPUTATION (2016)
Steps towards green manufacturing through EDM process: A review
Nishant K. Singh et al.
COGENT ENGINEERING (2016)
The Paris Climate Agreement and China's Role in Global Climate Governance
Yu Hongyuan
CHINA QUARTERLY OF INTERNATIONAL STRATEGIC STUDIES (2016)
An ANFIS-based cache replacement method for mitigating cache pollution attacks in Named Data Networking
Amin Karami et al.
COMPUTER NETWORKS (2015)
Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production
Ibrahem Maher et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Variations in PM10, PM2.5 and PM1.0 in an Urban Area of the Sichuan Basin and Their Relation to Meteorological Factors
Yang Li et al.
ATMOSPHERE (2015)
Study on the influence of micro-EDM process parameters during machining of Ti-6Al-4V superalloy
A. P. Tiwary et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
A hybrid process model for EDM based on finite-element method and Gaussian process regression
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDM
Wuyi Ming et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Cuckoo search algorithm: a metaheuristic approach to solve structural optimization problems
Amir Hossein Gandomi et al.
ENGINEERING WITH COMPUTERS (2013)
Mathematical and numerical modeling of the effect of input-parameters on the flushing efficiency of plasma channel in EDM process
Mohammadreza Shabgard et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
Carmita Camposeco-Negrete
JOURNAL OF CLEANER PRODUCTION (2013)
Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments
Emel Kuram et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Optimization by Grey Relational Analysis of EDM Parameters on Machining Ti-6Al-4V
Zhiping Xie et al.
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3 (2011)
The effect of process parameters on machining of magnesium nano alumina composites through EDM
K. Ponappa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Development of an intelligent process model for EDM
S. N. Joshi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Pragmatic mass closure study for PM1.0, PM2.5 and PM10 at roadside, urban background and rural sites
Jianxin Yin et al.
ATMOSPHERIC ENVIRONMENT (2008)
A review on current research trends in electrical discharge machining (EDM)
Norliana Mohd Abbas et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis
Ko-Ta Chiang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
State of the art electrical discharge machining (EDM)
KH Ho et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Probability of precision micro-machining of insulating Si3N4 ceramics by EDM
A Muttamara et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)